Red RC » Accessories

December 21, 2015

Mugen MBX7R universal centre driveshafts

Mugen have introduced new optional front and rear centre universal driveshafts for the MBX7R and MBX7R Eco kits. The universal driveshafts have less friction, which allows the overall drivetrain to be more efficient while reducing heat build-up as well. The pre-assembled parts are also more durable and require less maintenance compared to a CVA-type driveshaft while providing better power transfer both on and off throttle making the buggy easier to drive during longer runs. The 78.5mm front and 110mm rear driveshafts are direct replacements on both the 7R and 7R Eco buggy.

View the rear driveshaft here

December 18, 2015

STRC Izilla Wraith monster truck racing chassis

Following a first teaser ST Racing Concepts have now released more information on their Izilla monster truck racing chassis conversion for the Axial Wraith. The kit uses stock Axial Wraith components and bolts right on in less than 30 minutes, however, this chassis was designed for more than just bashing, it was made with racing performance in mind as well, thanks to a low centre of gravity design with the heavy electronics of battery, ESC and receiver box placed just over the centre transmission. The chassis places the bulk of the weight right in the middle and as low as possible. Unlike other chassis kits the Izilla places the stock Wraith battery tray side by side with the included aluminium electronics plate, with plenty of space for mounting aftermarket ESCs. The battery is also placed on the opposing side of the motor for a better left/right balance while adjustable forward or rear bias weight distribution is possible.

Continue reading here

December 18, 2015

Yuki Model Unreal 45A brushed speed controller

Yuki Model have introduced the Unreal 45A brushed speed controller for 1/10th scale vehicles. The ESC is usable with up to 3S LiPo batteries or 5 to 10 cell NiMH batteries, it can handle up to 340A peak current and its internal BEC system delivers 5.6V of output voltage and a current of 2A. The safety features of the speedo that, measures 47x38x4mm, include a low-voltage and over-temperature cut-off and it comes pre-wired with Tamiya-compatible battery and motor connectors.

Source: Yuki Model [yuki-model.de]

December 18, 2015

X Factory SC5M Infinity chassis kit

Coming from X Factory and made for the Team Associated SC5M short course truck is the Infinity chassis kit. The set is made up of 2.5mm carbon fibre and saves about 70 grams to make for better handling and improved performance especially in 17.5 Stock classes. The carbon fibre chassis also flexes far more than the aluminium tub, with the flex is controllable so drivers can quickly adjust their truck to suit different tracks and lay-outs by tightening or loosening bolts on the side decks and side rails. The chassis will also not tweak as aluminium does, making for more predictable performance run after run. The kit includes the new lower deck, sandwich side rail, several small parts as well as mounting hardware and a manual.

View an image of the converted truck here

December 18, 2015

KO Propo EX-1 Blue Special & Alloy steering wheel

New from KO Propo comes the EX-1 KIY Blue Special and the Aluminum Steering Wheel2. Starting with the transmitter, the Blue Special builds on the standard Ver.3 KIY but it has a range of optional parts installed such as blue grip pads, blue aluminium screws and a blue LCD colour panel. Also new is the Aluminum Steering Wheel2 set in black and gun metal colour. Machined from aluminium the steering wheel is usable with all KO Propo transmitters and it includes a foam pad and a decrease steering angle spacer.

View the other new parts here

December 18, 2015

Team Associated Factory Team 48 pitch pinion gears

Team Associated have introduced a line of lightweight Factory Team 48 pitch pinion gears. Machined from 7075-T6 aluminium and coming with a hard-anodised finish for long wear the pinions feature two set screw holes, laser-etched tooth count and the larger sizes of 30 and up have holes for additional weight reduction. The pinions are available in a range of 17T to 35T sizes.

View more images here

December 17, 2015

Kyosho Fazer aluminium steering knuckle set

Made for the Fazer intermediate-level 1/10th scale on-road car is this aluminium steering knuckle set from Kyosho. Machined from high-quality aluminium the stub axles come anodised in a gun metal colour and laser-etched for easy identification. The parts are made to replace the standard composite knuckles for improved durability and they include a set of hardware such as screws, bushings, pivot balls and shims.

View more images here

December 17, 2015

Spec-R MF-01X aluminium option parts

Coming from Spec-R and made for Tamiya’s MF-01X kit is a range of blue anodised aluminium option parts. First up is a set of front castor blocks that are made to replace the standard plastic parts. The hubs offer improved durability, cool looks and they include a 6-piece set of bushings for the kingpins. Also new are three different length centre driveshafts, again made from aluminium and coming with a blue finish, the laser-etched parts are available in 203mm, 188mm, and 173mm configuration and they are not only light of weight but also spin very true, making for optimised drivetrain efficiency. Last but not least comes a 4-piece set of aluminium gear differential shafts. Again made to scrub weight and reduce rotation mass the parts also look cool until they are hidden inside the differential case.

View the other new products here