Red RC » Xtreme Racing

April 8, 2021

Xtreme Aerodynamics EP touring carbon fibre side plates

Similar to their 1/10th nitro class version, Xtreme Aerodynamics have introduced their side wing end plates for the 1/10 electric class. Made of glossy carbon fibre the profile allows the optimal flow on the upper side of the wing while cornering thus improving vertical load and making the car more predictable and precise. Designed using the most advanced CFD software it shows that the holes provide a more efficient wing downforce in high speed corners, thus improving stability at the apex and reducing the delay in corner entry.

Source: Xtreme Aerodynamics [xtremeaerodynamics.it]

April 3, 2020

Xtreme Racing Slash 2WD & 4×4 battery tray insert

Coming from Xtreme Racing and made for the Traxxas Slash 2WD and 4×4 short course trucks is a carbon fibre battery tray insert. The assembly replaces the standard battery hold down bar and was designed to go inside the stock battery compartment, allowing the use of larger battery packs. A hook and loop battery strap will hold in most batteries and also included in the kit are button head screws that are put through the bottom of the chassis so that nothings is hanging down, catching items while running. Installation of the set needs some drilling and modificaions on the existing chassis.

View another image here

December 16, 2019

Xtreme Racing T4’20 carbon lower bumper brace

Coming from Xtreme Racing and made for the Xray T4 2020 touring car is a carbon fibre lower bumper brace. Machined from 2mm carbon material the brace is designed to contact the front bulkhead to help prevent the chassis from breaking during impacts. The part is designed to work under the stock or optional bumper mount.

View another image here

December 12, 2019

Xtreme Racing T4’20 carbon fibre motor spacer set

Xtreme Racing have introduced their new carbon fibre motor spacer set for the Xray T4 2020 touring car. When running a motor without or just a small chamfer, the motor can may hit the top plate when running a smaller spur gear. The set includes a 1.2mm and a 2.0mm thickness spacer that locates the motor further away from the motor mount and top plate, allowing top use a wider range of gear ratios with specific motors. The spacers are designed to be held into the motor so they are easier to install but can be removed if needed. The set also includes miscellaneous fasteners.

View another image here

December 11, 2019

Xtreme Racing T4’20 carbon fibre front bumper holder

Xtreme Racing have introduced their new carbon fibre front bumper holder with brace for the Xray T4’20 touring car. Machined from high-quality 2.0mm carbon fibre, the upper bumper plate was designed to contact the front bulkhead to prevent the chassis from breaking during impacts. The bumper holder was designed to use the stock body mounts and does not work with the offset body posts.

Source: Xtreme Racing [xtremercracing.com]

December 10, 2019

Xtreme Racing Rustler & Slash drag chassis kit

Xtreme Racing have introduced their new drag racing chassis that allows to convert the Traxxas Rustler and Slash 2WD trucks in to a 2-cell no-prep drag racing car. Designed off Xtreme Racing’s LCG Slash chassis the narrowed down drag racing variant reduces the overall weight while extending the wheelbase compared to the standard Rustler specifications. The set includes the carbon fibre main chassis, top deck and ESC mount, battery straps, battery strap holders, small and large standoffs as well as steering post and servo mounts. Not included are the donor truck parts, low-profile shock towers and low-profile shocks visible in the full car image you can find after the break.

View an image of a converted truck here

November 21, 2019

Xtreme Racing Mojave carbon fibre shock towers

Coming from Xtreme Racing and made for the Arrma Mojave truck are front and rear carbon fibre shock towers. Machined from high-quality 5mm carbon material the towers replace the standard aluminium shock stays and they feature additional shock mounting holes for extra adjustability. The shock stays are available separately for the front and the rear of the vehicle.

View the rear shock tower here

October 24, 2019

Xtreme Racing introduce more Arrma carbon optionals

Coming from Xtreme Racing are some more carbon fibre optionals for the popular Arrma Limitless and and Infraction high-speed on-road bashing vehicles. First up are Limitless specific carbon fibre wing mount and wing end plates. The wing mount plates are machined from 2.5mm carbon material and they were designed to replace the standard plastic wing mount. Using the parts will provide a stronger support over the stock parts, resulting in improved downforce. The set includes two wing mount plates.

Continue reading here