Red RC » Products

April 18, 2007

HongNor X1CR Shock Towers

HongNor have released some new upgraded shock towers for the X1CR Buggy which are CNC machined from 5mm aircraft grade 7075 T6 aluminium. Both new towers have been hard-coated with special material for wear and durability and the front tower now has multiple half holes at the top and 3 mounting holes at the bottom. The rear towers have half holes at the top and an extra row on the bottom inside which gives more setup options for different track conditions.

Click here to see the front shock tower… content

April 18, 2007

Himoto Racing tool set

Himoto Racing have announced the release of their new range of tools, and tool set, comprising of 17 different tools, including hex drivers, philips head, flat heads, nut spinners and other various items. Featuring read anodised knurled handles, the tools are basically the same as whats currently on the market with the exception of the nut spinnners which look like nice single piece tools with both handle and shaft anodised red. Expect a mid May release.

Source: Buggy Sport [buggy-sport.info]

April 18, 2007

Spektrums new DX3R 3CH Surface Radio

Spektrum DX3R 3CH Surface Radio

Horizon Hobby have announced the release of the new eye catching Spektrum DX3R 3 Channel 2.4GHz transmitter. In addition to unparalleled freedom and interference protection, DSM2 has a faster response time than any other spread spectrum or PPM system. With it, you will be able to hold the â€œlineâ€ around a track with a level of precision and control unlike anything you have experienced before. And because DSM2 uses direct sequence spread spectrum technology, youâ€™ll maintain this superior response rate no matter how â€œnoisyâ€ the 2.4GHz environment gets.

Click here to see the full specs and another pic… content

April 18, 2007

Hudy Adapter for 1/18 Xray M18 Pro

Hudy, the Slovakian sister company to Xray, have released this new CNC-machined alu wheel adapter to mount hex-drive micro wheels, such as those found on the Xray M18 Pro. The wheel adaptor fits onto the Hudy Micro tire truer and thus makes it possible to true down these type of wheels.

Click here to see an image of the adaptor… content

April 18, 2007

Slapmaster Brush Cavity Tool “Two”

Slapmaster Brush Cavity Tool

Slapmaster, a company run by Brian Bodine who has 22 years of on road racing experience, have announced the release of the Brush Cavity Tool “Two”.Â If you like to use a hole in the center of a brush to further tune your motor, this might just be the easiest tool to use on the market. It will work with upright, laydown and Checkpoint brushes, and the tool comes with a 1.5mm and a 1.85mm drill bit to work with, the bits being finger operated so no power tools are required. Simply lay the brush in the slot, hold it down with your thumb, select the bit size, insert it into the hole & twist away for a perfectly centered hole in the end of your brush.

Source: Slapmaster [slapmastertools.com]

April 17, 2007

HPI Racing DSX-1 Truck body

Some time back we showed you the HPI Firestorm gas powered 1/10th scale truck that, amongst other things, comes as standard with a rather nice pre painted bodyshell. For those racers who want their own personalised look, HPI Racing have just released a clear unpainted version of that DSX bodyshell, which not only fits the Firestorm, but is suitable for other trucks such as the HPI Nitro Rush.

Source: HPI [hpi-europe.com]

April 17, 2007

Hot Bodies Cyclone S RTR

Hot Bodies have officially announced the RTR version of the Cyclone S, their sport version of the World Championship winning Cyclone touring car. Factory assembled to exacting specifications, the Cyclone S RTR will feature everything that makes the Cyclone S a great car, such as World Championship-winning racing geometry, reinforced composite chassis and shock towers, front and rear ball differentials, aluminium motor mount and full adjustability of critical race-tuning settings. This car comes with a pre-painted Dodge Stratus shell and all part are upgradeable to the existing Moorespeed World Championship Edition Cyclone options.

Click here to see some more pictures… content

April 17, 2007

Pro-Line Lexan Car Jack car stand

Pro-Line Lexan car stand

More stuff from Pro-Line today, this time its this lexan Car Jack car stand which has all the features you have ever wanted in a car stand. Its lightweight, using super light lexan material, which is also very durable and the use of supplied adhesive-backed foam provides an anti-skid surface on the top and bottom of the stand. Finally, because the stand is supplied as clear lexan, you can custom paint it in any way you wish, just as you would with your car body.

Source: Pro-Line [prolineracing.com]