Red RC » Accessories

October 30, 2016

Vigor RC XB2 carbon fibre chassis & battery brace

Coming from Vigor RC and made for Xray’s XB2 ’16 and ’17 are a carbon fibre chassis and a battery brace. Starting with the chassis, the part is machined from high-quality 2.5mm carbon fibre and it is designed to replace the standard aluminium chassis. The lightweight material saves about 30 percent of weight with the carbon fibre chassis weighing in at about 86g. It fits the carpet and dirt edition kits, allows the use of several battery positions and it includes a protective chassis skin and mounting hardware.

Continue reading here

October 28, 2016

Hobbywing XeRun XR10 Stock Spec – Full details

Following first teaser images and brief information, Hobbywing have now officially revealed the XeRun XR10 Stock Spec brushless speed controller. Housed in a black anodised aluminium case with incorporated heatsink the purpose-designed stock class controller is of smaller dimensions than the popular XR10 Pro 160A controller. With a footprint of 31.5×25.6mm and a weight of 28g without wires the speedo makes it easier to place it in crowded environments. Despite the smaller size the controller boasts with a lot of features such as a high-voltage 7.4V BEC system, an 80A rating and it sports a patent pending dual switch design with the internal electronic switch is backed by an additional one that attaches to the rear part of the case, making for easier handling when the car’s body is already installed or when the internal switch is hard to reach. On the software side of things the XR10 Stock Spec is packed with a special firmware that includes pre-configured stock racing profiles for on-road and off-road, it features adjustable throttle and brake PWM frequency settings and the ESC is adjustable using Hobbywing’s WiFi Express module and a mobile device and also using Hobbywing’s LCD programming box.

View the specifications and more images here

October 27, 2016

Shepherd Velox F1 high rear wing mount

Shepherd have announced the latest option part for the Velox F1 in the form of the high rear wing mount. This new option part is especially developed for low grip conditions and allows for a much higher mounting position of the rear wing compared to the standard part. The result is improved downforce and rear stability. The mount is made from high-quality carbon fibre material and it is available from now on.

View a comparison of the two mounts here

October 27, 2016

RC-Cox T4’17 & Rapide P12 2016 screw sets

RC-Cox T4'17 & Rapide P12 2016 screw sets

RC-Cox have introduced a range of screw kits for the Xray T4’17 and Roche Rapide P12 2016 cars. Available for Xray’s latest electric touring car are a mixed 64-grade titanium and 7075-T6 orange anodised aluminium screw kit as well as an all 7075-T6 kit, an all 64-grade titanium set as well as a gold-plated steel screw kit. Coming for the Rapide P12 2016 are a mixed titanium and alloy fastener kit containing red anodised aluminium screws, a red anodised all-alloy set, an all-titanium set and of course the odd gold-plated steel fasteners.

View some of the other sets here

October 27, 2016

Pro-Line Toyota Tundra TRD true scale bodyshell

‪Pro-Line Toyota Tundra TRD true scale bodyshell‬

Coming from Pro-Line is the Toyota Tundra TRD true scale bodyshell for 1/10th short course trucks. It replicates the real truck and completely transforms the look of any SCT. As usual the body comes made from clear high-quality polycarbonate and it includes window masks and a comprehensive decal sheet. For a proper fit the body requires Pro-Line’s extended body mount kit.‬

View more images here

October 26, 2016

Pro-Line 105mm Ultra reservoir shock absorbers

Made for 1/10th crawlers and scale rigs are Pro-Line’s new Ultra reservoir shocks. They feature a fully functioning reservoir with a realistic divider piston and set screw for adjusting the shock rebound. The aluminium shock cap, shock body, reservoir, bottom caps, spring perch, shock end and steel shock shaft have all been CNC machined to exacting tolerances to achieve the highest quality shock imaginable and have been designed with scale realism in mind. X-Ring seals are used for both the main shaft seal and the divider piston for the smoothest and lowest friction seal possible for these 9mm bore shocks. From the top mounting hole to the bottom mounting hole the Ultra reservoir shocks measure out to be 105mm at full extended length and collapse down to 75mm for a full 30mm of shock travel. Just like Pro-Line’s popular PowerStroke shocks, the Ultra reservoir shocks feature dual rate Springs but these shocks come with an extra collar to adjust exactly where the dual rate springs transitions to single rate, similar to full scale shocks. Smaller hole pistons are also included for added tuning options. The Ultra reservoir shocks come mostly pre-built and do require oil to be installed by the user.

View more images here

October 26, 2016

Pro-Line Trifecta Lite 1/8th buggy rear wing

Pro-Line’s popular Trifecta 1/8th polycarbonate rear wing is soon also available in a Lite variant. The second generation wing was on show at the recent IFMAR 1/8th Gas Buggy Worlds and it is both lighter and stronger thanks to an innovative bent wicker that eliminates the need for heavy add on pieces and hardware. The three cut lines on the back of the wing are actually bend lines that have been designed to allow for easy bending of the Lexan to create a solid 1-piece wicker. This makes the back of the wing super strong while still allowing for wing flex in the event of a crash, which prevents the wing from shattering. Just like the original Trifecta, the Lite features three dimples that hang down on each side of the wing creating the golf ball aerodynamic effect that reduces drag at high speeds without affecting down force. The wing also includes the centre fin that adds more side stability to the car and increases the strength of the wing around the mounting holes. The Trifecta Lite comes pre-cut, so there is just the wicker height to be decided before mounting it to the car.

View another image here

October 26, 2016

Pro-Line 1/8 ElectroShot & 1/10 Positron tyres

Pro-Line have introduced the new ElectroShot 1/8th buggy and Positron 1/10th 2.2″ buggy rear tyres. Starting with the 1/8th scale offering, the ElectroShot made a first public appearance at this year’s IFMAR 1/8th Gas Buggy World Championships in Las Vegas. Coming from the mind of Ty Tessmann and designed to perform just like a HoleShot 2.0 while lasting significantly longer, the ElectroShot is combination of Pro-Line’s Electron and HoleShot tread designs with connected bars in the center where the heaviest tyre wear occurs. Connected bar-type tyres like Pro-Line’s new Positron have become the new standard for 1/10th buggy race tyres but pins are still the king of the 1:8 Off-Road. The ElectroShot begins to bridge that gap and test the waters with a hybrid Bar and Pin tyre. The ElectroShot will become available in a range of compounds including X2, X3, M3 and M4 and it includes blue closed cell inserts.

content