Red RC » Accessories

May 26, 2011

Xray XB808 lower suspension holders

Xray have released this set aluminium front and rear lower suspension holders for the XB808. CNC-machined from premium Swiss 7075 T6 aluminium and hard coated for extra durability and long life. The ultra-strong construction provides very long life and durability in even the most extreme racing conditions. The set includes all parts necessary for a complete suspension holder system upgrade. These new lower suspension holders provide an even greater range of adjustment for the front and rear suspension. Using different combinations of eccentric bushings, fine adjustment of front kick up, rear anti-squat, front toe-out, rear toe-in, front & rear roll center and front & rear track-width can be obtained. New reinforced bushings (included) have 1° and 0.5° eccentricity which allows up to 17 different positions. Super-fine adjustments can be made by increments of 0.5°. Includes heavy-duty suspension pivot pins that have been heat treated for increased strength.

View the rear suspension holders here

May 25, 2011

Xray RX8 lightweight front middle shaft

For serious racers conscious of weight savings, Xray have created this new optional front middle shaft for the RX8. CNC-machined from Hudy Spring Steel, it has been strategically lightened by 55% compared to the standard front middle shaft. The front middle shaft is highly wear resistant at contact points, helping to increase the lifespan of the shaft bearings, while rotating mass is reduced without sacrificing strength or durability.

Source: Xray [teamxray.com]

May 24, 2011

Capricorn LAB-C801 option parts

Capricorn have been busy lately, with more new parts for their LAB-C801 chassis. First up is the new set of lightweight red anodised aluminium wheel nuts, that replace the quick release lever, allowing for a more accurate and true mounting of the wheels. Next up are a pair of rear shock stays, which have the same design as the original carbon version but have been made from treated steel for more strength. A new rear body mount centering assembly, with new carbon plate, features ball bearing for a smoother movement. For tuning purposes there is a new 3.2mm rear wire anti-roll bar, which comes with the mounting collars and ball bearings. And finally for all 1/10th scale cars, Capricorn also have a simple set of nylon rear wing screws & nuts.

View the other products here

May 24, 2011

Xray XII & X10 stiffer suspension parts

Xray have released a set of hard suspension parts for their XII and X10 cars. The new parts which include the front upper suspension arm and both the left and rear steering blocks are now also available in the new harder material which is stiffer and stronger.

Source: Xray [teamxray.com]

May 23, 2011

Xray RX8 rear CVD shaft sets

Xray have produced these CNC-machined rear CVD drive shafts for their RX8 1/8th scale chassis. Made from Hudy spring steel, they have been hand ground for maximum precision, then individually measured and inspected.

Source: Xray [teamxray.com]

May 21, 2011

CSO Xray & Tamiya options

CSO Products have released some new parts for different cars in the Xray range as well as the Tamiya touring chassis. Firstly for the Xray T3 & T2, there is a pair of hard coated steel 52mm swing shafts. These are also available for the Tamiya TRF417 & 416 in 44mm versions. For the RX8 there is a pair of hard coated steel rear wheel axles, which have been lightened and come with wheel nuts for a secure and more true wheel mounting, but can also be used with the standard quick release levers. Finally for the RX8 are some lightened 6mm and 8mm aluminium collars for the middle and gearbox shafts.

View the other parts here

May 20, 2011

Exotek HB shock posts & TLR 22 wheel bolts

Exotek Racing have released 2 new unrelated items, HB TCX QC shock posts and TLR22 front locking wheel bolts. The shock posts precision machined from titanium with a 2mm hex and come with alloy stand offs for reduced flex at the shock towers. The quick change design that is lighter than the stock parts it replaces and a shortened barrel for reduced shock slop allows free movement for proper shock function. Sold in a set of 4. The TLR 22 front locking wheel bolts are again made from machined titanium and feature angled wheel locking serrations to securely tighten down your buggies front wheels. They use a 2mm hex wrench and are sold in pair.

View the TLR22 bolts here

May 19, 2011

Capricorn LAB C801 & C01 options

Capricorn have released a whole bunch of new options for their LAB C801 and C01 chassis’. First up is rear flex system for the C801 which allows the rear of the car’s radio plate to flex separately from the radio plate mounting bracket giving more overall grip. This can be used with the optional full flex radio plate to give more steering and which was used by Dario Balestri to take 3rd place at last month’s World Championships. Also for the C801, something taken from the C01, is the new front anti-roll bar system that allows you to use a wire in place of the regular blade system. The wire is available in 3 different diameters, 1.3mm, 1.5mm and 1.7mm. For the C01 200mm chassis there is new ultra lightweight spring steel wheel axles that use the traditional nut mounting for the wheel. Also for that car, with some parts fitting the NT1, is a range of plastic parts that have been made in a new white plastic compound for a longer life. The parts include shock caps, ball joints and more.

View the other products here