Red RC » Accessories

February 25, 2015

STRC Yeti, SCX10 & Wraith aluminium option parts

ST Racing Concepts has new option parts for Axial’s Yeti, Wraith and SCX10 off-road vehicles available in the form of aluminium centre driveshaft splines and a range of orange anodised alloy parts. Starting with the driveshaft splines, they are made for the use with the Yeti and the SCX10 truck and designed to strengthen the drivetrain and to improve power transfer as they eliminate the flex of the stock plastic driveshaft spline. The aluminium material is also more durable and smoother in movement inside the driveshaft halves during suspension articulation. The parts, of which two are needed per vehicle, are available in anodised black, green, silver, gun metal, orange and limited edition red.

Click here to continue reading

February 25, 2015

Pro-Line limited edition Fuel Stick

Pro-Line introduce the “very limited edition” Fuel Stick. Used in Ty Tessmann’s dominating performance at the 2014 IFMAR Buggy Worlds, the Fuel Stick is designed as a no expense spared successor to the original Pro-Line Fuel Gun. Built for ultra-fast refuelling, the nozzle tip is also designed to fill the tank completely. The diffuser screen covering the outlet prevents excess splashing and prevents large bubbles from forming during filling. The vertical trigger orientation makes refuelling a truck or buggy more ergonomic especially when doing so over high pit walls and it is also good for use with 1/8th and 1/10th cars. An easy to read gauge marked in 10cc increments helps to estimate mileage at a glance. Continuing the over-the-top theme, the nozzle and trigger assemblies are made of machined billet aluminium anodised in Pro-Line blue. Each Fuel Stick is stamped with a unique serial number and certificate of authenticity verifying that it was fully made in the USA and hand assembled in Pro-Line’s Southern California headquarters.

Click here to view the features and more photos

February 24, 2015

Vectorworks 22SCT 2.0 carbon fibre front shock tower

Vectorworks announce the release of a carbon fibre front shock tower for the TLR 22SCT 2.0 short course truck. The part weighs in at just 10 grams and it is a direct replacement for the stock shock tower. It features triple shock mount locations that match up to the stock version, and it is made from 4mm thick press cured carbon fibre for maximum carbon density and superior strength. It also has counter bored holes to receive the front bumper mount without any extra pieces.

Source: Vectorworks RC [vectorworksrc.com]

February 24, 2015

JConcepts Ruptures 1.9″ performance scaling tyre

JConcepts Ruptures 1.9" performance scaling tyre

New from JConcepts comes the Ruptures 1.9″ performance scaling tyre in green compound. It is meant to be an extremely tacky yet versatile tyre and the design starts with a layout of individual “large islands” that react to directional and forward loading characteristics like a soft gummy candy. The long horizontal attack bars are connected with solid sidewall detail which braces the sidewall for the high impact situations. The centre “mini islands” help maintain spinning speed and at half height provide some space to sling clean during those dirty trail runs. The entire top level of the tread has built-in cuts and recessing which provide a sharp edge. A sidewall radial rib connected with a dual position arrow help maintain stability and help the driver squeak out of a tough situation. The carcass itself is extremely pliable which conforms to the vast majority of obstacles. Inside the carcass, JConcepts features a connected “Y” loop ribbing design which blends carefully into the sidewall. The bracing supports the lower half of the tire while maintaining the upper flex characteristics. The tyres include a soft open cell foam insert capable of standing up the super soft compound but flexible enough for sharp terrain.

Source: JConcepts [jconcepts.net]

February 24, 2015

Radtec BD7-2015 aluminium chassis

Radtec introduce a 7075 aluminium main chassis plate for the Yokomo BD7-2015 touring car. Made from 2.0mm high-grade aluminium and using the kit’s original chassis shape the chassis offers a higher rigidity than the standard carbon fibre part and precision machining to reduce the overall weight. The left and right outer edges sport 15 degree chamfered edges to reduce chassis scrubbing in high speed corners and the black anodised chassis is a direct replacement for the kit part.

Source: Radtec [radtec-rc.com]

February 24, 2015

T-Pro aluminium wheel nut wrenches

New from T-Pro come two aluminium wheel nut wrenches for the use with 14mm and 17mm wheel nuts. They are of a simple yet ergonomic design for effortless wrenching and separately available aluminium sockets allow to equip the black anodised aluminium handle with both the 14mm and 17mm tip.

Source: T-Pro [tproracing.com]

February 23, 2015

ProTek 2S-6S 4-battery parallel charge board

ProTek’s all-new 2S-6S 4-battery parallel charger board will enable to charge up to four batteries simultaneously, while balancing the individual cells of each pack. The board is encased in an impact-resistant custom-molded plastic shell and is compatible with LiPo, LiIon and LiFe batteries. The DC input and battery port are protected with replaceable fuses, and each cell and balance wire is protected with self-resetting poly fuses. The board uses standard T-style connectors and JST-XH balance connectors for the batteries and it should only be used when the charging batteries are of the same cell count, similar age and similar discharge rates.

Click here to view the features and specifications

February 23, 2015

Spec-R M-05/06 HD gear differential set

New from Spec-R comes a heavy duty gear differential set of the Tamiya M-05 and M-06 kits. Using a lightweight yet sturdy plastic diff housing, nylon gears and longlife differential joints the diff requires less maintenance compared to the kit part while offering improved diff action at the same time. It also will be more consistent during a run even when using higher power motors. The diff comes without the needed fluid and it is only usable with 10x15x4mm bearings.

Click here to view another photo