Red RC » Accessories

February 16, 2017

Exotek 22 3.0 alloy steering set & brass RF weight

Coming from Exotek and made for TLR’s 22 3.0 series vehicles are an aluminium steering set and a RF brass LCG hanger. Starting with the steering set, it is designed to replace the standard parts on the 3.0 buggy with a more sturdy and precise affair. The new design adds four 3x6mm ball bearings and two crush sleeves for longer wearing, smoother and more precise operation. Included are aluminium bellcranks, an alloy steering rack and miscellaneous small parts and the set is usable on the 22 3.0, 22SCT 3.0/2.0 and the 22T 3.0/2.0.

Continue reading here

February 15, 2017

Team Associated RC8B3 HRC arm mounts

Team Associated have introduced the high roll centre HRC suspension mounts for the RC8B3 series of kits. The parts offer increased ground clearance for greater durability, since the pivots sit 1mm higher off the ground. Additionally, they allow the racer to run a higher roll centre for increased stability on faster, high-grip tracks. Both the A and B mount are also narrower for added side clearance and durability. All of these mounts are made of blue anodised high-quality 7075-T6 aluminium, they fit the RC8B3 and RC8B3e and require the updated #81050 arm mount insert set.

View the other HRC arm mounts here

February 15, 2017

Serpent introduce updated 2-speed gearbox housing

Serpent have introduced an updated 2-speed gearbox housing for the 977 and GT8 cars. With thicker walls the housing will not deform anymore, resulting in improved durability and reliability. Machined grooves keep the weight low while also increasing the surface which results in improved cooling over long runs. The housing fits all SL8 XLi gearboxes as they are standard on the Cobra GT8 and 977 Evo2 kits.

Source: Serpent [serpent.com]

February 15, 2017

Team Magic E5-series aluminium gearbox cover

HRC Distribution have introduced a CNC-machined aluminium gearbox cover for Team Magic’s E5 and E5HX monster trucks. Ultra rigid and thus very durable, the cover reinforces the truck’s drivetrain while also adding visual impact. The cover is available in black or titanium anodising and it is a direct fit on all E5-series trucks.

View the black colour variant here

February 15, 2017

T-Works BD8 & BD7 graphite bellcrank stiffener

T-Works have introduced a graphite bellcrank stiffener for the Yokomo BD8 and BD7 touring cars. Machined from carbon fibre and including a machined aluminium post and hardware the set allows to connect the steering bellcrank posts for improved torsional frontend stiffness while also allowing to connect the steering assembly with the upper deck for even more rigidity.

View more images here

February 15, 2017

Avid X12 titanium ball studs & pivot balls

Avid have introduced three kits of titanium ball studs and pivot balls for the Xray X12 1/12th scale pan car kit. Machined from billet 6AI-4V titanium the parts are about 40 percent lighter than the standard steel balls without sacrificing strength and they utilise a 2mm Allen head for easy installation and removal. Available is a full 14-piece conversion kit including ten 4.2×6.5mm ball studs and four 5.8mm pivot balls as well as a 10-piece and 2-piece 4.2×6.5mm ball stud kit.

View the other sets here

February 14, 2017

Associated TC7.1 PSD shock system & CF bumper brace

Team Associated have introduced two new option parts for the TC7.1 touring car in the form of the Factory Team PSD shock system and a carbon fibre bumper brace. Starting with the PSD Position Sensitive Damping shock system, using the parts makes for a progressive damping that is determined by the piston’s position in the shock body. The more the shock is compressed, the more damping, giving the shocks a plusher feel. The secret lies in the tapered slots in the sleeves. As the piston passes through the narrower slot openings, more pack is achieved. Designed for the use on asphalt tracks with the TC7.1’s small shock bodies the set includes a pair of aluminium sleeves and plain shock pistons. Also new is a woven graphite bumper brace for the TC7.1 A direct replacement for the standard composite part, the carbon fibre brace improves overall stability, durability and it makes for improved visual impact.

View more images here

February 14, 2017

RDRP RC8B3 machined Delrin shock parts

Coming from Revolution Design Racing Products are the RC8B3 machined shock parts, a direct replacement for the kit’s rod guides and lower O-ring bushings. Precisely machined from high-quality Delrin the parts improve the O-ring seal fit for optimised sealing, better shock rod guidance and a more efficient shock performance. The set includes four shock rod guides and four lower bushings, enough to equip all four shock absorbers of a car. The set is compatible to all 3rd generation RC8 kits including the RC8B3, RC8B3e, RC8T3 and RC8T3e.

View another image here