Leespeed have introduced the Angel Stick touring car bulkhead alignment tool. The square block makes sure the front and rear bulkheads sit parallel on the chassis, making for less tweak issues and perfect drivetrain efficiency. The block is made from black anodised 7075 aluminium and it is usable with Yokomo, Xray and HPI/HB touring cars.
Coming from Team Associated are the new Factory Team hex and Nut drivers that fuse style with functionality. Assembling or wrenching will be a breeze with the lightweight, colour-coded handles. A wide variety of tips including 1.5mm to 5.0mm hex as well as 5.5mm and 7.0mm nut drivers allow to handle all of the standard metric screw hardware in a kit. The drivers are available separately or as 3-piece and 5-piece sets.
RCbenchmark has announced the release of the production version of its dynamometer for brushless motors. The dynamometer helps designers to optimise motor and gear ratio selection for the perfect balance of torque, power and efficiency for a specific race or frame. The tool measures torque, motor speed, motor efficiency, motor power and motor internal resistance. Motor loading is adjusted by installing different propellers on the inrunner motor with this method of loading the motor was chosen for its smooth and constant load, for the huge load range it provides, as well as for its low cost. The software can export the data to any spreadsheet software, and most tests can be automated with the automatic control feature. The dynamometer was built by designers, for designers, to save time, and to obtain the best performances and it is especially helpful for smaller motors such as used in 1/16th scale vehicles.
Source: RCbenchmark [rcbenchmark.com]
Arrowmax have introduced a set of Honeycomb design chassis droop blocks. They offer Arrowmax’ signature Honeycomb design and are 20mm high, allowing for precise suspension droop adjustment while looking cool at the same time. The lightweight blocks come gun metal anodised to match the remainder of Arrowmax’ Honeycomb tools an they sport laser-etched writings for easy identification.
Source: Arrowmax [arrowmax-rc.com]
Serpent have introduced two new tool for nitro on-road cars in the form of the Centax clutch bell holders and pinion tools for 1/8th and 1/10th cars. The clutch bell holder was designed to easily grip the clutch bell during removal or installation of the pinion gears and the tools are made from hard-anodised aluminium with a spring steel lever and steel pin to secure the clutch bell. The pinion tools are also made from aluminium but they come orange anodised and allow for easy removal or fasting of all new-style pinion gears.
Mibosport have introduced their tire knife tool for rubber on-road tyres. The razor-sharp fork helps to remove the performance-hampering moulding flash on touring car and formula rubber tires, thus doing away with the need to pre-scrub the tire before use in most cases. The knife is made from high-quality stainless steel and it comes etched with the Mibosport logo.
Coming from Tuning Haus and designed on cooperation with Randy Caster are thread-on setup wheels for 1/10th touring cars. Coming in a set of four wheels they help to get critical adjustments like camber and toe-in just right as they keep variances like wheel, insert and tyre diameter out of the equation. Different from other setup wheels the Tuning Haus parts further simplify the process by threading directly onto the axle; eliminating the need for a separate wheel nut. They are perfect for the use with 1/10 touring cars, Formula chassis, drift cars, and others with 4mm threaded axles. Manufactured from billet aluminium and anodised black, they feature durable rubber O-rings and come packed in a convenient storage case.
Source: Tuning Haus [tuninghaus.com]
McPappy Racing have introduced the Helping Hands third hand tool. Designed to hold a wide range of items during soldering, glueing, painting or polishing, the two main components are the three-jointed articulating friction arm and the mini vise. One knob completely releases all three joints including the twist on both ends. Each end has the industry standard 1/4″-20 threads that lets you directly bolt on other things such as a desktop microphone mount, GoPro mount, or web cam holder. The mini vise features two polished tool steel rods, and a custom turnbuckle with left and right-hand threads so it opens and closes twice as fast as a screw. Holes in the jaws for the included steel dowel pins allowing to hold odd shaped items. V-slots were machined into the lower vise jaws to hold straight items like screws and rods in either direction. The hobby vise is made from 7075 aluminium for a light weight, heat sink capabilities and to don’t scratch other metals. The tool comes as a single arm item but an upgrade kit allows to make it into a dual arm version later
