Thai company TWT has released this new tool stand. The new V.2 TWT Tool Rack, features holes for up to 13 tools and other pit equipment and also features 1 foam padded pockets for small items. It also features a simple system for measuring shims and screws, easy to use, you no longer need a vernier caliper. Made of high-quality acrylic it measures 180 x 85 x 17 mm. Weighing 153 grams it is available in the three colour options – black/grey, black/blue & black/red.
TWT from Thailand have introduced their new tweak control centre, an acrylic plate and carbon fibre rod that help to eliminate tweak from touring car chassis. The acrylic base plate measures 290x86x18mm and it acts as a sturdy base for the chassis to rest on, while the 15mm diameter carbon fibre rod helps to press down the chassis on its shock towers to get the chassis and topdeck aligned straight while tightening the top deck screws. The rod features milled out windows to make way for the main gears of both mid and rear motor touring cars while the base plate is of a two-sided design with trays for smaller parts on the opposite site. The tool set was developed in cooperation with 2020 IFMAR 1/10th 200mm Nitro Touring Car World Champion, Meen Vejrak and it is available in several colour variants now.
TWT from Thailand have introduced their new 2-in-1 pit lamp and tool stand. The lamp uses an aluminium frame and features a touch dimmer, stepless brightness adjustment and it is powered by 100V to 240V input. It attaches to a trick tool stand that offers holes for up to 27 tools and other pit equipment while also offering two foam-padded pockets for small parts. The lap and tool stand adapt to the TWT setup board and car stand design with the tool stand being made of high-quality acrylic, measuring 290x86x25mm. The lamp and tool stand weigh in at 480g and the system is available in black, blue, red, yellow or green colour.
Coming from TWT is their new 1/8th off-road car stand. It is made from high-quality acrylic material and features a double decker design with the lower part incorporating four parts trays while the upper has four marked holes to take the vehicle’s shock absorbers or differentials during setup and maintenance. Anti-slip padding ensures the car stand, that is available in blue, red, black and gray colour, will not scratch the pit table and lower chassis surface while also making for a secure stand.
TWT have introduced their Ronald Völker signature setup board for 1/10th scale vehicles. At 430x350mm it is bigger than TWT’s standard boards and it features a plain middle section without the usual toe and wheelbase grids but a left-hand compartment for the company’s setup stand as well as right-hand, foam-cladded parts trays for screws, nuts and other small parts. Furthermore the board comes with a scale to make trimming battery tape easy and it also sports graphics for easy washer, bearing and screw size identification. In addition to the board as you can see it here it is also available in other designs and layouts. The introduction of the Ronald Völker edition setup board comes hot on the heels of the German’s signing with TWT. The Yokomo driver inked a 3-year contract with the Thai company to use their range of pit accessories while also helping with product development.
Source: TWT [twt-rce.com]
TWT have introduced their revolutionary Pit Mat Bag, a combined setup board bag and pit mat. Made from synthetic leather material the bag features two setup board pouches of 320x460mm for convenient and secure transportation and storage of the TWT setup board while the unfolded bag, measuring 640x470mm, also makes a good pit mat thanks to the durable and somewhat anti-slipping surface.
TWT have introduced new versions of their acrylic setup boards with updated layouts. Developed in cooperation with their team drivers such as Jilles Groskamp and Meen Vejrak the boards offer different pocket locations for small parts and also TWT’s acrylic car stand, making for a more convenient and ergonomic use. All boards feature a white upper plate with measurement grid and coloured bottom sides with foam-cladded pockets with the blue board being the Groskamp edition, the red one being the Surikarn board and the black one the Meen edition.
View the other team boards here
New from TWT comes an acrylic camber gauge for 1/8th off-road vehicles. Made from blue acrylic material the gauge allows for easy camber adjustment in a range of 1 to 3 degree and additional graphics on the gauge make thickness identification of caster and roll centre shims easy. The gauge is available with grey or black stickers and also in personalised designs.
Source: TWT [twt-rce.com]
