Red RC » Accessories

June 4, 2013

Avid B44.2 aluminium centre cap

Avid B44.2 aluminium center cap

Avid’s new B44.2 aluminium centre cap is a fresh take on the design which keeps your chassis secure and makes the car easier to work on. The design eliminates 4 screws for the original cap and instead directly links the front and rear upper decks with taper mounts that key into the upper decks. The added benefit of this design is that maintenance is simplified, when you only remove 4 screws and the entire upper deck assembly is loose for easy slipper clutch removal.

View more images of the centre cap here

June 3, 2013

JConcepts TLR22 & 22T / 22SCT front shock towers

JConcepts have released new 4mm carbon fibre front shock towers for the TLR 22 and 22T / 22SCT. The design team has pin-pointed the exact geometry locations of the front shock tower and designed a durable and lightweight option part that is a direct bolt-on for the front-end of the popular TLR vehicles. The shock tower is 4mm in thickness and features all the stock mounting geometry in a more compact package. Reinforcement ribs have been added where needed for additional strength and mounting hardware has been included for a secure hassle free attachment. Additionally, the replacement front truck tower includes a 2.5mm locknut for body mount attachment.

View the 22 buggy shock tower here

June 3, 2013

Capricorn TE01 optional motor mount & spur holder

Capricorn have released this new optional motor mount & spur holder for their TE01 TC chassis. Changeable with the standard version, it will help increase the traction with more flexibility between the chassis and upper deck. The flexibility can be managed by mounting the connecting support or by using screws in the spur gear mount and connecting support, giving you 3 steps available of varying flex.

View another image of the mount & holder here

June 3, 2013

T.O.P. Photon hanging servo mount

New from T.O.P. is this alloy one-piece hanging servo mount for their Photon EX chassis. This new unit helps eliminate uneven chassis flex characteristics while at the same time limiting any servo position displacement and or rotation that may result from multi-piece hanging servo mounting systems.

Source: T.O.P. [top-racing.jp]

June 1, 2013

Avid aluminum ballstud washer set

Avid have have released their take on a traditional aluminium ballstud washer by introducing a staggered outer diameter so you can easily tell what thickness of washer you are running. As the washers grow in thickness, the outside diameter grows in steps of 0.5mm. Replace the plastic washers that come in your kit with these precision machined aluminum washers which won’t crush and change thickness when clamped. A set includes 12 pcs, 4 of each thickness 2.0, 1.0, and 0.5mm.

View the washer stagger here

May 31, 2013

Exotek DEX410 rear hubs & gearbox holders

Exotek have produced a number of new option parts for the Durango DEX410 buggy. First up are heavy duty 7075 alloy rear hubs with vertical ball stud mounting. Durable but machined to be lightweight, the vertical ball stud mounting allows for easy roll center adjustments by adding shims. The included 2mm spacers are designed to match the stock geometry of the plastic hubs for easy set up reference. These hubs have the stock 0 degree geometry. Next up is a heavy duty rear gearbox holder with a new design which has slotted screw openings for easier installation or removal compared to the difficult stock unit. Simply leave the 2 holding screws half way screwed into the bulkheads and then slide the holder on or off and then tighten the screws. Finally there is a heavy duty front gearbox holder with both gearbox holders are made from 7075 alloy for greater durability.

View the other new parts here

May 30, 2013

Avid RC TLR22 Triad aluminium topshaft

Avid RC’s new Triad aluminium topshaft is an upgrade for the TLR 22, 22T and 22 SCT to eliminate the special ‘mini’ kit slipper nut and use a standard 5.5 mm hex driver to set the slipper clutch. Born partly for necessity, partly for convenience, racers will appreciate this upgrade as they can go back to using a standard slipper nut. Many Triad customers had issues with TLR topshafts which fluctuated in length and did not allow for proper spring tension on the slipper clutch, this shaft aims to solve that.

Source: Avid RC [avidrc.com]

May 30, 2013

Capricorn big bore shocks & springs

Capricorn have released this new 11mm big bore shock absorber set. Featuring a new treatment on the steel shock rod, there is a range of pistons available with 1 to 6 holes (1.2mm each). Designed for the Lab C02, they also fit the Xray NT1 2013 version with a length from uniball to uniball of 50mm. For the new shocks, Capricorn also have a new line of big bore springs. Made with wire from 1.5mm to 1.8mm diameter and from 5 to 6.5 turns, there are a total of 8 different springs available.

View the big bore springs here