Red RC » Accessories

February 3, 2017

Schelle B6 0.5mm carbon bulkhead shims

Schelle Racing Innovations have introduced a set of 0.5mm carbon fibre bulkhead shims for the Team Associated B6 buggy. They allow to shimming the front bulkhead, and thus the inner pivot, lower to the ground to give extra steering in tight turns. US midwest and Australia outdoor racers swear by this setup on a B6D and the set includes two US-made 0.5mm shims that can be stacked up to get up to 1.0mm lower front pins.

Source: Schelle Racing Innovations [schelleracing.com]

February 2, 2017

Xray XB8 universal centre driveshafts

Xray have introduced universal centre driveshafts for the XB8 1/8th scale off-road buggy. Made from tough Hudy spring steel the parts are strategically machined for a low weight without compromising stability and durability. Due to their design the driveshafts free up the drivetrain while also improving traction at the same time. The universals are available separately for the front and rear.

View the rear centre driveshaft here

February 2, 2017

Exotek Flite 2WD topshafts & direct spur mount

Exotek have introduced three new Flite-series topshafts the most popular 2WD buggies as well as a Flite ultra light direct spur mount. Starting with the topshafts, the parts have been drilled and the teeth narrowed for increased acceleration and a cooler running motor. Less than half the weight of the stock topshaft and slipper assembly and lighter still than Exotek’s standard spur mount set, when combined with the special light weight spur mount, the assembly weighs in at 9.5g complete with hardware and 72 spur. The topshaft is available for the Team Associated B6, Kyosho RB6.6 and the TLR 22 3.0.

Continue reading here

February 2, 2017

JConcepts RC8B3-series aluminium option parts

JConcepts have introduced new aluminium option parts for Team Associated’s 3rd generation 1/8th off-road kits such as the RC8B3 and RC8T3. First up is the suspension arm cap and camber shim set. It makes for an easier and quicker way to change chamber and track width shims on the the RC8B3, RC8B3e and RC8T3 vehicles. The shim set features individual slotted shims which lock to one another while the arm caps have been machined to slide on the upper and lower arms. To adjust, partially unthread the pivot-balls and slide shims in or out depending on required adjustment. Each set, available in blue or black colour, includes two caps, two 0.5, 1 and 2 degree shims which will either complete one side or either top or bottom. To complete the entire front suspension, two sets will be required per vehicle.

Continue reading here

February 1, 2017

Arena alloy servo collars & low-friction O-rings

Arena have introduced a range of aluminium servo mount collars and low-friction shock O-rings for Xray vehicles. As for the servo mount collars, the parts are machined from high-quality aluminium and they are used to prevent the servo from moving in its mounts as they interlock with the case’s lugs, effectively preventing the servo from moving during a hard hit. The mounting collars are available in orange, black and blue colour.

Continue reading here

February 1, 2017

Avid B6/B6D Triad aluminium steering axles

Coming from Avid and made for the Team Associated B6-series of buggies are the Triad aluminium steering axles. Machined from 7075-T6 aluminium and coming black anodised and with machined silver details the unique Triad design axles give the car that stealthy look while also allowing to the narrow track width with the included 1mm shims. The axles weigh in at 2.8g per set and each package includes two aluminium axles and two hard-anodised shims.

Source: Avid [avidrc.com]

February 1, 2017

Xray 1/10th off-road 3 dots/1 stripe linear springs

Coming from Xray are the new 3 dots/1 stripe linear springs for the XB4, XB2 and XT2 1/10th scale off-road kits. Individually measured, controlled, inspected and matched the springs will offer maximum precision and in terms of hardness they are softer than the standard 1 dot linear springs. They also come marked for easy identificaton and they are sold as pairs for the front and rear.

View the rear springs here

February 1, 2017

Avid Triad M4 lightweight wheel nuts gold

Coming from Avid are gold-anodised Triad M4 wheel nuts. Being of Avid’s unique Triad 3-corners design they are usable with a standard 7mm wrench and they are anodised with a unique process that makes them reflective to resemble gold plating. Each nut weighs in at 0.3g and a serrated back section allows for secure wheel tightening. The M4 nuts fit all modern 1/10th on-road and off-road vehicles and they come in sets of four.

Source: Avid [avidrc.com]