Hiro Seiko have a new luxury aluminium parts tray available. Made from high-quality material and coming in the three colours of silver, red or black the tray measures 120x100x8.5mm and it is ideal to store small parts in during building, maintenance or setup. The surface of the tray sports a brushed appearance and laser-etched logos make it stand out.
Click here to view more photos
Arrowmax have a new addition to their range of Honeycomb tools available in the form of a Centax clutch spring adjustment tool. It allows to easily attach and detach the clutch spring preload collar and it also comes in handy when adjusting the bite point of the clutch. As all Honeycomb series tools the clutch adjustment tool makes use of a lightweight aluminium handle with large milled-out sections and it comes gun metal anodised and laser-etched.
Source: Arrowmax [arrowmax-rc.com]
New from Arrowmax comes a chassis balancing tool. Made from aluminium and coming gun metal anodised and laser etched the tool is made to work with all on-road chassis that offer balancing tool pin holes at the front and rear of the chassis which is a standard at most of today’s touring cars, pan cars and formula kits. Placing the chassis on the 2-piece tool helps to fine-tune the left-right balance of the car using optional weights or on-board weight distribution tools.
Source: Arrowmax [arrowmax-rc.com]
New from Arrowmax and made for 1/8th off-road vehicles is the quick camber gauge. Designed for quick and easy camber angle checks the 1-piece gauge allows to measure angles of 1.0, 2.0 and 3.0 degree by simply placing the gauge alongside the wheel. The tool is made from CNC-machined aluminium and it comes laser-engraved for easy identification while milled-out sections make way for the wheel nuts.
Source: Arrowmax [arrowmax-rc.com]
Following the recently introduced off-road ride height gauge JConcepts now also announce the release of a matching camber gauge. Adapting the overall appearance of the ride height gauge the new instrument is precision machined from high-quality aluminium, it is available in black or blue colour and sports laser-etched measurements from -10 to +10 degrees for a complete range of camber adjustments. The camber gauge comes pre-assembled with 4mm hardware for the pivot and thumbscrew as the setting knob. The structure features chamfered silver edging, highlighting the design. The alignment arm on the gauge is heavily chamfered which creates the perfect touch point against the tire and wheel. Each gauge comes in a latch box with foam insert which fits snugly around the instrument with heavy cushion.
Click here to view another photo
The latest addition to Arrowmax’ Honeycomb tool series is a 17mm wheel nut wrench for the use with 1/8th scale buggies, truggies and GT cars. The nut driver part sports the distinctive honeycomb design and it is hard-anodised for low wear while the aluminium handle comes anodised in a gun metal colour and decorated with the Arrowmax AM logo.
Source: Arrowmax [arrowmax-rc.com]
The new 110% Racing ride height gauge has been designed to be simple and easy to use and it covers heights from 16mm to 30mm in 1mm increments, simply by switching between the five durable moulded plastic plates that are included, which means this ride height gauge is easily adjusted for most off-road vehicles. The aluminium shaft in the middle was designed to be long enough to allow to slide the ride height gauge under the car easily without bumping any other parts, to get a fast and accurate ride height check. The plastic plates included in the package are triangular to get three different ride heights on each plate. When there is a need to switch out plates, it’s easily done with one screw on the end of the shaft.
Click here to view a prototype of the tool in action
New from JConcepts comes an aluminium ride height gauge for a variety of 1/8th and 1/10th scale vehicles. Manufactured from aluminium billet material to high specifications and anodised to a luster the detailed instrument is available in either blue or black anodising and laser etched with graduated measurements from 10-40mm for use on a various of vehicles. The ride height gauge comes pre-assembled with 4mm hardware for the pivot and 3mm setscrew and thumbscrew as the setting knob. The structure features chamfered silver edging, highlighting the design. The touch-off point on the gauge is a rounded boss and always meets the chassis at the proper angle. Each gauge comes in a latch box with foam insert which fits snugly around the instrument with heavy cushion.
Click here to view another photo
