Red RC » Tools

April 20, 2020

T-Works super-fine ride height gauge

T-Works have introduced their new super-fine 1.5mm-6mm ride height gauge. Machined from high-quality aluminium and sporting an anodised black and machined silver edge finish, the flippable ride height gauge allows to measure the ground clearance in 0.1mm increments – by turning it around to use even or uneven settings – making it the ideal tool for 1/12th scale and 1/10th scale electric on-road cars. Laser-engraved white markings help with easy reading of the settings.

View another image here

April 10, 2020

T-Works on-road clutch adjustment tool

Coming from T-Works is their new tool specially designed for effortless adjustment of on-road clutches. The tool uses T-Works’ standard 2-colour aluminium handle with a specially designed 2-pin adapter allowing to adjust all standard 1/8th and 1/10th IC track clutches with ease.

View another image here

April 10, 2020

GForce V2 spring rate gauge

GForce from Japan have introduced their new V2 spring rate gauge that allows for easy and precise spring rate measuring. The updated variant allows to pre-set four stroke settings of 2mm, 5mm, 8mm and 10mm, ensuring usability with both on-road and off-road springs that require different stroke values for measurement. The gauge uses a machined aluminium case, it features a laser-engrave size scale and an easy to read LC display to check the N/cm unit spring rate. The devise is usable with springs of up to 80mm in length and it is available in black or blue colour.

View a list of the key specifications and the colour variant here

April 9, 2020

Infinity IF14-2 bulkhead alignment tool

Creation Model have introduced the new Infinity bulkhead alignment tool for the use with the recently introduced IF14-2 touring car. Machined from aluminium and coming in a 2-tone black and red anodised finish the block allows to straighten the front and rear bulkhead assemblies during building and maintenance. The result of perfectly aligned lower bulkhead halves are a tweak-free chassis assembly as well as a more efficient drivetrain all of which leads to a faster and more predictable ride. The set includes the bulkhead alignment block as well as two steel pins that help to further straighten the assembly. The pins can be attached to the bulkhead block during storage and transportation for more convenience.

View more images here

April 6, 2020

1Army carbon fibre 36mm droop stands

1Army have introduced their new 36mm droop stands for 1/8th off-road vehicles. Machined from carbon fibre for a low weight and high rigidity, the tool is of a foldable design, making travelling much easier. Machined 1Army logos make the droop stands stand out.

View another image here

April 3, 2020

T-Works 12mm & 17mm hex tyre sanding tool

Coming from T-Works is their new tyre sanding tool developed for the use with 12mm and 17mm hex wheels. The bit attaches to standard battery-powered rotary tools and its 2-sided design allows to choose either a 12mm hex portion that accepts standard 1/10th scale wheels or a 17mm hex portion for 1/8th scale rims. The tool allows for easy tyre preparing such as sanding down moulding flashes, true tyre diameters, scrub down tyre threads and more. With its sturdy design it will withstand a lot of abuse with the black surface coating further preventing excessive wear.

View more images here

April 3, 2020

Lit R/C Products black screw tray

Available now from Lit R/C Products is their small screw tray in a new, black surface finish. The aluminum screw tray is a perfect addition to any pit or workbench, providing a place to put small parts and hardware while building, maintaining or setting up a vehicle. The tray is super thick and heavy to prevent it from moving around. They also now have a magnet installed to further prevent the loss of small screws. Machined silver edge details and a Lit logo makes the part stand out.

Source: Lit R/C Products [litrcproducts.com]

April 2, 2020

Hudy Air Vac on-road vacuum pump & tray set

Coming from Hudy is a new set consisting of the Air Vac vacuum pump for on-road shock absorbers as well as a handy tray. The vacuum pump is ideal to remove air bubbles from 1/8th, 1/10th and 1/12th scale shock absorber and gear differentials that can occur during building or refilling with silicone fluid. Having a bubble-free shock and diff leads to more predictable performance which is essential for a good performing car. The pump is powered by an optional 12V or 7.4V power source and included comes a 5-compartment aluminium tray ad well as a premium Hudy hardcase bag for effortless storage and transportation of the set.

View another image here