Red RC » Products

February 13, 2020

Tekno NB48 2.0 aluminium throttle servo horn

Tekno RC have announced the release of a new aluminium throttle servo horn for the NB48 2.0 nitro buggy. The new heavy duty horn eliminates the possibility of the servo horn stripping, coming off, or the brake and throttle going out of adjustment and causing a runaway. The laser-etched servo horn is made from aluminium and inherently much less likely to strip or flex, but it also clamps and grips the servo output shaft tightly to help prevent it from falling off or losing adjustment. In addition, this new servo horn is designed with a slight angle between the brake and throttle lever, which provides a more consistent braking force through the servo’s rotation. The aluminium horn is a direct replacement for the stock composite horn, it uses the same 5x8x2.5mm bearings and brake linkage, it is made for the use on the 2.0 series of nitro vehicles and comes in 23T or 25T specification.

Source: Tekno [teknorc.com]

February 13, 2020

Losi 1/18th Mini-T 2.0 40th Anniversary Limited Edition

Horizon Hobby have introduced the Losi 1/18th scale Mini-T 2.0 RTR Stadium Truck in the 40th Anniversary Limited Edition variant. Reinvented with modern technology and Team Losi Racing engineering, the Losi Mini-T 2.0 1/18th-scale 2WD 40th Anniversary Limited Edition Truck honours the heritage of the original Mini-T with features and options never dreamed of back in the day. With suspension geometry updated and taken from the TLR 22 platform and the inclusion of a 2.4Ghz radio system, everything here takes a step above the Mini’s on the market. The Limited Edition comes with a brushless motor, throwback trim scheme, individually numbered custom etched chassis, and step pin rear tires and ribbed front tires just like the original. RC enthusiasts looking for something small, but with the performance of a 1/10 scale vehicle will find plenty to love in the Mini-T 2.0. It features a mid-motor configuration for better balance, oil filled shocks, aluminium chassis, and a full range of option parts all in a total ready-to-run package.

View a list of the key features and more images here

February 13, 2020

Carisma Scale Adventure 55g brass weight

Carisma Scale Adventure have announced the release of their new 55g brass battery weight for the SCA1E trail truck. Designed as a direct fit for the truck’s battery compartment, the brass plate will add valuable weight over the front axle, improving traction and climbing performance of the rig without having to add wheel weights which can bring with them some negative effects in certain conditions. The weight measures 138x23x2mm and it is stackable, allowing to add multiple pieces if desired.

View another image here

February 13, 2020

Hudy adjustable droop gauge 80mm to 140mm

Coming from Hudy is their new 80mm to 140mm adjustable droop gauge for 1/8th and 1/10th scale off-road kits. Of a high-quality aluminium construction the droop gauge allows to check and adjust suspension down travel in a range of 80mm to 140mm and thanks to an adjustable slider, it is more precise than ever before. Using the tool is pretty straight forward. The gauge will be attached to the upper shock mounting nut and the ruler on the gauge allows to measure the distance to the centre of the lower shock mounting screw, indicating overall shock length and down travel. The tool is machined from high-quality aluminium, it comes black anodised for wear and looks and white laser-engraved markings help with easy recognition of the settings. The gauge is usable with 1/8th off-road buggies as well as 1/10th scale off-road buggies and trucks.

Source: Hudy [hudy.net]

February 13, 2020

7075.it introduce new A800 optionals

7075.it have announced the release of new optional parts for the Awesomatix A800 series of touring cars. First up is a brass shorty battery holder set for the A800MMXA kit. Designed for the use with LCG or standard height packs the kit only fits the Awesomatix C01B-X-MMA mid-motor alloy chassis as well as the 7075.it flex version 7075-AWX-MMW and 7075-AWX-MM main plates and it is usable with the original Awesomatix battery hold downs or 7075.it’s new tape system battery holder. The design of the battery locators allows the chassis to flex freely while moving the weight as close to the chassis plate as possible for an overall lower centre of gravity. In addition the mounting holes are raised by 0.5mm to not disturb chassis flex. The battery holder set is recommended especially for high-bite surfaces like ETS or CRC black carpet.

Continue reading here

February 13, 2020

Kyosho RB7 aluminium battery post set

Coming from Kyosho and made for the Ultima RB7 2WD buggy is a lightweight aluminium battery post set. Machined from high-quality aluminium and coming anodised in a gun metal colour for looks and surface protection, the design of the posts allows to use O-ring hold downs to fasten the battery, which increases chassis flex and thus overall traction available. The battery posts also sport laser-engraved Kyosho logos in white colour and they fit both the RB7 and the RB7SS.

Source: Kyosho [kyoshoamerica.com]

February 13, 2020

Kyosho Fazer Mk2 aluminium HD front & rear hubs

Kyosho have announced the release of new aluminium HD front and rear hubs for the Fazer Mk2 series of cars. CNC-machined from high-quality aluminium and coming red anodised for wear and looks, the front hubs allow for a more precise and linear steering feeling as well as smoother suspension movement all while increasing rigidity. The front hubs’ design also enables the owner to adjust the camber angle. As for the rear hubs, these also improve suspension movement and rigidity while offering two different camber settings. The front and rear sets are available separately and they including mounting hardware.

View the rear hubs here

February 12, 2020

JConcepts 1993 Ford F-250 monster truck body

JConcepts have introduced their new 1993 Ford F-250 monster truck body with fastback and visor for rigid axle monster trucks. During the mid-1990’s the full-scale monster truck racing scene was at its all-time most competitive. Never before had so many factory backed teams competed for the coveted racing championships during that time period. The Ford bodies were always successful, however, never had one style been so dominant. The 1993 Ford F-250 body was the standard and the top of the line in terms of looks, popularity and performance back during this hey-day of monster truck racing. Never has this body style been available for 1/10th scale Monster Truck racing, that is until JConcepts pulled the trigger. For the ninth generation, the body-shell of the 1993 F-Series was given another major upgrade. To further improve its aerodynamics, the forward bodywork was given a slightly lower hood line, rounding the front fenders and grille. The “Blue Oval,” a trademark of all Ford pickups, makes a striking appearance centered in the grille. Stout fender flares are carved ever so carefully into the panels while openings allow for a vast assortment of tires on the market. The F-250 single-cab look is strong and is a careful reminder of a time when passengers sat side-by-side during a typical outing. The body fits a variety of racing RC monster trucks including the Tamiya Clod Buster, it comes clear and includes an authentic decal sheet and easy to use window mask for the detailed hobbyist.

View more images here