Red RC » Traxxas

November 19, 2016

STRC Traxxas 2WD front brace & battery hold down

ST Racing Concepts have introduced two new option parts for the Traxxas 1/10th 2WD series of vehicles such as the Stampede, Rustler, Bandit and Slash. Aimed towards the Stampede and Blackfoot trucks is the new front suspension hinge-pin brace kit featuring a heavy duty CNC Machined aluminium front hinge-pin brace complete with a pair of heat treated polished steel hinge-pins with lock-nuts. The set provides more durability against impact to the front suspension arms of Traxxas’s 2WD trucks and it fits the Rustler/Bandit and Slash 2WD as well.

Continue reading here

November 10, 2016

Traxxas 2017 Ford Raptor replica

New from Traxxas comes the 2017 Ford Raptor replica. The sleek Raptor body is fully detailed with an injection molded nylon composite grill and front bumper to truly capture the depth and detail of Ford’s original design. Integrated hood vents and side mirrors complete the look. The heavy-duty body is extra tough for all your off-roading adventures and is wrapped around the proven performance and unmatched durability of the Traxxas Slash. Power comes from the powerful Titan 12-Turn motor and XL-5 electronic speed control for instant response off-road. Full-ball bearings enhance precision control while the electronics are all fully waterproof so your fun never gets sidelined by a little water along the way.

View more details here

October 4, 2016

RPM X-Maxx wheelie bar & rear bumper mount

Coming from RPM and made for the Traxxas X-Maxx monster truck are the low visibility wheelie bar and the rear bumper mount. Starting with the wheelie bar, the part was designed to take stress off of the low hanging rear bumper whenever the rear end wants to drag on the ground. The wheels we designed are large enough to touch down before the rear bumper does in 99 percent of normal acceleration wheelies, eliminating the fears of blowing the rear bumper off of the truck or using the rear bumper as a plow. The set includes all needed parts and in only works with RPM’s rear bumper mount.

Continue reading here

September 14, 2016

Traxxas Bigfoot 1/10th 2WD RTR monster truck

Coming from Traxxas is the Bigfoot 1/10th scale 2WD ready-to-run monster truck. Named after the iconic Bigfoot full-scale monster truck the 1/10th scale variant captures the power and spirit of the original with its high ground clearance 2WD chassis, the officially licensed truck body – available in two colour variants – and authentic shaved monster truck tyres. The vehicle comes factory assembled and it features Traxxas’ proven Magnum 272 gearbox with slipper clutch, the suspension is equipped with oil-filled shock absorbers and the truck comes including a 12T 550-size brushed motor, the waterproof XL-5 speed controller and enclosed receiver compartment. Also included is the TQ 2.4GHz radio system, a Traxxas iD-equipped 7-cell NiMH battery pack and a 4-amp DC peak-detecting fast charger.

View more images here

September 8, 2016

DE Racing Speedway SC 1/10th oval racing wheels

Coming from DE Racing are the Speedway SC wheel for 1/10th scale oval racing using SC-based Modified or Late Model kits. They feature the Sure-Lock system, which is comprised of radial ribs that lock the wheel and foam insert together, eliminating many inconsistencies that come from an insert that is free to move around, such as pressing the wheel out from the center of the tyre. The wheel fit most 2.2″/3.0″ short course tyres and it is available for the Team Associated SC10/SC5M and the front and rear of the Traxxas Slash.

View the Traxxas Slash wheel here

September 1, 2016

RPM X-Maxx oversized rear axle carriers

Coming from RPM and made for the Traxxas X-Maxx monster truck are new oversized wheel axle carriers. They were designed to solve two key issues, the first being durability. RPM designed these carriers to handle some serious abuse with massive support ribs for the strongest possible carriers available. The other area of improvement comes in the form of larger inner bearings. The stock inner bearings are a mere 20x27x4mm while the oversized bearings are gigantic 20x32x7mm bearings. That equates to a dynamic load rating that is nearly 300 percent higher than the stock bearing while the static load rating is over 300 percent higher. The hub carriers come including the new inner bearings while the outer bearings are the stock Traxxas ones.

Source: Traxxas [traxxas.com]

August 24, 2016

JConcepts Ford F-250 Super-Duty SuperCab MT body

Made for 1/10th scale monster trucks such as the Traxxas Stampede and HPI Wheely King is JConcepts’ new Ford F-250 Super-Duty SuperCab bodyshell. Resembling the 2011 variant of Ford’s popular pick-up truck, the body features the SuperCab design with recessed and sliding rear window treatment mated with spot-on wheel well size for a mini monster and fender flares that blend to form the unmistakable Super Duty look. The bed area is flat and resembles that smooth bed cover look of the full-scale monster vehicles. The structure of the bed features ridged detail, tailgate and rear roll-pan look with scale touches, finish off the design. Includes without the clear bodyshell come window masks and a full decal sheet.

View more images here

July 30, 2016

Pro-Line rolls out new 1/10th scale tyres

Coming from Pro-Line are several new off-road tyres in the form of the Electron Lite 2.2″ rear buggy tyre, the pre-mounted 2.8″ Destroyer truck tyre as well as a range of Interco TLS SX Super Swamper tyres. Starting with the Electron Lite 2.2″, the tyre is similar in tread design to its big brother but has a lower profile carcass shape and smaller, more densely packed pins for improved performance on those pure clay tracks with little to no dust. Furthermore the tyre features connected tyre tread technology that improves traction and wear on even the most abrasive of indoor track conditions. The square centre pins laid out between the connected tread provide consistent forward and side bite. The tyre is available in M4 super soft and MC clay compound.

Continue reading here