Red RC » Vampire Racing

October 12, 2017

Vampire Racing 2S TX/RX charging adapter XH/5mm

Vampire Racing have introduced their new 2S TX/RX Charging Adapter XH/5mm that allows to charge 2S LiPo transmitter and receiver battery packs through the their balancer port. Designed for the use with standard 5mm charge and balance wires the adapter utilises 5mm tube-type connectors for the power wires, a 2mm tube-type connector for the male balancer plug as well as an XH balancer connector for the battery side. The adapter does away with the need to use additional JR or Futaba style charge wires and balance boards, greatly reducing the amount of wires to carry and cleaning up the pit area. The adapter comes pre-wired, covered in protective shrink wrap and it is available now.

View more images here

January 31, 2017

Vampire Racing 6000mAh 80C LiHV battery pack

Vampire Racing have introduced their new 6000mAh 80C LiHV competition battery pack. Made from high-quality high-voltage Lithium-Polymer cells with a constant 80C rating the standard size 2S battery offers a nominal voltage of 7.6V and it weighs in at 305g. The pack utilises 5mm tube-type connectors, Vampire Racing’s new black design stickers, it is both EFRA and BRCA legal and available from now on.

Source: Vampire Racing [vampire-racing.com]

August 4, 2016

Vampire Racing 5mm to 4mm adapter plugs

Vampire Racing have introduced their new 5mm to 4mm bullet-type connector adapter plugs. They come in handy when running battery packs with the new-style 5mm connectors and standard 4mm connectors alongside as they do away with the need to rewire the speed controller or charger plugs. The reducer bushings feature a high-quality gold plating and they are available as pairs or in a convenient 10-piece package.

View another image here

March 18, 2016

New Vampire Racing all-black balance charging leads

Vampire Racing have expanded their range of all-black 2S LiPo charging leads by two new variants with EH and PQ balancer connectors. The charging harnesses come pre-soldered with stepped 4mm/5mm dual plugs and a 2mm balance connector for the battery side and EH 3-pin or PQ 7-pin balance connector on the charger side. The 2S EH connector is a direct fit with LRP’s Pulsar Touch Competition, Quadra Pro 3 and Element Pro charger while the 6S PQ connector is usable with a wide range of devices such as the Team Orion Advantage Touch series, as well as many SkyRC, Reedy, ProTek, Hitec, and Dynamite chargers. Both the new EH and PQ charging leads are available in a short 400mm and a long 600mm version.

View more images here

January 26, 2016

Vampire Racing 2S all-black charging lead 400mm

Following the Vampire Racing 2S all-black charging lead in 600mm configuration the German brand now also has a shorter 400mm variant available. The charging harness comes pre-soldered with 4mm gold-plated bullet-type connectors and an XH balancer plug for the charger and stepped 4mm/5mm dual plugs and a 2mm balance connector for the battery side, which allows to charge 2S LiPo packs with standard 4mm or new-type 5mm connector tubes without having to use adapters or a second charging lead. Additionally the stepped 4mm/5mm dual plugs are now also available as 2-piece or 10-piece packs to equip existing charge leads in order to make them future ready for the growing range of 5mm tube connector LiPo packs

View the stepped connectors here

November 17, 2015

Vampire Racing 2S all-black charging lead

Available now from Vampire Racing is the 2S all-black charging lead in long configuration. The 60cm charging harness comes pre-soldered with 4mm gold-plated bullet-type connectors and an XH balancer on the charger side and and stepped 4/5mm dual plugs and a 2mm balance connector for the battery side which allows to charge 2S LiPo packs with both industry-standard 4mm connector tubes as well as the newer batteries with 5mm tubes.

Source: Vampire Racing [vampire-racing.com]

August 25, 2015

Vampire Racing LiPo safety bag

Vampire Racing’s new LiPo safety bag is ideal to charge, discharge and store LiPo battery packs in. Made from fire-resistant fabric the bag measures 185x70x60mm which is large enough for at least two or three standard 2S LiPos or one 4S pack. Flashy Vampire Racing graphics make the bag stand out while protecting the pit area and surrounding people in the unlikely event of a LiPo pack going boom during charging, discharging or storing.

Source: Vampire Racing [vampire-racing.com]

May 8, 2015

Vampire Racing charging leads

Vampire Racing have introduced three new charging leads for different applications. First up is the LiPo saddle pack balancer harness made for all saddle packs with 4mm connector tubes. The conveniently sized harness comes factory-assembled with an industry-standard T-plug connector, XH balancer port and gold-plated 4mm bullet-type connectors. Also new is an universal charging lead with a Futaba/universal-compatible connector. The lead can be used both for receiver and transmitter battery packs, it comes pre-wired with 4mm gold-plated bullet-type connectors and an additional JST/BEC adapter cable. Last but not least is a dedicated charging lead for glow igniters. Using 4mm bullet-type connectors and an industry-standard adapter the lead is ideal to charge most pre-assembled glow igniters.

Click here to view the other new products