Red RC » Tools

March 19, 2018

Hudy touring car tweak board set

Hudy have released a tweak board set for 1/10th touring cars. The tool helps to remove any tweak from the chassis and it utilises a lightweight chassis counter plate as well as a lightweight carbon fibre rod with aluminium caps, the latter is used to hold down the chassis on its shock towers after loosing the top deck screws. With the rod pressed down the screws will be tightened again with he result being a totally flat chassis, bulkhead and topdeck assembly. The tweak board set comes in a protective carrying bag for easy storage and transportation.

View another image here

March 16, 2018

JConcepts Ryan Maifield Momentum car stand

Coming from JConcepts is the new Ryan Mayfield Momentum car stand. The RM signature edition car stand is formed in durable material and sports a matte black finish, making it handy, lightweight and stylish. The stand has a rectangular build with sturdy base which fits a large variety of 1/10th and 1/8th scale vehicles. The shape is ergonomic allowing drivers to pick-up the stand using one hand while the vehicle is still in place. Cut-out sections on the stand help rigidity and helps build a muscular physique. The item includes a thick foam pad which installs in the upper recess located on upper ring. A full RM decal sheet is included which features a number of panels to fully trick out the look. The graphical theme is based on the iconic Maifield paint scheme using an array of blues, red, silver and charcoal colouring. One side shows a 1/10th off-road buggy celebrating the IFMAR World Championship titles and the other shows off the 1/8th buggy and a classic Maifield trackside interview quote about the difficulty of racing.

View another image here

March 14, 2018

Vision Racing Products V2 shock stand

Coming from Vision Racing Products is their new V2 Shock Stand for both 1/10 and 1/8 off-road vehicles. The 3-piece shock stand features a carbon fibre top and base, along with an aluminium centre post and it sports slots to hang the shocks upside down to drain, as well as small pegs to hang the shock caps from to keep them clean. The carbon base features cutout pockets with felt pads and a small magnet on the front to hold items like shock nuts. The rear section of the base shows off a holographic VRP logo embedded within the carbon. The logo has a neat effect to it as it changes colour at different angles, providing the ultimate bling. The V2 shock stand comes including a felt storage pouch and it is available now.

View more images here

March 14, 2018

Muchmore electric power driver tool tips

Muchmore have introduced new tool tips for their Professional electric power driver. The 100mm blades are available as 7mm or 5.5mm nut driver as well as 3mm, 2.5mm and 2mm allen wrench. All feature a gold-coloured surface coating for wear and they are a direct fit with Muchmore’s recently introduced electric power tool.

View the other tool tips here

March 12, 2018

JConcepts Satellite tire mounting rubber bands in red

JConcepts have introduced a new take on a classic product, the Satellite tire mounting rubber bands are now available in red. A uniquely molded design, specifically developed for tire mounting, the rubber band is produced in a high-elasticity material capable of stretching to a full assortment of different sized tires. Finely detailed array of handles are designed to ergonomically conform to your fingers so the user can deftly adjust the rubber band to the sidewall of each tire to apply the pressure where it is needed. Includes 4 bands per package.

Source: JConcepts [jconcepts.net]

March 12, 2018

Hudy 2.5mm ejector pivot pin & alternating pivot

Hudy have introduced a 2.5mm ejector pivot pin and 2.5mm alternating pivot for use with Hudy’s drive pin replacement tool to replace 2.5mm drive pins in drive shafts in addition to previously available 3mm version. One of the leading causes of ill-handling cars comes from improperly working suspension caused by drivetrain binding. In cars of all scales it is important to check and regularly replace the drive pins before they wear flat. A worn pin can cause inconsistent handling and poor overall performance. It is well known that drivers in the past have gone to great lengths to either replace their pins frequently or incur the cost of replacing the compete drive shaft.

Source: Hudy [hudy.net]

March 8, 2018

Muchmore Tweakmaster Ver.4 chassis tweak tool

Coming soon from Muchmore is the Tweakmaster Ver.4 chassis tweak tool for 1/10th touring cars. The anti-tweak rod now features three holes for the antenna, motor mount post and spur gear while the anti-tweak plate is of a thinner and lighter design for easier carrying and storage. The tool, that is used to ensure the chassis, bulkhead and top deck assembly is tweak-free, comes in a protective pouch.

View more images here

March 7, 2018

Hudy Professional Multi Tool

Hudy have introduced their new Professional Multi Tool, functional pliers for a multitude of applications. The tool is machined from 7075 aluminium and it incorporates 2-3mm and 3-4mm shock shaft holders, 1/8th and 1/10th shock body holders, a universal 5mm holder, soldering jig holes for 4mm and 5mm bullet-type connectors, as well as removable small and large pins to hold pivot balls during assembly or disassembly. Also incorporated is an engine sleeve holder. The tool is usable for 1/5th to 1/28th scale cars as well as boats, drones, planes and many more and it comes black hard-anodised and with white Hudy graphics.

View more images here