Red RC » Vaterra

October 1, 2015

Vaterra Twin Hammers DT 1.9 Rock Racer RTR

Horizon Hobby have announced the soon release of the Twin Hammers DT 1.9 Rock Racer RTR vehicle. Based off of the proven Twin Hammers the DT variant will feature an updated bodyshell and a LED light bar for running at night. The rugged 4WD chassis features long travel suspension components like the ones found on full-scale rock racers, it comes with multi-surface beadlock wheels and tyres as well as factory-installed waterproof electronics. Included in the set is also a genuine Spektrum DX2E 2.4GHz radio system, a 2000mAh LiPo battery pack and a suitable wall charger.

View more photos here

August 6, 2015

Vaterra 1972 Ford Bronco Ascender RTR

The latest incarnation of the Vaterra Ascender off-road chassis is the 1972 Ford Bronco. The truck is based on the proven Ascender chassis that features stamped-steel ladder frames, over 45 degree of steering travel and one of the most capable off-road suspensions available. The chassis rides on a 3-link panhard bar front suspension and a 4-link rear suspension. All suspension links are machined from aluminium to handle the most punishing conditions. Oil-filled, threaded shocks soak up the bumps and give a variety of pre-load settings. The steel, C-channel frames form the backbone of the chassis and give four wheelbase lengths from 314mm down to 278mm. The single-speed, metal gear transmission is engineered for steep inclines and rugged, rocky terrain. The battery tray floats over the front axle and is designed to accept 96mm shorty packs. Placing the weight of the battery over the front axle gives the front tyres extra traction when crawling over rocks and tackling steep inclines while the front bumper features moulded tow hooks. An opening on the front bumper leaves plenty of room for a winch cable. Included with the RTR kit comes a 35T brushed motor, a waterproof ESC, Spektrum metal gear steering servo and 2.4GHz radio system.

Source: Horizon Hobby [horizonhobby.co.uk]

June 25, 2015

Vaterra Ford F-100 Pickup RTR kit

Horizon Hobby have introduced the new Vaterra Ford F-100 Pickup RTR kit. Based on the proved V100-S 4WD chassis with shaft drivetrain, sealed gear differentials and fixed suspension components the scale and fully licensed Volk low-profile wheels and the 1968 Ford F-100 body is what makes this kit stand out. Included are also waterproof electronics and a 15T brushed motor as well as a 7.2V 1800mAh NiMH battery, a wall charger and a 2.4GHz radio system.

Click here to view the features and more photos

May 16, 2015

JConcepts Hustle 1.9″ trail & scale wheel

JConcepts Hustle 1.9" trail & scale wheel

Made for trail and scale vehicles such as the Vaterra Ascender are the new Hustle 1.9″ rims from JConcepts. The black 6-spoke wheels feature a silver face section for scale looks and each pair of wheels includes a solid and open centre cap which brings even more detail to the wheel. Depending on the desired look or axle length of the vehicle, drivers can choose whichever is best for their individual needs. The caps are attached with the included six, 2x6mm socket head cap screws. In-between the 6 spoke design rest small grooves which break up the pattern adding a split personality to the overall design. The entire face of the wheel has been plated with a silver coating which gives scalers a little more luxurious look to match-up to the variety of full scale inspired bodies on the market.

Source: JConcepts [jconcepts.net]

May 6, 2015

JConcepts Ford Atlas scale bodyshell

Made for the Vaterra Ascender as well as Axial 1.9″ trucks is the new JConcepts Ford Atlas trail bodyshell. The look of the Atlas is unmistakable contemporary Built Ford Tough, with bulging wheel arches, a drop-down beltline at the front doors, and some of the biggest snarling grille nostrils ever seen on an F-150. The Atlas body is specifically built for the Vaterra and Axial 12-12.3″ wheelbase chassis, providing even more versatility to the platforms. Fitting bumper to bumper, the body has all the possible detail of its full-scale counterpart starting behind that oversized grille. Split headlight design with corner reveal turn signal points the Atlas in the right direction while edgy hood detail bulks around the wide-body fenders to provide plenty of clearance for an assortment of large 1.9″ tires. The extra cab look is defined by the recessed windows and the roof has a unique center channel and extruded touches emulating the roof-carrying system shown on the prototype Atlas vehicle.

Click here to continue reading

January 28, 2015

Vaterra Twin Hammers 1.9 rock racer RTR

Coming from Vaterra is the slightly updated Twin Hammers 1.9 1/10th scale 4WD rock racer RTR kit. The vehicle sports a somewhat scale chassis layout with independent front suspension and a solid rear axle to tackle both high-speed tracks and rock crawling trails. A 2-speed transmission allows to shift on the fly while waterproof electronics make for go everywhere capability. Included with the upgraded kit comes a Spektrum DX4E 2.4GHz computer transmitter with Active Vehicle Control technology that assists with driving in critical situations as well as blue and silver body panels to make the truck stand out.

Click here to view the features and more photos

October 30, 2014

Vaterra 1986 Chevy K-5 Blazer Ascender RTR

Vaterra’s lifted 1986 Chevrolet K-5 Blazer Ascender kit is soon also available as an RTR variant including a Dynamite brushed crawler motor, waterproof speed controller and Spektrum DX2E transmitter. The vehicle is based on the Ascender chassis that features stamped steel ladder frames, metal gear transmission, an adjustable wheelbase and a long-travel suspension. The package is topped-off by a replica Blazer bodyshell and grippy scale tyres.

Click here to view more photos

August 21, 2014

Vaterra 2015 Ford Mustang coupe

New from Vaterra, the 1/10-scale 2015 Ford Mustang coupe is a one-of-a-kind RC recreation of this landmark automobile. It comes completely assembled and ready to run with the officially licensed body in place. Beneath the exterior is the power and poise of a Vaterra V100-S chassis. Its potent Dynamite power system and shaft-driven 4WD provide a perfect blend of speed, traction and control that make this car a blast to drive right out of the box.

View more images & details here