Red RC » Radio Equipment

November 6, 2019

Rêve D RS-ST digital servo & USB programmer

Rêve D have introduced their first products in the form of the RS-ST digital high-torque drift car servo and the RS-PGC USB programming dongle. Starting with the RS-ST servo, it features an IRC motor for super high torque values while offering very smooth operation as it is needed for controllable counter steering angles during competitive drift car driving. An aluminium middle case makes for good heat dissipation while offering a low weight. Due to the servo’s high-torque specification it is 2.5mm taller than usual low-profile types.

Continue reading here

November 6, 2019

Klinik RC wireless transmitter charging system

Klinik RC have introduced their are wireless transmitter charging system for Futaba, KO Propo and Sanwa transmitters. Designed to work with the most common transmitters on the market, Klinik RC have started with a blank slate and spent several months developing the correct charging pad, receiver coil and micro chip processors for safe, reliable and true balance charging. The designers engineered the charging coil to the smallest sizes possible. Measuring less than 1mm thick over most of the surface ensures it will fit very easily inside any battery compartment. The radio can easily stay topped off during any race day simply by placing on the pad between heats. Installation takes only a few minutes on average with no tools required. All that is needed is an available USB charge port, featured on most chargers and power supplies today, and a balance plug when using a 2S LiPo system. The charging system will work with all common transmitter batteries on the market regardless of capacity, all that is required is a battery with a standard JST-XH balance plug.

Continue View a list of the key features and more images here

October 27, 2019

Hitec DB777WP waterproof low-profile servo

Hitec have introduced their new DB777WP waterproof low-profile servo. Designed with a full metal, IP-67 rated waterproof case, the advanced, programmable servo is Hitec’s fastest low-profile option for 1/10th buggy and touring car drivers. The DB777WP is powered by a 32-bit micro controller unit and 12-bit analog to digital converter, bringing high resolution, rapid response, and patented Smart Sense technology.

View lists of the features and specifications here

October 25, 2019

Power HD Storm-S15 reverse receiver wire servo

Power HD have introduced their all-new Storm-S15 reverse receiver wire low-profile HV brushless servo. With the receiver wire leaving the case on the opposite side of the outdrive gear – and thus on the inside of the chassis in most cases – wiring can be carried out much neater compared to standard servos that always have the wire on the “outside” of the chassis. Therefore the servo is the ideal choice especially for 1/10th touring cars, as it not only make for more tidy wiring but also prevents the wire from being exposed in the case of a crash. Other features include a 2-tone case anodising on the aluminium case with silver, golden or red details being available, and high-torque aluminium and steel gears make for exceptional durability.

Source: Power HD [chd.hk]

October 24, 2019

Spektrum DX5 Rugged DSMR transmitter orange

Horizon Hobby have introduced the new Spektrum DX5 Rugged DSMR transmitter in a special orange edition. The 5-channel surface transmitter redefines radio control with a level of durability to match the tough conditions off-roaders, bashers and boaters encounter constantly. The designers started with a chassis based on the Spektrum ergonomic design found on the popular DX5C and competition favourite DX5 Pro. From there, they integrated cordless power tool feature ideas for the die-hard punishment those products endure. The result is an RC system with exceptional durability in addition to other innovative features that unite with a level of precision, versatility and convenience.

Continue reading here

October 24, 2019

BR1 BC-T4WC Xray T4-series steering servo

Coming from Bruno Coelho’s BR1 brand is the new BC-T4WC servo for Xray’s T4 series of touring cars. Following the success of the BC-1863X servo, and to celebrate its Touring Car World Championship title, BR1 have developed the BC-T4WC (0.07s/11.0kg-cm/56g), a servo which is a must have for Xray T4 users that are looking for maximum performance from their car. It features a new all-aluminium case, as well as a receiver wire that now comes out of the back of the servo, allowing for much neater wiring. The integrated mount also has a screw hole to install a battery backstop with the low centre of gravity mount, which was characteristic for the first version of the servo, being once again the most striking feature, as it also perfectly fits the soon to be released Xray T4 2020 car. In addition the servo has also been updated internally to ensure best possible performance for the user.

View more images here

October 11, 2019

ProTek 160TBL Black Label low-profile servo

Amain Hobbies have introduced the new ProTek 160TBL Black Label low-profile high torque brushless servo. Used by Ryan Maifield to win the 2019 ROAR 4WD Off-Road National Championships, the servo rapid fast transit times and exceptional torque, making it ideal for all demanding 1/10th scale racing applications. A high-quality brushless motor ensures lots of holding torque and the aluminium upper case provides bomb proof durability while the heat sink centre case offers efficient heat dissipation and helps to reduce weight. An aluminium, single arm clamping servo horn is included, as well as a full set of servo mounting washers for a rock solid and durable installation.

View a list of the key features here

September 27, 2019

Yokomo SP-03DPC servo programming card

Yokomo have announced the release of a dedicated programming card for their SP-03D drift car servos. The compact programming card allows to adjust several parameters such as the servo’s speed and torque, the torque holding force, the anti-shake hunting suppression value, neutral width and the servo reverse. The device is powered externally by a BEC or USB power source and usable exclusively with the SP-03D servos.

View another image here