Red RC » Bodies

January 17, 2014

Pro-Line Mirage SS for RC10 Classic

Having teased this Mirage SS through photo releases over the past week Pro-Line have finally released this Limited Edition body for the Associated RC10 Classic. Over 25 years ago Pro-Line began producing Championship winning accessories for the Original RC10 that serious enthusiasts could not live without. Now, Pro-Line, with permission from Team Associated, has reproduced the legendary Mirage SS for the RC10 Classic. The Mirage SS was the first racing body designed by Cliff Lett of RC Performance Specialties (RCPS) for the RC10. Many of the top Team Associated drivers used the Mirage SS exclusively. Brian Kinwald used the Mirage SS to win the 1993 IFMAR World Championship in Basildon, England. With a super low slung nose section and the iconic side pods and cab, the Mirage SS will make your buggy look good on and off the track. Pro-Line notes that this replica Mirage SS has minor alterations to keep the value of the Original Mirage SS bodies intact.

View more images of the Mirage SS here

January 16, 2014

LMR Avior 2-piece buggy rear wing

LMR introduce the Avior 1/10 2-piece buggy rear wing. The second wing designed by LMR features design cues seen on the company’s Electra wing but now the centre section has been moulded flat so that it can house the 2nd piece of the wing. This small duct wing acts to force air onto the rear gurney when at speed and has proved to make the car feel very controllable at high speeds when sometimes they can feel on the edge. Also the side plates have been formed so they can be much taller, with cut lines to help you choose the perfect amount of side bite for your track. The wing is made from durable 1.5mm lexan material and it is available now.

Source: LMR [l-m-racing.co.uk]

January 2, 2014

Protoform lightweight G6-T oval race body

Protoform lightweight G6-T oval racing body

Protoform have announced that they have released a lightweight version of their G6-T oval racing body. Now available in lightweight .025” lexan to compliment the original and slightly heavier .030” version.

Source: Protoform [racepf.com]

January 2, 2014

Sweep RB6 1/10th Muzzle body

Sweep RB6 1/0th Muzzle body

Sweep Racing have released their new 1/10th Muzzle body for the Kyosho RB6 in rear and mid motor configurations. The shell features a rear vertical fin to keep it stable around corners, while the aggressive front windshield provides great cornering. Supplied with a window mask, decal and a 2 wing set.

View more images here

December 20, 2013

Pro-Line Flo-Tek Ford F-150 pre-cut bodyshell

The Flo-Tek Ford F-150 Raptor SVT is the third in Pro-Line’s line of pre-cut competition short course bodyshells. All of the wheel wells have been factory cut out, including the difficult front and rear air vents. The body fits the Pro-2 SC, Slash and Slash 4×4, SC10, Ultima SC and Blitz and comes clear, including side dams, number plates, window masks and decal sheet.

Source: Pro-Line [prolineracing.com]

December 18, 2013

Bittydesign MC10 190mm touring car bodyshell

Following the Nardò, Bittydesign now introduce another new touring car bodyshell in the form of the MC10. It features a unique muscle car inspired front and hood section while the remainder of the body is up-do-date with the latest in touring car design. The silhouette makes for a very neutral and forgiving handling with exceptional stability at the corner apex and combing out of turns. The MC10 is made from 0.75mm polycarbonate, it comes clear, including window masks, decal sheet, large wing mounting washers and steel hardware.

Click here to view more photos

December 17, 2013

JConcepts Silencer Mugen MBX-7 Eco

JConcepts Silencer Mugen MBX-7 Eco-1

New from JConcepts comes the silencer body shell for the Mugen MBX-7 Eco buggy. Designed for the use on high-speed tracks it features a narrowed, Finnisher stance cockpit that allows for smoother high-speed transition and increased flow in and out of the body for electrical air-flow. A deep recess behind the cab features dual channeling out the rear providing air escape along with rear-end stability. The side-pods have a clipped rear-end, narrowing the rear by angling just in front of the rear tyres. The extended runner features on the rear-end of the body enhance the force placed on the rear pods during high-speed acceleration. The main pods are heavily chamfered with a more heat-shrink design over the speed control and motor areas. The end result has the body looking extremely low-profile with heavy JConcepts edginess and appeal and it is capped off with a cockpit “shark fin” for more high-speed tracking stability and increased roof stiffness.

Click here to view more photos

December 17, 2013

Hudy Body Fix bodyshell repair glue

Hudy’s Body Fix bodyshell repair glue is a specially formulated adhesive that reinforces polycarbonate bodyshells. Applied to highly stressed areas such as the front lid and bumper, wheel arches and body stay holes it prevents the polycarbonate from becoming cracked and the glue also holds existing splits together extending the lifespan of the body.

Source: Hudy [hudy.net]