Red RC » Bodies

November 8, 2017

Aerox Cougar KC/KD buggy body shell

UK Aerox distributor Schumacher has introduced a new body shell for the Cougar KC/KD 2WD buggy. The body is designed to improve the aero package of the Cougar KD and particularly KC models. It has a super sleek design, is 13 grams lighter than a standard kit body which greatly reduces the centre of gravity and the chances of traction roll on high grip surfaces. Michal Orlowski used it to great effect at the recent EOS in Poland claiming 4th place from 3rd on the grid and he says: “The new Aerox bodyshell feels great to drive. Car is more agile and rolls round less so it makes you feel more confident. That makes you faster on the track. And it looks awesome too!” The body is supplied in crystal clear polycarbonate with over-spray film, window masks and decal sheet.

View more images here

November 7, 2017

Leadfinger Racing pre-cut Tactic 1/10th buggy rear wing

Leadfinger Racing have introduced their newly redesigned Tactic 1/10th off-road rear wing and stabiliser. The wing has a widened centre section to easily fit many popular platforms, and is specifically designed for a variety of today’s track surfaces; from indoor turf to outdoor clay. The vented design allows the wing to be left uncut for increased rear traction when needed; or can be cut out, allowing passing air to escape for higher traction conditions such as blue groove clay and turf tracks. When reaming multiple holes was the only option, the new performance enhancement of the Tactic wing allows for more precise tuning without the sacrifice of durability. Two pre-cut wings come per package.

Continue reading here

November 4, 2017

Mon-Tech Racer200 & Silvy200 nitro touring car bodies

Italian company Mon-Tech Racing have introduced their new Racer200 and Silvy200 body shells for 1/10th 200mm nitro touring cars. Based off of the respective 190mm electric variants, the 200mm wide bodies offer comparable characteristics to their electric siblings and they are made from high-quality 0.75mm polycarbonate. Included with the bodies come window masks, wing mounting hardware and a decal sheet.

View more images here

November 3, 2017

LFR EB410 A2 Tactic body shell

Leadfinger Racing have introduced their all-new A2 Tactic body shell for the Tekno RC EB410 off-road buggy. A fresh new look for the EB410, the body, that is set for a release in mid-November, offers an aggressive yet sleek cab forward design and a unique vented roof section for better cooling when used with an optional fan mount. The body shell is also made from thicker polycarbonate material for durability, it comes clear and without rear wing.

Source: Leadfinger Racing [leadfingerrc.com]

November 2, 2017

3DRC touring car wing button set

3DRC from Germany have introduced their new 3-D-printed touring car wing button set. Included are aerodynamically-shaped wing buttons, 3 degree wedges and large surface 5.5mm nuts. The whole set weighs in at only 1.5g and it us thus perfect for the use with lightweight body shell. Using the optional angled shims will give the wing a larger attack angle and more downforce, resulting in increased rear end grip especially on low grip tracks. The set is usable with most of today’s competition touring car body shells and needed for completion are two M3x8mm flathead screws.

View more images here

November 1, 2017

Traxxas show 2018 TRX-4 options at SEMA

During this week’s SEMA, the largest aftermarket automotive trade show in the world, taking place in Las Vegas, Traxxas unveils several 2018 product releases such as the 1979 Ford Bronco body kit. The body will be getting the full Traxxas treatment with scale realism including moulded chrome grill, body side trim, and bumpers. It is also equipped with side mirrors and provisions for scale lighting. It can be customised even further with the optional rear spare tyre carrier and chrome push bar.

Continue reading here

November 1, 2017

PR Racing PRS1V3 low-profile body shell

PR Racing have introduced a new low-profile body shell for the PRS1V3 2WD buggy. With its special design the body is about 35 percent lower than the standard lid, which lowers the overall centre of gravity for improved rotation on high-speed tracks while also scrubbing weight thanks to the lightweight polycarbonate material used. With its optimised airflow the body also increases overall stability and it is a direct fit on the S1V3 FM kit.

Source: PR Racing [pr-rc.com]

October 26, 2017

West Coast R/C Works pan car body support V2

Coming from West Coast R/C Works’ Black Carpet Edition range of option parts is the pan car body support V2. The version 2 has the same benefits as the original support and is made out of 1mm high strength polycarbonate. The change improves the rigidity and stability compared to the 3-D-printed version after customers requested a lighter and more durable design. The body support reduces the body scrub on high traction carpet and allows to mount the body lower than without the support. The pan car body support is available in two versions made out of 1mm polycarbonate – a 35-degree variant for low angled nose body such as the AMR and 60-degree version for short nose bodies like the BMR.

View more images here