Coming from Vision Racing and made for a range of 1/10th buggies is a carbon fibre wing brace. Cut from 2mm carbon fibre and usable with the TLR 22 platforms, the 22-4, Team Associated B5, B44 and B4, the brace will add rigidity to the wing mounting area as well as a little bling.
New from Vision Racing comes the micro tune shock tower for Kyosho’s RB6 2WD off-road buggy. Machined from high-quality carbon fibre the shock tower incorporates in-between holes for the upper shock mounts, making it a total of five per side, while the tower can also be raised by 2mm thanks to a second mounting position for an even wider range of setups. On top of that a redesigned centre section makes for improved airflow towards the body.
New from Vision Racing and made for the TLR 22-4 is a 5mm carbon fibre front shock tower. It incorporates micro tune shock positioning by adding two in between holes to the three stock positions. The smaller centre section allows more undisturbed air to the body and for all the weight conscious stock racers out there the part is 1.4 grams lighter than the stock tower.
Source: Vision Racing [vision-racing.net]
Vision Racing introduce this 5mm carbon fibre shock tower for the 22 2.0 or 22. It incorporates micro tune shock positioning by adding two in between holes to the three stock positions. The smaller centre section also allows more undisturbed air to the body while the tower is very light of weight too, being 1.8 grams lighter then the stock tower.
Source: Vision Racing [vision-racing.net]
Vision Racing have new carbon fibre battery braces for the Team Associated B5 line of buggies available. Coming as B5 and B5M specific variant the parts are cut from 2.5mm quasi-isotropic material and made to replace the standard composite parts with stronger items of more visual impact. The braces are direct replacements and available separately.
Click here to view the mid motor battery brace
Vision Racing now have ball-raced drag links for the TLR Ten-SCTE available. Made from 2.5mm quasi-isotropic carbon fibre the two separate length links are used to adjust the Ackermann angle of the front tyres in order to fine tune steering characteristics. All necessary mounting hardware is included and the links can be ordered as a set or separately.
Source: Vision Racing [vision-racing.net]
Vision Racing have new option parts for the Serpent SRX2 buggy and the TLR Ten-SCTE short course truck available. First up is the short carbon fibre battery brace for the Serpent buggy. The part is cut from 2.5mm high quality material and a direct fit. It is ideal when mounting the speed controller in-line with a shorty LiPo battery packs as the shorter length of the brace does away with speedo height clearance problems. Also new are inner shock bushings for the Ten-SCTE truck. Made from teflon material the parts are of a very high precision improving the O-ring seal seat and thus seal life and shock action. The bushings come in sets of four.
Click here to view the other new parts
Vision Racing introduce 2mm carbon fibre chassis stiffeners for the Team Associated SC10 series vehicles. This upgrade is designed to enhanced the performance of the truck’s stock chassis flex by stiffening and adding weight to the lowest point of the chassis but also keeping it centralised for improved handling characteristics. The modification is comparable to adding carbon arms and parts to the Team Associated vehicles allowing it to work much better on high bite tracks and it works well with the new anti-roll bar kit allowing it to carry even more corner speed. Included with the carbon parts come 18 4-40 x 3/16 countersunk screws for installation.
Click here to view the parts installed
