Red RC » Products

August 14, 2020

X-Partz sensor wire Protecktor Coverz

X-Factory UK have introduced the new X-Partz sensor wire Protecktor Coverz stickers that allow to conveniently cover flat sensor wires in 2WD buggy chassis. With more and more racers preferring to use the latest flat wire sensor leads, the convenient channel in many of today’s off-road buggies because even more use than with previous thicker sensor cables. The only issue is that on most cars this channel runs under the LiPo and each time the driver removes the battery there is a risk of snagging or dislodging the sensor lead, possibly leading to damage. The sensor Protecktor Coverz are made from an adhesive heavy duty vinyl, and stick over the sensor channel once the lead is in place to conceal and protect it as well as looking really trick too. The stickers are available as four-piece sets in a range of designs for the Yokomo YZ2 DTM or CAL, Xray XB2C’20 or XB2D’20, Schumacher Cougar Laydown, and Team Associated Associated B6.1, B6.1D, B6.2 or B6.2D.

Source: X-Factory UK [xfactoryrc.co.uk]

August 14, 2020

Xray XB4’21 1/10th 4WD buggy – Coming soon

Xray have announced the upcoming release of their forthcoming XB4’21 1/10th scale 4WD buggy kit. The latest incarnation of the company’s IFMAR World Championship winning XB4 series is expected to be an all-new platform, however official details are not available until its full release that is expected to happen within the next weeks.

Source: Xray [teamxray.com]

August 14, 2020

T-Works S35 series DLC-coated shock shafts

Coming from T-Works are new DLC-coated shock shafts for the SWorkz S34-4 and S35-3 off-road buggies. Available are S35-4 specific 58.2mm front and 69.2mm rear as well as S35-3 specific 60mm front and 70.4mm rear shafts all of which are made of high-quality steel that received a DLC coating for a slick and rigid surface. The coating is usually used to protect the crankshafts of nitro engines, ensuring a very low wear and long durability of both the shock shafts and shock O-rings.

View the other shock shaft sets here

August 14, 2020

Yeah Racing CC02 aluminium hi-clearance lower links

Yeah Racing have introduced their new aluminium hi-clearance lower links for the Tamiya CC02 trail truck. The links increase suspension efficiency, as opposed to the stock plastic links which might bend and create instability. The specially shaped links also give more clearance whilst tackling difficult terrain. The set includes four links for the front and rear suspension.

View another image here

August 14, 2020

Exotek introduce new DR10 optionals

Coming from Exotek are new option parts for the Team Associated DR10 range of drag racing cars. First up is a set of aluminium rear hubs whose heavy-duty design maintains the suspension geometry setting, race after race. The updated design works as either the left or right hub and it also allows for adjusting the wheelbase as needed using the supplied spacers. The upright ball stud mounting matches the stock roll centre height and the hubs are also usable for the DB10 and B5 series kits.

Continue reading here

August 13, 2020

Hudy Aluminium Ultra-Light pinion gears

Hudy introduce their all new line of hard coated aluminium ultra light pinion gears. These high-strength pinion gears have been made from tough 7075 T6 aluminium and specially hard coated for superior strength, light weight and high durability. Heavily machined for the lowest possible rotating mass while maintaining strength. Created on a special gear machine, all pinions feature ultra-precise tooth shaping and ultra-true running for vibration-free operation. Fine internal threading allows easy installation and each pinion is fine etched with the tooth number for quick & easy identification.

View all the different pinions available here

August 13, 2020

Ruddog Tweezers

New from Ruddog, these tweezers are the ideal tool when building, maintaining or setting up your RC car. They are made of high-quality stainless steel and sport a protective surface coating that not only reduces wear but also adds visual impact with its stealthy black look. The tweezers come in handy when having to deal with all sorts of small parts such as shims, washers, tiny screws or differential internals such as diff balls or gears. To finish off the look, the high-quality tweezers sport the Ruddog logo.

Source: Ruddog [ruddog.eu]

August 13, 2020

Bittydesign Vision D819RS buggy body shell

Continuing to expand their Vision buggy body shell line-up Bittydesign have released a version for the HB Racing D819RS buggy. The lid’s design will offer an easier to drive and more balanced feeling thanks to a mid-advanced cab, side pod and rear side flaps shape that optimises the aerodynamic characteristics. In addition a flap behind the engine area guides the air towards the rear wing for a smoother and more directed airflow around the shock tower and lower wing mount. The pre-cut body is moulded from high-quality 1mm Lexan polycarbonate, it comes with window masks, overspray protective film and a decal sheet.

View more images of the bodyshell here