Red RC » Tekno RC

March 29, 2012

FTW Exabyte body for Tekno V4 conversions

FTW Racing Components today introduced Exabyte, the only purpose-built body for the Tekno V4 conversions. Sleek styling belies Exabyte’s spacious interior, with clearance for 50mm tall LiPos and large ESCs. Intakes direct cool air toward the ESC while the rear of the body is open to remove hot air. For optimum fit, Exabyte is available in two versions to fit the body mounts of the most popular Tekno conversions—the Mugen MBX6 and the Hot Bodies D8. Both fit all Tekno V4 conversions when secured by Velcro in lieu of the body mounts. Exabyte for Tekno V4/MBX6 and Tekno V4/D8 are molded from clear .040” polycarbonate and come in clear with a protective film and molded cut lines. Window masks and decal sheets are included.

View more images of the Exabyte here

November 9, 2011

Tekno RC M8 drive shafts for D8/Ve8

Continuing their line of driveline components, Tekno RC have released these complete drive shafts for the Hot Bodies D8/Ve8 and HPI Vorza/D8s vehicles. The Tekno RC M8 drive shafts will get you to the finish line without ejecting a drive pin or breaking a shaft and they include their legendary stub axles with retainer rings and all new drive shaft/barrel design. A hardened steel construction and black oxidized finish provide supreme durability and 3 pairs of drive pin holes means you can rebuild and reuse the stub axles. These drive shafts are .5mm longer than the Hot Bodies WCE shafts (1.5mm longer than stock) and allow full droop in the front and rear without interference.

Source: Tekno RC [teknorc.com]

August 24, 2011

Tekno RC Baja 5B universal shafts

Designed by Tekno RC and tested in Southern California this is the first true universal driveshaft system available for the beast that is the Baja 5B. CNC machined out of high grade steel, then hardened and black oxidized for improved durability and wear they are completely rebuildable with replacement parts sold separately.

Source: Tekno RC [teknorc.com]

July 20, 2011

Tekno RC M5 pinion gears

Tekno RC release their new line of M5 Mod1 pinion gears for 1/8th electric and any other application that needs Mod1 gears. Available from 11 up to 30 teeth the pinions are precision machined from steel and hardened for durability. They feature 5mm bore, an M5 set screw and a laser-etched size identification.

Source: Tekno RC [teknorc.com]

July 13, 2010

Tekno RC HB D8/T option parts

Tekno RC have released a whole range of new parts for the Hot Bodies D8, D8T, Ve8 and Vorza. New Stub Axles and Diff Couplers feature hardened steel, precision tolerances & snap rings ensure worry free usage. Center shaft couplers and stub axles also come with 3 sets of drive pin holes to extend the life of each part. The new lightened LCG chassis is the ultimate chassis upgrade for your Hot Bodies D8T Nitro Truggy and is 37g/1.4oz lighter than stock and features a low CG cutout design that lowers the engine and radio tray by 1mm, with the fuel tank lowered by 2mm. CNC machined from 4mm aircraft grade 7075-T6 aluminium, it has been hard anodized for increased wear resistance and the under side edge has been beveled to help cruise over rough terrain.

View all the other parts here

October 14, 2009

Tekno RC D8/T & Losi wing mount & Shock towers

Tekno RC have announced some hot new products for the Losi 8 and Hot Bodies D8 line of 1/8th scale vehicles. First up is the new adjustable wing mount for the Losi 8B/8T (and D8/D8T/Ve8). A direct fit for the Losi it is made from an extremely durable plastic composite and has adjustable angle and height. No more body clips to hold on the wing, instead screws take up this task for a tightly fitted wing. The new wing mount is also designed to fit the Hot Bodies D8/D8T/Ve8/Vorza line using of one of their 3 new shock towers. The new rear shock towers are machined from 5mm thick 7075 T6 aluminium and are lighter and stronger than stock and are hard anodized for a sleek appearance. By using the bulkhead as an attachment point for the wing rather than simply attaching it only to the shock tower, the new wing mount and shock tower combo is far more durable than stock. Finally there are two separate towers for the D8/Ve8/Vorza buggies, a standard stock replacement and one for the optional 112mm shocks. All of these shock towers accommodate the new Tekno RC Adjustable Wing Mount, the stock wing mount, or the Losi 8 wing mount.

Click here to see the shock towers

July 21, 2009

Tekno RC Mugen MBX-6 EP Conversion

Tekno RC has released their new V3 conversion kits for the Mugen MBX-6. The new kit has been optimized and balanced for the Mugen layout, with the battery and motor having been sunken in to the chassis to lower the CG further. It includes the new longer/adjustable battery tray as well as newly improved battery straps and is the same kit ran by some Mugen team drivers during pre-production testing. It has been track tested and recently won the RC Pro Series round 1 in the west coast, piloted by Drew Moller.

Source: Tekno RC [impaktrc.com]

June 19, 2009

Tekno RC Hot Bodies D8 LCG chassis

Tekno RC have released their lightened LCG Chassis for the Hot Bodies D8 buggy. Claiming to be the ultimate chassis upgrade for your D8, it is 90g/3.2oz lighter than stock, which is a 23% weight savings. Low CG cutout design lowers the engine and radio tray by 1mm, fuel tank is lowered by 2mm and integrated droop screws offer more precise droop adjustment and better wear. CNC machined from 4mm aircraft grade 7075-T6 aluminium it has been ard anodized for increased wear resistance

Source: Tekno RC [teknorc.com]