Red RC » Tekno RC

November 7, 2019

T-Works NB48 2.0 titanium shock standoffs

T-Works have announced the release of a titanium shock standoff set for the Tekno RC NB48 2.0 buggy. Machined from high-quality 64-grade titanium the shock mounts offer a lower weight than the standard steel standoffs while being less prone to corrosion at the same time. Due to the lower weight of the standoffs, the buggy‘s centre of gravity will be lowered which can be beneficial especially in high-grip track conditions. The set includes four standoffs and it is available now.

Source: T-Works [rc-tworks.com]

October 27, 2019

T-Works NB48 2.0 aluminium anti-roll bar spacers

T-Works have introduced a 4-piece set of aluminium anti-roll bar spacers for the Tekno RC NB48 2.0 buggy. Machined from high-quality aluminium the retainers ensure precise swaybar mounting and positioning and they come black anodised and with machined silver edge details for looks. Included in the set are four spacers and four grub screws.

Source: T-Works [rc-tworks.com]

October 24, 2019

Tekno NB48 2.0 carbon & brass optionals

Tekno RC have introduced new carbon fibre and brass option parts for the NB48 2.0 buggy. First up and designed to improve the look and handling of the NB48 2.0 buggy are carbon fibre shock towers. They add visual impact and can also improve bump handling and grip by being slightly more compliant than aluminium. When using front and rear carbon towers, the weight of the vehicle is reduced by 50 grams. This helps to slightly lower the centre of gravity and increases corner speed. At 5mm thick the shock stays are strong and easily withstand all but the most extreme race incidents.

Continue reading here

October 21, 2019

T-Works NB48 2.0 steel chassis skid protectors

T-Works have announced the release of their new stainless steel chassis skid protector sets for the Tekno RC NB48 2.0 buggy. The skid plates will provide additional chassis protection in the front and rear areas, something that comes in handy especially when running on highly abrasive surfaces or on track with large jumps. The protector plates are made of high-quality stainless steel material for durability and corrosion resistance and they are available as separate front and rear end sets including a pair of skid plates each.

View the rear chassis skid plate set here

October 15, 2019

T-Works NB48 2.0 titanium turnbuckles & screw sets

Coming from T-Works and made for Tekno RC’s new NB48 2.0 1/8th nitro buggy are a titanium turnbuckle set as well as two screw kits. Starting with the turnbuckles, the set includes a total of seven spanners for the steering, camber and servo links that help to reduce weight while offering higher corrosion resistance than standard steel turnbuckles. Also included are 4mm and 5mm turnbuckle wrenches for easy building and setup. As for the screw sets, coming soon are a 140-piece UFO head titanium and a 156-piece gold-colour steel screw kit. The titanium set will greatly lower the overall weight of the buggy while adding corrosion resistance. The gold-coloured set mainly adds visual impact but the surface coating also prevents the parts from collecting rust over time.

View samples of the screw sets here

October 1, 2019

Tekno RC introduce NB48 2.0 optionals

Tekno RC have announced the release of some new option and tuning parts that are designed to further enhance the performance of the NB48 2.0 buggy. First up are hard compound suspension arms that are made from a stiff composite material and are intended to be used in hot weather conditions or any time a more direct feeling is desired to sharpen up the handling. Tekno RC recommend using these arms when the ambient temperature is above 35 degrees Celsius but they are not as durable if used in temps below 5 degrees Celsius. No additional parts are required when replacing stock arms but they are 1mm longer and will require camber, toe, and bump-steer to be readjusted.

Continue reading here

September 13, 2019

Tekno NB48 2.0 1/8th nitro buggy kit

Following a couple of first teasers Tekno RC have fully unveiled their new NB48 2.0 1/8th scale nitro buggy kit. The buggy builds on a newly designed chassis that is 1mm thinner than the previous main plate, however due to its wider design its reduces twitchiness and improves handling and flex characteristics on rough tracks. The buggy also does not sport a traditional radio tray but separate radio and battery boxes as well as independent servo mounts for a more equal left/right chassis flex. Both the battery and receiver box are of the same dimensions, allowing to swap battery and receiver for weight bias changes.

Continue reading here

September 6, 2019

Tekno NB48 2.0 1/8th nitro off-road buggy – Coming soon

Tekno RC have announced the soon release of their new NB48 2.0 1/8th scale nitro off-road buggy. Utilising a completely new platform compared to the previous .4 kit, the 2.0 prototype was tested extensively by Tekno RC’s world wide team of factory drivers and it will be based on a new 3mm CNC-machined 7075 aluminium hard-anodised and lightened chassis. Other features include independent servo mounts with decoupled battery and radio boxes, CNC 7075 shock towers, pivot blocks, and motor mounts, rear hub and arm inserts for adjustable roll centre and toe, a long arm, narrow pivot suspension geometry, 1-piece wing mount and ultra-lightweight wing as well as a 2nd generation quick fuelling body. More details about the new design will become available soon.

Source: Tekno [teknorc.com]