Red RC » Tekno RC

June 7, 2019

MIP announce the release of more Bypass1 piston sets

MIP has completed its line of 1/8th scale Bypass1 off-road pistons and now include sets for Agama, JQRacing, SWorkz, Tekno and Xray. Featuring colour-codes valves, the Bypass1 pistons combined together with these valves allow to control and maximise the car’s performance based on which valves used. Thicker valves generate a slower rebound and thinner valves get quicker rebounds. Each set includes four pistons and a set of three different valves. The Agama set includes 6+2 pistons, the JQRacing specific sets consists of 6+6 hole pistons, the SWorkz kit includes 6-hole pistons, the Tekno set is a 6+6 hole variant and the Xray compatible set also includes 6+6 pistons. The set will become available by end of July.

Source: MIP [miponline.com]

May 30, 2019

Tekno 1/8th scale large radius spring perch set

Tekno have introduced their new 1/8th scale large radius spring perch set for their 1/8th scale vehicles. The locking shock rod end and spring perch set features an updated design to drastically increase the life of the shock boots. In this new set, the spring perch has been redesigned with a large radius at the top of the slot where the perch slips over the shock shaft, eliminating a sharp edge that could quickly damage the shock boot. Less shock boot tearing means the shocks will be more consistent between rebuilds with less dirt and dust being allowed in, which also preserves the shock shafts and O-rings. This new spring perch set features the same tall spring perch design as the previous #TKR6140B shock rod end and spring perch set and is made from the same durable composite plastic. Compatible with all Tekno RC 1/8th vehicles as well as the SCT410 and MT410.

Source: Tekno [teknorc.com]

May 22, 2019

Avid EB410/ET410 titanium shock standoffs V2

Coming from Avid and made for the Tekno EB410 and ET410 kits are the new FastTune titanium shock stand offs. They are replacements for the new #TKR6527B standoff that use the keyed shock bushings #TKR6780. They include Avid’s FastTune feature which allows to use a common 1.5mm Allen wrench to prevent the standoff from spinning while using a 5.5mm socket wrench on the other side. The other solutions out there require to either take the shock completely off the standoff to reach the 7.0mm nut or to use a 7.0mm open-ended socket wrench. In addition to being easier to wrench on they help to lose some weight from the highest point on the car by switching from steel to titanium. The set includes four shock standoffs machined from billet 6Al-4V titanium.

Source: Avid [avidrc.com]

May 5, 2019

T-Works EB410/ET410 titanium captured rear hinge pins

T-Works have announced the release of captured titanium rear outer hinge pins for the Tekno RC EB410 and ET410 kits. The design of the suspension shafts improves overall reliability due to the captured design while the lightweight and corrosion resistant titanium material reduces unsprung masses. The set includes a pair of hinge pins and suitable nyloc nuts.

Source: T-Works [rc-tworks.com]

March 12, 2019

T-Works EB/ET410 stainless steel chassis protectors

Made for the Tekno RC EB410 and ET410 kits are two new stainless steel chassis protector sets from T-Works. Coming separately for the front or the rear of the vehicles, the sets include two skid plates each that were designed to be a direct fit and to protect the chassis overhangs from becoming overall damaged on abrasive surfaces or when running on tracks with large jumps.

View the rear skid plates here

March 5, 2019

Tekno EB/ET410 shock standoffs & bushings

Tekno RC have announce the release of two new option parts to improve the longevity of the popular EB410 and ET410 vehicles. First up are new shock standoffs that allow the shock to only pivot between the standoff and bushing, moving the wear surface to the bushing itself and increasing the life of the cap. The standoff are made from high-quality steel, they fit the EB410 and ET410 vehicles and must be used with below’s keyed shock bushings. The bushings are designed to snap in and key with the top surface, making it virtually impossible for the bushing to rotate and wear the cap. Instead, the wear surface has been moved to the shock bushing itself reducing the cost to maintain your suspension. The bushings are made from durable composite plastic and fit the Tekno RC 1/10th scale shock caps TKR6712 and TKR6712A only.

View the shock bushings here

February 13, 2019

Exotek EB410 3.4mm HD hinge pin set

Exotek have introduced a set of heavy duty 3.4mm hardened steel inner hinge pins for the Tekno EB410 and ET410 vehicles. The larger centre section helps prevent bent or busted pins while keeping the stock 3mm diameter at the ends in order to fit the stock inserts and while also only slightly enlarging the arm holes to maintain arm strength. The set, that is recommended for experienced hobbyists only, includes four hinge pins and a high speed drill bit to ream the arms to accept the larger hardened hinge pins.

View another image here

January 31, 2019

JConcepts ET410 Finnisher truck body shell

Coming from JConcepts and made for the Tekno ET410 1/10th scale 4WD truck is a dedicated Finnisher body shell. One of the latest classes to hit the scene is the 1/10th truggy class and Tekno has been leading edge in this department with the release of the ET410. JC’s Finnisher body incorporates pre-dimpled locations for the ET410 and it features a slight cab forward, raked windshield and aggressive stance to highlight a performance oriented core. A wide front hood scoop allows plenty of clearance for the unique shock geometry and the body incorporates a large centre fin which begins on the roof line and finishes just past the half-way point on the bed. Chin spoiler, headlight and grille protect the front-end from unwanted up-drafts during flight while the supplied decals stand-out like an 18 wheeler. The Finnisher has a built-in air escape passage on the roof which allows the customer to fine-tune the body for maximum outdoor performance. The new body is produced with name plates which provide additional high-speed stability and improved positioning of the rear bed rails to strengthen the assembly. Overall handling has been improved by balancing the bias between the cab location and rear wing placement. Each body comes with window masks, decal sheet, and rear S-Type wing.

View more images here