Red RC » Bodies

November 24, 2015

Schumacher touring car wheel arch cutting jig

Schumacher have released a wheel arch cutting jig for 1/10th touring cars. The jig ensures accurate and repeatable cutting out of wheel arches time after time. Simply set the car to the required ride height and position the body shell to the desired height. Position the jig flush with the outside of the body shell and locate the centre of the axle through the hole in the tool. The end radius is different from side to side to prevent body tucks so the the jig’s orientation is critical. Hold the jig and draw round the inside with a fine marker pen and then carefully cut to the line with a pair of curved scissors. The jig can also measure wing overhang with the handy 10mm step.

View another photo here

November 22, 2015

The Rally Legends Lancia Delta Esso Grifone bodies

Italtrading have introduced two new 1/10th rally bodyshells out of their The Rally Legends line of scale rally cars and bodies. Available soon are the Lancia Delta S4 and Evo2 in the Esso Grifone design. The bodies come made from clear polycarbonate and they include comprehensive decal sheets as well as moulded details such as lightbars, windscreen wipers and more. The bodies fit Italtrading’s own line of The Rally Legend cars as well as many other 1/10th scale touring car chassis.

View more photos here

November 20, 2015

JConcepts 1974 Ford Bronco trial & scale body

JConcepts have introduced the 1974 Ford Bronco trial and scale bodyshell. Starting with the unforgettable chiseled shape, the Bronco lives on with an impressive grill area detailed with included decal sheet while the large hood area and fender line is sharp while the main body line runs across the entire door and rear fender. Large fender flares provide clearance for a variety of 1.9″ tires and protrude just like the real thing. The cab features popular flat panel window treatment on this vehicle along with heavy trim bordering the geometry. Mock gas tank caps rest in place while turn signal and rear taillight decals along with Bronco badges help bring out the realistic look of a classic beast. The Bronco drops on the Ascender 11.75″ wheelbase setting, with standard body mounts extended in rear height. The retro body also accommodates Axial 11.75″ wheelbase trucks but requires the use or adaptation of long rear body mounts.

View more photos here

November 19, 2015

JConcepts B5M S2 body for lay-down transmissions

JConcepts’ recently introduced S2 body for the Team Associated B5M is now also available in a special edition for lay-down transmissions. Featuring the original Silencer 2 styling with an aggressive, progressive cab design and channelled roof section the body also sports built-in gear cover ducts on both sides, distinct vents used to help relieve hot air build-up inside the body for those high-powered runs or hot days at the track. The features accommodate 3 or 4-gear lay-down style transmissions, giving all out versatility. Included with the S2 lay-down body come two 6.5″ Finnisher rear wings, window masks and a decal sheet.

View more photos here

November 10, 2015

JConcepts S2 B5M bodyshell

During the recent IFMAR 1/10th Buggy World Championships JConcepts have introduced the S2 bodyshell for the Team Associated B5M buggy. The new shell rocks some familiar features but rolled together with a low-profile stance. Slammed overall height allows the S2 to whisk through the turns with a low centre of mass while the progressive cab design provides plenty of front-end force for balance and steering. A channelled roof directs the flow through the centre of the body while also increasing the rigidity of cockpit. The dual side-window design that has become famous on the JConcepts bodies remains to bring a traditional feel to the layout. The upper side-pods feature distinct vents used to help relieve hot air build-up inside the body for those high-powered runs or hot days at the track. Carved and detailed side-pods edge the body giving the highly aero unit a stylish look with and tight fit and finish. Cut-lines are included on each side of the body to accommodate 3 or 4 gear transmission layouts giving all out versatility. Included with the body come two 6.5″ Finnisher rear wings, a decal sheet and window masks.

View more images and a video of Jason Ruona introducing the S2 body here

November 10, 2015

Protoform 1:8 Aero Kit with spoiler & stiffeners

New from Protoform comes the 1:8 Aero Kit with spoilers and stiffeners for 1/8th scale on-road bodies such as the R18 and P909. Designed to add as little weight as possible the kit will keep the structural integrity of the body by reinforcing the sides and rear end. The included braces feature stiffening contours moulded directly into lightweight Lexan for uncompromised rigidity. Added weight is minimised, keeping the car’s centre of gravity as low as possible to maximise corner speed, while still keeping the sides of the body from fluttering down the straightaway. Each 1:8 Aero Kit includes a large main stiffener for behind the rear wheels; pre-formed, pre-cut and ready to install. Two small and two medium size stiffeners are included to reinforce the sides of the body with a few simple bends. Included double-sided tape keeps the whole kit in place. Also included is a rear spoiler/gurney strip, vital to keeping the rear of the car planted. The spoiler is die-cut and bent to size with 20mm slots for adjustability in different track conditions.

View more photos here

November 1, 2015

Mon-Tech Silvy 190mm touring car bodyshell

Italian company Mon-Tech has introduced the Silvy 190mm touring car bodyshell. Specially designed for asphalt racing and tested on various tracks in Italy, the body is made from 0.75mm polycarbonate and it comes with window masks and a decal sheet with headlight details and logos.

View more images here

October 30, 2015

JConcepts B5M Warrior bodyshell

Seen for the first time at the recent IFMAR 1/10th Buggy World Championships JConcepts now officially introduce the Warrior bodyshell for the Team Associated B5M buggy. The design is focussed on the unconventional 8-window cab with rollcage details with an unique split front window, protecting the cockpit from the occasional aerial assault of lap traffic. The rear upper pods are pronounced, heavily drafted and blended to the chassis side-guard covers, allowing plenty of electrical clearance inside the shell. The body is an experienced racer too, featuring useable vents positioned throughout providing air-intake or escape packages for the skilled and crafty driver. Fully committed, the Warrior body features cut-lines for either Team Associated 3 or 4 gear transmission layout and the body package contains two 6.5″ Finnisher rear wings with cut lines and pre-dimpled locations for drop-fit mounting on the Team Associated B5M. Masks are included for all forward and side facing window panels and JConcepts decal sheet round out the package.

View more photos here