New from Avid come aluminium parts tray in three different sizes. The most unique being the 350x40mm which was designed to be placed at the top or sides of a pit area as a more permanent solution. Also available are a 200x100mm and a 150x75mm tray with the 350x40mm and 200x100mm also include two round cavities that hold the included Doodad containers. The black anodised trays sport laser-etched Avid logos and machined silver edges for improved visual impact.
New from Xray and made for the XB2 2WD buggies are aluminium camber link mounts. Machined from 7075-T6 aluminium and coming black anodised the parts increase stability and durability while making for a more precise and more forgiving handling at the same time. The front camber link mount fits both the carpet and dirt edition XB2 while the rear mount is only suitable for the carpet spec car.
View the rear camber link mount here
Coming soon from Tamiya are three aluminium centre driveshafts for the MF-01X 4WD chassis. The shafts are machined from high-quality aluminium and they come blue anodised and laser-etched for easy identification. They are designed to replace the standard steel shaft and due to the lower rotation mass acceleration and braking are greatly improved. The shafts are available as 173mm shaft for 210mm wheelbase chassis, as 188mm variant for 225mm wheelbase cars and as 203mm shaft for 239mm wheelbase vehicles.
Source: Tamiya [tamiya.com]
Hot on the heels of the AKA Crosslink 2.2 buggy tyre comes a dedicated 1/10th stadium truck variant. Featuring symmetrical open tread pattern the tyre will break-in quickly while providing exceptional forward traction. This allows to use a more aggressive steering setup without the worry of losing on-power control. The Crosslink has been designed for hard packed or blue groove, indoor and outdoor tracks and it is available in clay, ultra soft and super soft compounds as tyres with Red inserts.
Source: AKA [raceaka.com]
Debuted at the 2016 Reedy Race of Champions, Pro-Line now officially introduce their all-new 1/10th buggy front wing and mount. The wing is placed in front of the shock tower and sits as low as possible for the cleanest air flow and lowest possible centre of gravity. Using the wing will keeping the buggy’s front end planted coming out of the corners, without doing the negative things that can come from a high centre of gravity wing while also pretty much retaining the overall look of the vehicle. The Pro-Line front wing sets include two wings in each package and each one has three different wing cut lines to adjust the amount of front downforce to what works best for the car and track conditions. The wing set is available for today’s most popular 2WD buggies inclining the Yokomo YZ-2, the Kyosho RB6, the TLR22 3.0 and the Team Associated B5M and they include tailor-made, digitally manufactured plastic wing mounts as well as mounting hardware.
View the different wing sets here
AKA have introduced the Crosslink 2.2 rear tyre for 1/10th scale buggies. The tyre builds on the success of the 2.2 Chainlink and it features a symmetrical open tread pattern designed to break in quickly and provide a high amount of forward traction. This additional forward traction is perfect for today’s high-powered and allows a more aggressive steering setup without the worry of losing on-power control. The Crosslink has been designed for hard packed or blue groove, indoor and outdoor tracks and it is available in clay, ultra soft and super soft compounds as tyres with Red inserts.
Source: AKA [raceaka.com]
JConcept’s popular Fin titanium turnbuckles are now also available for the Team Associated RC8B3 and RC8B3e. The base of the shafts design is centred on a beefy 5mm square titanium size which gradually tapers down into a thread base design which accepts the rod ends featured in the kit. The focus of the styling surrounds the lengthened adjustment area and the “finned” cuts that rotate about the centre. The JConcepts turnbuckles are produced with left and right hand threads with the left being conveniently marked for easy orientation and also available is a suitable 5mm turnbuckle wrench made from aluminium.
To celebrate their 35th Anniversary Serpent have issued a special merchandise line including a flat-brim cap and a transportation bag. The cap is made from black fabric and it sports embroidered Serpent and 35th Anniversary logos. As the for bag, it measures 400x300x90mm and it is usable for a range of applications including carrying a laptop computer, kits, tyres or accessories. Like the cap the bag is decorated with embroidered Serpent and 35th Anniversary logos and it sports a durable rubber carrying handle.
View the transportation bag here
