Coming from Team Titan and made for 200mm touring cars is the VSR bodyshell. Designed with an emphasis on front end grip the body will still offer a stable and balanced feel that can be tweaked using the supplied rear wing that offers two different trim lines to make for easy aerodynamic tuning. The body is available in a regular weight 1.0mm and a lightweight 0.8mm variant and it includes window masks and a decal sheet.
Pro-Line have several new products for a range of 1/10th scale trucks available in the form of bodyshells and tyres. First up is the pre-painted Flo-Tek Fusion body for 1/10th short course trucks. The recently introduced body is a performance-oriented blend of the Flo-Tek and the Evo and it comes pre-cut and pre-painted to get you on the track even faster. Fitting many of today’s popular trucks the body just needs body post holes and off you go.
Protoform have announced their F1-Fifteen bodyshell for 1/10th formula cars. The body is moulded after the 2015 Formula 1 cars and features a sleek, low nose design with side-pod undercuts and an injection moulded black nylon driver’s helmet for an ultra-realistic look. A new add-on airbox scoop and decal sheet, featuring seatbelts, steering wheel detail, car numbers and a variety of helmet visor colours, complete the scale details. The F1-Fifteen fits most modern formula chassis with trimming for front and rear suspension. This body is produced in genuine 0.7mm Lexan and includes decal sheet, driver helmet, hardware and paint-then-peel overspray film.
Following the electric touring car body and wing gauge Arrowmax now also have a dedicated 1/10th nitro TC tool available. With all necessary measurements in one handy gauge there is no reason to fail the next tech inspection. The gauge is made from high-quality polycarbonate and it sports precise and easy to read markings.
Source: Arrowmax [arrowmax-rc.com]
Arrowmax have a new 1/10th touring car body gauge available. Coming machined from polycarbonate and made to check all relevant body and wing dimensions the gauge is a handy tool for all competition racers as it helps to avoid annoying disqualifications due to the car and bod not complying with the regulations.
Source: Arrowmax [arrowmax-rc.com]
Pro-Line have introduced two new bodyshells, the Predator B5M buggy body as well as the pre-cut Flo-Tek Fusion short course truck bodyshell. Starting with the Predator, the design was originally developed for the RC8B3 and has now been scaled down to fit perfectly on Team Associated’s mid motor 1/10th 2WD buggy. The Predator features a sleek and low-profile front cab and a rear section the will fit any transmission configuration including 3-gear and laid down styles. It takes design features from both Phantom and Type-R designs to create a whole new look with balanced performance in any condition. As usual the body comes clear, including window masks and a decal sheet.
JConcepts have introduced their latest 1/10th short course bodyshell, the HF2. Specifically designed for mid-motor SCT trucks, the radical Hi-Flow 2 body has all new elements which take SCT tuning to the next level. With more reliable stability, increased speeds and more cornering ability in the SCT class, the body will effectively lowering the centre of gravity thanks to a low-profile design to further up performance. Air escape details, such as full rear opening capability just behind the cab as well as larger and more open louvers near the tail end of the bed help to fine-tune the body to the driver’s preferences. The wheel wells are an area of focus on the HF2 body with an edgier appeal and pronounced flare to them. The openings allow for more tire clearance throughout suspension travel and also provide a little release of air during high-speed cornering. The rear number plates have been updated to accommodate the lower roof line and also detailed for appearance. As a bonus, the body includes an HF decal sheet for compatibility as well as window mask and customer letter to fill the accessory package.
Protoform have introduced the new Nor’easter late model 1/10th scale dirt oval bodyshell. An evolution of PF’s line of race bodies and using the latest in aerodynamic styling from full-scale late models, the body has been refined to give even more steering and side bite. Extra clearance has been added around the right front fender and the front splitter reconfigured to allow for more body lean while the side skirts have also been enhanced for more rigidity and stability. Made to fit all the popular dirt oval late model pan car chassis, the Nor’easter meets all dirtoval.com national rulebook specs and comes with a pre-cut and pre-drilled spoiler kit complete with end plates and hardware. It is produced in genuine 030″ Lexan and also includes a detailed decal sheet featuring two different sets of headlight and grille options, window masks, and paint-then-peel overspray film.
