SMJ have produced this convenient clutch holder that allows you to store a complete clutch as it has been taken from the engine. Simulating the end of the crankshaft the holder can be used to mount an entire clutch assembly from a .12 or .21 engine, keeping all the different parts and shims together. With the optional Infinity parts container you can keep your different clutches safely and conveniently stored, ready for when you need them.
RSRC, brand of multiple European Champion Renaud Savoya has updated their line of unique tools with new colours. The tools are now all available with a red & black handle and feature a gold 100mm long titanium nitride coated tip. The handle’s unique design ensures maximum torque and comfort and a full range is a available with hex tips available in 1.5mm, 2.0mm, 2.5mm, 2.5mm ball and 3.0mm with the nit drivers coming in 5.0mm (M2.5), 5.5mm (M3) and 7.0mm (M4).
The Avid carbon fibre pit board is a perfectly flat surface for checking your vehicle’s setup and large enough for even 8th scale. It comes with a chamfered top edge, large rounded corners, matte finish and the Avid logo machined into the surface. Coming in at roughly 20 x 16″ / 495 x 395mm it will fit well in an Ogio 9800.
Source: Avid RC [avidrc.com]
Wallie Builds Factory Racing Products has released his X6 charger stand and tool rack. It cleans up the pit area by taking up a small foot print on your pit mat. Charger, power supply and main tools are readily available and organised for quick and easy use. It features a keyed in mount for the X6 charger and rack for the RL power supply which utilises the weight of the power supply to keep it from moving. The tool rack has space for MIP tools, 3 large handle, 3 small handle, 1 turnbuckle wrench, 3 speed tips and a 2nd turnbuckle wrench or the JC Xacto knife.
View the fully loaded tool rack here
The KWR Mini-Z tool stand is the perfect pit companion for the racer who enjoys a clean pit area. Specially designed to store everything you could possibly need including drivers, setup tools, up to 4 liPo batteries, a spare set of front and rear tires, a pen and knife. Weighing in at approximately 70 grams it is the perfect travel tool that you won’t leave behind. It can accommodate 4 hex or socket drivers, droop blocks, pen, knife, spare tires and batteries. There are two generous storage areas for screws and other parts which you don’t want to lose. The Tool Stand is 3D printed in high quality ABS plastic and is incredibly light weight and strong which makes it perfect for travelling.
View more images of the tool stand here
KWR Engineering are pleased to introduce their brand new setup station specially designed for the GL-Racing GLA 4WD touring car. The station locks the car into position, allowing you to adjust front toe, left and right steering throw, and rear camber so your car tracks perfectly straight and handles to perfection. The station is extremely compact, with the setup wheels plugging into the main body of the setup board and the camber gauge holding everything in position. Using the setup wheels and camber gauge you can get a perfect rear camber setting of either 1.5 degrees, 2 degrees or 2.5 degrees.
View more images of the setup station here
Mon-tech Racing have released this body checker tool for checking the bodywork of both 1/10 touring car as well as 1/12 pan car. The tool can control the maximum height, maximum width, wing size, wing position and rear body cut on 1/10 TC while it can also check the maximum height on the the 1/12 Pan Car.
Source: Mon-Tech [mon-techracing.net]
JConcepts is making the job of taking your tires on and off a little easier with the release of the Finnisher magnetic T-handle wrench. With the locking wheel nuts of today such as the new JConcepts serrated wheel nuts, the initial spin is always easy, however, once you lock, it’s important to have a T-handle to clinch against the wheel. One of the trends is to feature a magnet inside the wrench to allow for quicker or user-friendly tire changing and maintenance. The wrench is designed so a driver can quickly spin with the tip of the wrench in a conventional style and then move lower to the T-handle portion to lock into position. The main structure of the design is aluminium and anodised blue, while the T-handle is constructed of steel with a black oxide finish attached to aluminium finger paddles for the feel and touch to adjust easier and with less pain. The wrench has etched size and JC logos for authenticity and identification.
