Coming from Arrowmax is their new -3mm to 10mm droop gauge for 1/8th and 1/10th vehicles. Designed for the use in combination with 20mm chassis blocks the CNC-machined alloy gauge comes black anodised and with the company’s signature golden anodised details.
Source: Arrowmax [arrowmax-rc.com]
Arrowmax have expanded their range of black and golden tools by a 10mm droop gauge. Usable for 1/10th scale vehicles the tool offers a -3mm to 10mm range and it is made from high-quality aluminium. The black and golden anodising suits Arrowmax’ signature tool line and the gauge is available now.
Source: Arrowmax [arrowmax-rc.com]
Coming from Ultimate Racing is their new turnbuckle and nut wrench. Small and lightweight it is designed for 3mm, 4mm, 5mm, 5.5mm, 7mm and 8mm hardware with the steel material making for high durability. Laser-etched markings help with easy identification while the black surface treatment further increases wear resistance.
Source: Modelix Racing [modelixracing.com]
New from Techra is the Edition X Setup Wand. Same as the original but coming in a black/orange anodised finish the tool includes a 22mm and 19mm bulkhead alignment block as well as a pair of 10mm chassis blocks, droop gauges and an on-road ride height gauge. The Edition X tool is available now.
Team EAM have introduced acrylic holders for the Hudy setup stations for both touring car and 2WD on-road. The magnets in the base will keep the setup stands from falling over and keep them neat and organised on the pit table and they also sport a slot in the back for the toe plate. Dedicated milled-out pockets also hold the wheel nuts for both TCs and pan cars.
Coming from T-Works are two short nut drivers in 7mm and 5mm specification. Both are made of high-quality aluminium and they come black anodised and with silver edge details for looks. The 7mm variant, made for the M4 wheel nuts of 1/10th scale vehicles, features additional holes for screw driver blades that can help to crank even tightly fitted nuts while the 5mm variant is usable for the M3 nuts used to hold pistons and other parts on RC vehicles.
New from RC Maker is the updated Tire Line Remover Tool. Based off the same concept as the original Tire Line Remover, the V2 is stronger, sharper and safer to use. The tool was designed to cut the centre moulding line off rubber tires, specifically for touring car and formula applications, allowing maximum tire performance from the first lap without grinding or sanding of the tire’s surface.
Arrowmax have introduced three anti-slip tool jackets made from high-quality silicone. Available in 14mm, 18mm and 22mm sizes the slip-over boots improve tool handling when having to deal with wet or oily environments when bare aluminium tool handles can get uncomfortably slippery. The semi-transparent tubes address this issue as are easy to install and remove and they come in packs of four per size.
