Red RC » Products

January 9, 2020

Losi Tenacity TT Pro 4WD SCT Brushless RTR trucks

Losi have introduced their new Tenacity TT Pro 4WD SCT Brushless RTR trucks. The vehicles are based on the high-performance TEN platform featuring a super-tough 4mm plate, 6061-T6 aluminium chassis and the ability to adjust the TT Pro’s suspension and drivetrain for any condition. For added adjustability and tune-ability, adjustable turnbuckles come standard on the TT Pro as do adjustable swaybars, 4mm aluminium shock towers and independent front and rear suspension. The truck also includes a full metric hardware package and aluminium features along a Spektrum Smart 130A brushless ESC and Spektrum Firma 4-Pole 3150KV 550 motor, allowing drivers to hit 80+ km/h with a 3-cell LiPo battery. The ESC is waterproof, completely programmable and comes pre-wired with a high-current IC5 connector. Drivers stay in control with a DX2E Active transmitter and a Spektrum AVC receiver with steering priority, and the truck is topped off with an officially licensed Brenthel or Falken race inspired scale trophy truck bodies along with officially licensed Method Wheels with Falken Wildpeak MT tyres.

View a list of the features and more images here

January 9, 2020

RC-Cox T4’20 carbon fibre bumper brace

PPM RC Racing have introduced the RC-Cox carbon fibre bumper brace for the Xray T4 2020 touring car. Machined from quality carbon fibre the brace sits atop the upper bumper plate and will touch the front bulkhead in the event of a crash, limiting the bumper’s movement and thus preventing the chassis from getting damaged. Included with the brace comes a pair of shims that make the brace float at the correct height.

View another image here

January 9, 2020

Kyosho Inferno MP10 Spec A nitro buggy roller

Coming soon from Kyosho is the Inferno MP10 Spec A 1/8th nitro buggy roller. The pre-assembled kit out of Kyosho’s Spec A range is built by experienced staff and the kits are individually checked by Inferno designer Yuichi Kanai himself. Areas such as shock absorbers and diffs are built to very high standards to guarantee best performances as are details such as ride height and suspension geometry that all come pre-set and race-ready. On top of this the bodyshell is pre-cut, reducing preparation time significantly. Not included are accessories such as engine, electronics and tyres. As for the specifications the Spec A kit comes with the same features as the standard MP10 kit and it will hit the stores soon.

Source: Kyosho [kyosho.com]

January 9, 2020

Rêve D introduce new SPM titanium screw line

Rêve D from Japan have introduced their new line of super precision machine cut SPM titanium screws. The titanium fasteners are cut from high-quality material for a low weight and exceptional stability and durability and they are available in several variants including 2-piece servo screw sets, 2-piece motor mount screw kits, a 2-piece wing mount set, as well as 4-piece M2x5mm cap and M4x8mm set screw kits. The servo mount screws allow for secure servo mounting as the 4.3mm diameter flange fits snuggly into most servo case lugs, ensuring the servo will not move under load. The 7mm long motor mount screws allow to fasten the motor without using additional shims as they offer a 7mm head section for improved reliability of the whole assembly. The wing mount screws offer a 7.8mm head diameter and they are of a low-profile design, making them ideal for touring and drift car body shells. The M2x5mm cap head screws are usable for most clamp-type wheel hexes, adding bling when the tyres are off while reducing unsprung weight. Last but not least come the M4x8mm set screws that are usable as droop screws in many applications, reducing unsprung weight and adding corrosion resistance.

View the other new parts here

January 9, 2020

Trinity 22X-4 & 22 5.0 Elite ceramic bearing sets

Trinity have announced the release of two new Certified red seal ceramic ball bearing sets for the TLR 22X-4 and 22 5.0 Elite buggies. The high-quality bearings come pre-oiled using a lightweight synthetic oil and they don’t need to be cleaned and broken-in like standard greased bearings. However they need the odd drop of oil now and then to maintain their full performance. The sets include all required drivetrain and wheel bearings and they are available from now on.

View the 22 5.0 Elite bearing set here

January 9, 2020

Alpha Plus fuel efficient carburettor

Alpha Plus have introduced their new fuel efficient carburettor for many of their competition engines. Newly developed with extended runtime and even smoother throttle control in mind, the 7.5mm bore carburettor will improve the mileage of engines such as the Dragon III, IV, GT, and GT-R as a direct replacement for the original part. Also new is a specially designed crankcase backplate that will make for a more efficient mixture flow within the engine, further optimising its efficiency and performance. The backplate fits the Dragon III, IV, GT, and GT-R engines.

View the engine backplate here

January 9, 2020

Yeah Racing MST RMX2.0 carbon fibre upgrade set

Yeah Racing have announced the release of their new carbon fibre upgrade set for the MST RMX2.0 drift car. The set replaces all of the original plastic parts with matte finish carbon fibre items that optimise the chassis’ flex characteristics while adding visual impact. Cutouts in specific areas further fine-tune the overall flex which leads to improved grip during cornering. Included in the set are the lower main chassis, the split top deck, front and rear shock towers as well as mounting hardware.

View an image of the converted car here

January 9, 2020

Muchmore Impact Super LCG 7.4V 5800mAh LiPo battery

Muchmore have introduced their all-new Impact Silicon Graphene Super LCG 7.4V 5800mAh LiPo battery pack. Built from highest quality 130C cells the ultra low profile pack offers a high capacity and a super low internal resistance and thus improved power supply for both modified and stock class racing. The pack weighs in at 240g and measures 138.5×46.7×19.5mm with the ultra low profile design greatly lowering the car’s overall centre of gravity for improved corner speeds especially in high bite track conditions. The hardcase pack utilises 5mm bullet-type connectors and it will hit stores very soon.

Source: Muchmore [muchmoreracing.net]