Red RC » Products

August 29, 2024

SPower-e Electric Switch Pro II Design by KO Propo

SPower, the engine brand of Sworkz, has released new SPower-e Electric Switch Pro II multi-functional electric switch. The one-touch button with an easy to read screen shows the current battery voltage so that you will not any battery issues before a race. And the back button enables you to change to different battery types – Li-Po, Li-ion, or Ni-MH. The Electric Switch Pro II electronic switch is designed and produced by Japan’s famous rc company KO Propo.

View switch powered up here

August 29, 2024

Reedy Sonic 900/900XL 1:8 Competition Motors

Reedy has released an all-new range of Sonic 900 and 900XL Competition motors for 1:8 eBuggy and eTruggy. Several months of development by engineering staff and factory team drivers has resulted in motors that deliver performance that far exceeds what is required at the highest level of competition. The Sonic 900, available in both 1900kV and 2100kV versions, is intended for use in 1:8 eBuggy classes. Each version comes with a unique rotor which is interchangeable between both and sold separately to fine tune power output and delivery for specific track conditions and driver preference. The Sonic 900XL features a longer, higher torque stator for heavier 1:8 eTruggy use. However, the 900 and 900XL are interchangeable between chassis types to create a wide range of performance options suitable for a wide variety of track conditions. The motors feature a precision CNC-machined case with adjustable timing while an integrated heat sink lowers operating temperatures, which results in less fade over the course of a race, longer run times, and increased motor life. Sensored operation results in a smooth and controllable power band while a powerful 4-pole rotor is supported by precision ball bearings for reliability.

Source: Reedy [associatedelectrics.com]

August 29, 2024

JConcepts RC10B7 Carbon Fibre Shock Towers

JConcepts has released front & rear carbon fibre shock tower options for the Team Associated RC10B7 2WD Buggy. The 4mm thickness, genuine Carbon Fibre material is durable, light-weight and features the JConcepts milled sections which help maintain strength while minimising weight. The front tower’s 3 standard shock positions remain for quick and steady adjustments in the correct position for the front shock geometry. The tower is complete with countersunk holes on the top surface to accept the stock mounting hardware. The rear tower has the 4 standard shock positions remain for quick and steady adjustments in the correct position for the standard RC10B7 and RC10B7D settings. The towers feature the JConcepts treatment of a milled logo and is available in 2 different colour combinations – black or blue. The front shock tower accepts the original RC10B7 clip-on front shock tower guard, and updated screw in type guard or configuration for upper front wing mount.

View towers mounted here

August 28, 2024

PNP-RC MRX6X Radio Box 1.5mm Spacer

Another new release from specialist onroad accessories and optional parts producer PNP-RC is this Radio Box 1.5mm Spacer for the Mugen Seiki MRX6X 1:8 Onroad chassis. This carbon piece is mounted in between the carbon radio tray and the plastic radio box lowering the complete radio box 1.5mm resulting in a lowered centre of gravity. The spacer is currently the only one on the market purposely designed to fit perfectly for lowering the radio box on the MRX6X.

View spacer fitted here

August 27, 2024

MIP Exclusives RC10 & RC10T Re-release CVD Kits

Tool manufacturer MIP has unveiled two of the first products launching under their new MIP Exclusives banner with the release of CVD Kits for the Associated RC10 and RC10T Re-Releases. Drawing on the Californian company’s experience with the original vehicles, MIP modernised these CVD shafts to deliver enhanced performance and durability while preserving the classic spirit of these legendary RC cars. Offering superior durability the CVD shafts are made from hardened steel and built to withstand the toughest off-road conditions. The smooth and efficient operation of MIP CVD shafts improves power transfer and handling. The kits are designed for a hassle-free installation, allowing you to get back to racing quickly. Both the RC10 Re-Release and RC10T Re-Release CVD Kits are now available for pre-order at MIPonline.com.

Source: MIP [miponline.com]

August 27, 2024

T-Works B7 adjustable CF Battery Mount

New from T-Works is this adjustable Carbon Fibre Battery Mount for the Team Associated RC10B7 2WD Buggy. A direct replacement for the plastic kit mount, the Carbon version also allows you to easily adapt to various sizes of battery providing a secure fit. Supplied with aluminium spacer you can adjust the height according to different brands of batteries. White lines help with fast and precise installation of the battery when fine tuning the weight bias.

View more images here

August 27, 2024

PNP-RC IF18 Carbon Fibre Rear Bodymount Set

Spanish onroad accessories and optional parts producer PNP-RC has released this Carbon Fibre Rear Bodymount Set intended for the IF18 2|3 1:8 Onroad Chassis from Infinity. The 4mm Carbon fibre rear body mount copies perfectly the body shape adding material in critical areas to increase the durability. A key feature of the mount set is the adjustable body position which you are able to move forward or rearward just playing with the clips (1mm, 1.8mm and 3mm in thickness). This will help a lot to fine tune your car without having different bodies with different positions. With the 1.8mm clip there is no need to modify any part of the car to achieve a free movement of the body mount. Also included are 2x 0.2mm fibre carbon body protectors which fit perfectly with the carbon fibre body mount and must be glued to the body shell. These fibre carbon protectors will be also sold separately.

View Mount Set fitted to car here

August 27, 2024

MIBO Wire Organiser v2

Czech brand MIBO has released a new v2 version of its Wire Organiser. The updated design complementing MIBO Cube Bullet connectors and the securing screws now have the more common 1.5mm hex. The aluminium wire organiser is for 12-14AWG power cables. With an outer dimensions 19×7.5×6 mm, it is a useful tool for securing cables between ESC and motor, or battery and enhancing the look of your chassis.

View more images here