Red RC » Accessories

July 11, 2012

Associated 16° caster blocks and spindles

Precision machined from 7075 aluminium, these 16° caster blocks and spindles have been tested and developed by Team Associated’s top pilots to provide a more forgiving steering feel and improved suspension characteristics. Used to secure wins at countless events, including the Silver State Nitro Challenge, Alabama Manufacturers Shootout and French Nationals, the Vertical Caster Blocks and Spindle assembly further optimizes the geometry for all RC8 vehicle platforms. Features include integrated steering stops, lowered roll center, allows lubrication of bearings while assembled and hat bushings and pins are now secured with set screws. They fit all early and later models of the RC8, RC8T, and SC8, nitro and electric.

Source: Associated [teamassociated.com]

July 11, 2012

Smokem Racing 417FX chassis plate

The Smokem FX chassis is now available for the TRF417 and TRF417X. The new 417FX features a unique carbon weave that is integral to its innovative design. The design and carbon specification was meticulously engineered, tested and refined over many months with the help of a well known TRF driver. The 2.2mm thick chassis has an overall width of only 88mm to minimize scrubbing during hard cornering. By incorporating many symmetrical elements throughout its design, the 417FX is perfectly balanced in its flex characteristics. This delivers consistent handling from corner to corner, lap after lap. And by complementing this distinctive design with a unique, high performance carbon weave, the 417FX delivers unparalleled steering response while maximizing rear traction.

View another image of the chassis plate here

July 11, 2012

Serpent 747 chassis, wishbones & ARBs

Serpent have released more new optional parts for their 747 1/10th 200mm chassis. First up is a CNC machined 3mm aerospace quality 7075 T6 aluminium chassis plate featuring a symmetrical design to create equal torsion. Other features include chamfered edges, countersunk holes and cooling holes for the engine plus it is hard anodised for extra stiffness. Also new are these hard rear lower arms which can be used in place of the medium hardness kit versions to help improve performance under high grip conditions and high temperatures. Finally Serpent now offers 5 rear anti-roll bars for the 747 to fine-tuning your set-up. Made from top-quaity spring-steel, they are black-coated and have a line indicator for thickness. Available in 1.8mm to 2.2mm thicknesses.

View the other products here

July 10, 2012

Kyosho Inferno & Plazma tuning options

Kyosho have released this gun metallic anodized radio tray connector plate made of high quality aluminium for the Inferno MP9 TKI3. This option part is not only adding some bling to the car, it is also a useful setup tool allowing you to adjust the flex of the car in this area to your likening. Also from the Japanese company for their Plazma Ra 1/12 scale pan car are these center shock springs. Available in the hardness of soft, medium and hard they are a must have to setup the car at the race track.

View the springs here

July 10, 2012

Xray NT1 pre-assembled brake pad set

For the NT1, Xray have released this factory pre-assembled brake pad set for consistent and precise braking. High-precision, ultra-efficient steel brake pads are CNC-machined and precision ground on both sides for an ultra-smooth surface finish to guarantee maximum braking efficiency. The brake pad backing plates are heat-treated for maximum lifespan. Special high-grip brake pad material is specially bonded to backing plates for high resistance to generated heat build-up. Sold as a set of 2.

Source: Xray [teamxray.com]

July 10, 2012

Arrowmax 64 pitch pinions

Arrowmax have released a full set of premium-quality pinions in 64 pitch. Made from the highest quality 7075-T6 aluminium and hard coated they are both tough and lightweight. Available in a full range from 17T – 52T.

Source: Arrowmax [arrowmax-rc.com]

July 10, 2012

T.O.P. Photon EX options

Some new parts for the Photon EX from T.O.P. with the release of this optional alloy camber link plate with 1.75mm offset. This new part allows the driver to fine-tune the camber link position and thus camber gain characteristics. Also new is a 7075-T6 aluminium tie rod set, this strong lightweight option would is a must for those weight cautious drivers. The set consists of six 30mm tie rods and a 15mm tie rod.

View the tie rod set here

July 6, 2012

KM H-K1 EvoII two speed steel shaft

KM Racing introduce this two speed steel shaft for the H-K1 EvoII 1/10th on-road chassis. Being of a super lightweight design with a 4mm centre hole the shaft is hardened for increased durability while the low weight of only 12.5g makes for less rotating mass of the drive train.

Source: KM [km-rc.com]