Red RC » Products

September 19, 2019

Arrma Outcast 6S BLX 10th Anniversary LE truck

Coming as an exclusive limited edition is Arrma’s Outcast 6S BLX 10th Anniversary ready-to-run 4WD bashing truck. The vehicle builds on the proven Outcast 6S BLX, however it features an exclusive bodyshell print scheme with the exterior surface having both matt and gloss finishes. Also part of the body package are specially produced Limited Edition decals. Exclusive clear anodised aluminium parts are used throughout to give the LE truck a unique look. The truck uses a laser-etched chassis that is only available on the vehicle and it has been styled to match the body graphics. Rounding out the package are dBoots Back-Flip multi-surface tyres as well as the waterproof BLX185 150A brushless controller, the BLX2050 brushless motor, 15kg-cm steering servo as well as a Spektrum STX2 radio system. The truck, that is issued to celebrate Arrma’s 10th anniversary, is limited to 500 pieces world wide and it will hit stores soon.

View more images here

September 19, 2019

Losi 1/10 Tenacity DB Pro 4WD Desert Buggy Brushless RTR

Horizon Hobby have introduced the new Losi 1/10 Tenacity DB Pro 4WD RTR Brushless Desert Buggy. The Tenacity DB Pro builds on the proven TEN platform and includes a full metric hardware package and aluminium features. This desert buggy features all the technological advances drivers demand including the Spektrum Smart 130A brushless ESC and Spektrum Firma 4-Pole 3150KV 550 motor allowing owners to hit 80km/h with a 3-cell LiPo battery. The ESC is waterproof, completely programmable and comes pre-wired with a high-current IC5 connector. Drivers stay in control with a DX2E Active transmitter, a Spektrum AVC receiver with steering priority, and scale-to-size Falken Wildpeak MT tyres and Method wheels. Finally, the Tenacity DB has a scale-inspired Desert Buggy body along with a new wing and off-road buggy inspired wheel design that looks good in the backyard and out in the desert blasting berms. The buggy will become available in Fox Racing or Lucas Oil designs and will hit stores soon.

View a list of the features and more images here

September 19, 2019

Performa Racing pre-glued 1/8th buggy tyres

Performa Racing have announced the release of their new pre-glued tyres for 1/8th nitro and electric buggies. First up is the Khaos tyre that was designed for loose dirt tracks with the racing line being visible, for clay, blue groove or damp tracks. Hundreds of wide rectangular lugs spaced around the carcass provide excellent forward traction and mud-slinging ability to keep the treads clear from dirt build-up.

Continue reading here

September 19, 2019

Radtec aluminium touring car wing screws

Radtec have introduced their new aluminium touring car wing screws that come in two diameters and a range of colours. The fasteners are machined from high-quality 7075 aluminium and they fit most electric touring car body shells with the small diameter screws being ideal for ZooRacing’s Hellcat body shell. The lightweight screws weigh in at 0.5g for the large and 0.35g for the small diameter bolt and they are available as 2-piece sets in black, orange or red 2-tone anodising.

View the other wing screws here

September 19, 2019

O.S. Speed 1/8th & 1/10th Racing Tires

O.S. Speed have introduced their new Racing Tires foam tyre line for 1/8th and 1/10th scale on-road racing. The 1/8th tyres come pre-trued on white rims with 30 shore and 32 shore front as well as 35 shore rear tyres being available. They are usable for most of today’s 1/8th on-road cars. As for the 1/10th touring tyres, the range includes single compound 35 shore and 37 shore front as well as soft and hard dual compound front tyres – the latter offering improved initial steering response. In the rear tyre department, O.S. will offer 35, 37 and 40 shore variants all of which come on black multi-spoke rims.

View the other new tyres here

September 19, 2019

RC-Cox T4 Mid conversion kit motor mount plate

Coming for RC-Cox’s Xray T4 Mid conversion kit is an aluminium motor mount plate. The cross-shaped alloy part connects the centre bulkheads, providing more cornering speed and chassis flex settings. The part is machined from high-quality aluminium and it comes orange anodised to match the remainder of the car’s alloy parts.

View another image here

September 19, 2019

Yeah Racing M07 competition conversion kit

Following a couple of teasers on social media, Yeah Racing have finally fully unveiled their race-orientated competition chassis conversion set for the Tamiya M07 M-chassis kit. The chassis and drivetrain conversion does away with many of the standard plastic parts in favour of high-quality carbon fibre and aluminium items that not only look a lot cooler, the conversion also adds precision, adjustability and performance. It allows to use 210mm, 225mm or 239mm wheelbase settings, adds suspension adjustability and it includes a fluid-filled gear differential that improves traction while allowing to adjust diff action through different oil thickness. Two different front body mounts enable the use to utilise the standard M07 body mounting position or bumper-mounted body posts for greater body choices. Included in the set come upper and lower carbon fibre chassis parts, carbon fibre shock towers, as well as alloy bulkheads, steering assembly, suspension mounts and also ball races, battery mounts and even a set of balance weights.

View more images here

September 19, 2019

T-Works A319 aluminium shock standoffs

Coming from T-Works and made for the Agama A319 1/8th off-road buggy are new lightweight aluminium shock standoffs. Machined from aircraft-grade 7075-T6 material and coming with a hard surface coating for reduced wear, the standoffs are available as a 4-piece pack in standard length and as 2-piece sets in +4mm or +5mm specification with the added length changing the shock angle which can be beneficial when run in the rear of the buggy. Includes in the sets comes suitable mounting hardware.

View the other standoffs here