Red RC » Bodies

November 22, 2013

Pro-Line Desert Raid & Ford F-100 bodies

Pro-Line have three new off-road body shells available in the form of the SC-compatible Desert Raid as well as two Ford F-100 bodies. Starting with the Desert Raid, it is modelled after the prototype SU vehicles used at endurance rallies such as the Dakar and it fits many of today’s short course trucks such as the Pro-2 SC, the Slash 2WD and 4×4 as well as the SC10. Mounting the body requires the use of extended body mounts and you can even dare to race it as Flo-Tek air escape vents reduce the so called parachute effect often associated with this type of body shell. The body comes clear, includes window masks and a decal sheet.

Click here to continue reading

November 20, 2013

Italian RC Weapon 1/10 formula body shell

New from Italian RC comes the Weapon body shell for 1/10th formula chassis. The design of the shell allows for improved airflow towards the rear wing while the wide nose section is meant to produce a good amount of front end downforce as well. The clear body is made from 0.75mm thick polycarbonate, it comes without a driver’s helmet and fits most of today’s formula chassis.

Click here to view another photo

November 15, 2013

Pro-Line Desert Raid SC body – Sneak Peek

Pro-Line have released a couple of sneaky preview images of their upcoming Desert Raid short course body shell. Modelled after the prototype cars run at the Dakar and other endurance rallies, the body is designed for the use with SC trucks such as Pro-Line’s Pro-2, Traxxas’ Slash 2WD and 4×4 and the Team Associated SC10. The raised rear end needs to use extended body mounts but otherwise the body is a direct fit.

Click here to view more photos

November 14, 2013

JConcepts 8ight-E 3.0 Silencer body shell

JConcepts introduce the Silencer body shell for the TLR 8ight-E 3.0 buggy. Designed especially for the use on high-speed tracks the newly designed body features a narrowed, Finnisher stance cockpit that allows for smoother high-speed transition and increased flow in and out of the body for electrical air-flow. A deep recess behind the cab features dual channeling out the rear providing air escape along with rear-end stability. The Silencer side-pods have a clipped rear-end, narrowing the rear by angling just in front of the rear tires while the extended runner features on the rear-end of the body enhance the force placed on the rear pods during high-speed acceleration. The main pods are heavily chamfered and a more heat-shrink design over motor and speed control area are highlighted features and the body is capped off with a cockpit “shark fin” for more high-speed tracking stability and increased roof stiffness. As usual the body comes clear, includes window masks and a decal sheet.

Click here to view more photos

November 5, 2013

Phat Bodies DESC210 under body

UK company Phat Bodies introduce this under body for the Team Durango DESC210 short course truck. Looking like the latest incarnation of the Batmobile, when mounted the protective cover secures the chassis and electronics from becoming dirty or wet when running the truck on dirt or on sandy astro tracks. Coming clear and made from polycarbonate the cover incorporates all needed cut lines and fits both the mid and rear motor variant of the DESC210.

Click here to view more photos

November 1, 2013

Protoform Cyclone 10.0 oval body

Protoform is introducing another aerodynamic option for Dirt Oval Late Model racing, the Cyclone 10.0. Measuring 10″ wide, the body is a full half an inch wider than its predecessor, making it a good fit for rubber tyre and loose dirt track racing. It can also be an option for Nitro Late Models and 4WD classes as well. The Cyclone 10.0 incorporates all the latest aerodynamic tricks from the full-scale racers, made to fit all popular dirt oval late model chassis. From the offset front fenders and skewed rear ¼ panels to the rooftop vortex generators, the Cyclone is built for speed, downforce and side bite. The Cyclone 10.0 is fully approved by the DirtOval.com National Rulebook and comes with a pre-cut and pre-drilled spoiler kit complete with end plates and hardware. It’s produced in genuine .030″ lexan and also includes a detailed decal sheet, window masks, and paint-then-peel overspray film.

Click here to view more photos

October 31, 2013

JConcepts RC10 Classic Detonator body

With the return of Team Associated’s RC10 Classic JConcepts introduce the Detonator body shell. The spirit of the Detonator lives in the 1980’s, starting with the rear biased, over rear tower, hung cab, large window detail and roll-bar treatment outlining the stout individual pillars. The side-pods are simple, yet effectively cover the aluminium tub chassis and multiple side windows, including the vintage back window, stand out as class leading details. Included in each Detonator package is a 5.5” wing that is designed to sit flat on the geometry of the body and sits down and hugs the back of the body. A full selection of gurney options on the rear of the wing gives racers a selection of heights to trim to, depending on the level of traction. The wing side-dams are finished off with a little inspiration from today with the leading edge angled and already in attack mode. The body comes clear and includes the 5.5″ wing, window masks and decals.

Click here to view more photos

October 24, 2013

JConceots 6.6″ Hi-Tension wing

JConceots 6.6" Hi-Tension wing

JConcepts introduce their new 6.6″ wide Hi-Tension wing specially designed for mid-motor buggies. Mid-motor buggies are all the rage in competitive off-road racing and when compared to rear motor vehicles, have a slightly different rear wing placement. JConcepts has stepped up to offer a replacement Hi-Tension wing for drivers utilising the mid-motor option and released a specific wing for the application. The more aft position of the mid-motor wing allows more tyre clearance than normal. The wing also features redesigned the side-dams to accommodate this position and it comes with a flow-through feature in the form of a small angular plane which can be trimmed for a slot which air can pass during racing conditions. In addition, the actual vertical side-dam now has a profiled shape near the bottom, tightening the section and also increasing the stability of the side-dams. Although specifically designed for mid-motor applications, the new wing works also great on 2WD rear motor vehicles as well as 4WD buggies.

Click here to view another photo