Red RC » Products

November 21, 2019

Kyosho V-One R4 series V2 aluminium clutch bell

Kyosho have introduced their new V2 aluminium clutch bell for the V-One R4 series of 1/10th 200mm nitro on-road kits. Machined from high-quality aluminium and coming with a special hard-coated surface treatment, the small-diameter clutch bell offers a lower weight than the previous #VZW429 clutch bell for improved drivetrain efficiency while adding overall durability at the same time. The clutch bell is usable for kits such as the R4 Evo.2, R4 Evo, R4s II and R4s.

Source: Kyosho [kyosho.com]

November 21, 2019

GForce Assault 7.6V LiHV LCG shorty battery packs

GForce have introduced their new Assault series low centre of gravity 7.6V LiHV shorty batteries. Available as 4600mAh pack, measuring 93×46×24mm and weighing in at 204g, and also as lightweight 3500mAh variant, measuring 93×46×18mm and weighing in at 155g, the two are ideal for demanding off-road and on-road applications alike. Both are built using high-quality 60C/110C cells, they feature protective hardcases and utilise 4mm bullet-type connector tubes.

View the 3500mAh variant here

November 21, 2019

Xtreme Racing Mojave carbon fibre shock towers

Coming from Xtreme Racing and made for the Arrma Mojave truck are front and rear carbon fibre shock towers. Machined from high-quality 5mm carbon material the towers replace the standard aluminium shock stays and they feature additional shock mounting holes for extra adjustability. The shock stays are available separately for the front and the rear of the vehicle.

View the rear shock tower here

November 21, 2019

Yeah Racing digital pit scale

Yeah Racing have introduced their new digital pit scale that allows to measure the weight of differentials as well as tyres and even wheel loads. With a measuring range of 0.1g to 1000g the multi-functional scale is usable for a wide range of applications and it features a backlit display as well as a protective cover while being small enough for easy storage and carrying.

Source: Yeah Racing [yeahracing.com]

November 21, 2019

SMJ Kabuto Spec2 1/8th on-road exhaust set

Coming from SMJ is their new Kabuto Spec2 exhaust set for 1/8th on-road racing. It makes use of an O.S. based T2080 pipe and an MR02 manifold which results in increased torque in the low to mid RPM range. Included in the set comes all needed mounting hardware such as springs and silicone gaskets.

Source: SMJ [smj-rc.com]

November 21, 2019

ONE 5-port .21 GT engine

Capricorn have introduced the new ONE 5-port .21 engine for 1/8th nitro GT cars. The O.S. based engine was slightly modified to further increase its performance with a hand-tuned crankshaft, a different piston and liner combination with updated timing, as well as a new combustion camber insert helping to extract maximum performance from the power plant. The engine is available as tuned version only and it is up for grabs now.

View more images here

November 20, 2019

Avid XB2C & XB2D 2020 bearing kits

Avid have announced the release of their new ball bearing kits for the Xray XB2C and XB2D 2020 2WD buggies. The range includes the Essential bearing kit, the XB2C and XB2C 2020 full bearing kits as well as the Aura Ceramic gearbox, Aura Ceramic hub and Aura Ceramic full bearing sets. The standard bearing kits are further customisable using Avid’s FlexKit software.

Source: Avid [avidrc.com]

November 20, 2019

Schumacher Eclipse 3 1/12th pan car kit

Schumacher have launched their new Eclipse 3 1/12th scale pan car kit. It features a radical new look, full length carbon fibre top deck and chassis, tweak free battery mounting system and tweak-free centre pivot design. Building on the international success of the Eclipse 2 platform, with its European Stock Championship and Modified Vice Championship, the Eclipse 3 takes LMP12 racing another huge leap forward. New features include hard-anodised alloy hub carriers, ceramic-coated kingpins, a new camber strap design, a redesigned bumper mount, longer side links, thread inserts for easier working on the car, and a new centre damping geometry. The quality, ease of assembly and build process have also been improved, to offer excellent durability and rapid lap times. In the hands of Olly Jefferies the prototype Eclipse 3 has won three of the four BRCA Nationals it has competed in this season.

View a list of the features and more images here