Red RC » Tools

January 18, 2016

GForce shock synchroniser tool

GForce have introduced the shock synchroniser tool for the use with dampers of up to 122mm of length. Machined from high-quality aluminium the tool allows to precisely adjust parameters such as shock length, rebound or spring preload as it directly compares the behaviour of two shock absorbers during compression or expansion. Four thumb screws make for easy and convenient shock mounting while laser-etched metric and imperial scales display the exact measurements. The tool is available is black or blue anodising.

View another image here

January 14, 2016

Mugen droop gauge & MBX7 balance weights

Mugen Seiki have introduced a droop gauge as well as two balance weights for the MBX7 line of off-road vehicles. Starting with the gauge, the tool is made to easily adjust the suspension droop as it slides over the upper shock mounting nut while the lower scale helps to read the actual suspension droop. The gauge is large enough to be used on both the MBX7 buggy and MBX7T truggy and, when used with the shocks alone, it also comes in handy to determine the shock rebound. Also new are the 20g and 40g balance weights for the MBX7 cars. They can be used in the front and the rear of the nitro-powered vehicles while the electric-powered variants only allow to mount the weights behind the front gearbox. The balance weights are marked for easy identification and they easily attach using screws and the pre-drilled holes in the chassis.

View more images here

January 11, 2016

Arrowmax body post trimmer

New from Arrowmax comes a body post trimmer for 1/10th touring car body posts. The aluminium tool makes use of an optional cutter knife or scalpel blade and it allows to easily and conveniently cut the body posts to size while creating a clean chamfered edge in a second step. The result is a visually pleasing body stay with the chamfered edge also making for easier body installation. The tool is made from anodised aluminium, it comes in grey, black and purple anodising but without the needed blades.

View more images here

January 8, 2016

Yeah Racing M-Chassis aluminium setup wheels

Coming from Yeah Racing are dedicated aluminium setup wheels for Tamiya’s M-Chassis and other compact-size 1/10th cars. The smaller diameter compared to standard 1/10th scale setup wheels makes for the most accurate suspension geometry adjustments. The wheels are cut from high-quality aluminium, they feature rubber O-rings to reduce slipping and sliding on the setup board and also included come thumb nuts for easy and convenient fastening without scratching the wheel’s surface.

View another image here

January 6, 2016

TWT acrylic 1/8th off-road camber gauge

New from TWT comes an acrylic camber gauge for 1/8th off-road vehicles. Made from blue acrylic material the gauge allows for easy camber adjustment in a range of 1 to 3 degree and additional graphics on the gauge make thickness identification of caster and roll centre shims easy. The gauge is available with grey or black stickers and also in personalised designs.

Source: TWT [twt-rce.com]

December 31, 2015

TWT acrylic setup boards & car stand

Thai company TWT has introduced a range of setup and pit boards as well as car stands made from high-quality acrylic material. Starting with the setup and pit boards, the multi-layer parts are available in a range of layouts, from pure setup boards with grids for track width and toe adjustment up to several pit boards of different layouts with foam padded compartments for shocks, springs, screws and shims. All boards also feature scales as well as scale drawings of washers, bearings and screws to help with easy hardware identification while building, tuning and maintaining. Also new are car stands made from the same acrylic material that again feature several padded compartments, hardware identification graphics and foam padded areas to make sure nor the chassis or car stand become scratched during use. The high precision of the car stands also allows to use them as an anti-tweak board for touring car chassis. They fit right into dedicated compartments in the pit boards for a nice and tidy pit space and both the boards and cars stands are available in several standard colours but they can also be ordered with individual designs.

View more images here

December 28, 2015

JConcepts 17mm Fin Quick-Spin wrench

Following the 7mm Fin Quick-Spin wrench, JConcepts now also have a 17mm variant for 1/8th off-road wheel nuts available. The wrench is designed so a driver can quickly spin with the tip of the wrench in a conventional style and then move lower to the T-handle portion to lock into position. The main structure of the design is aluminium and available in either blue or black anodised colours while the T-handle is constructed of steel with black oxide finish to provide the strength and muscle to the build. The tool is finished off with laser-etched size markings and JC logos.

View another image here

December 25, 2015

JConcepts 7mm Fin Quick-Spin wrench

JConcepts have introduced their new 7mm Fin Quick-Spin wheel nut wrench. With the serrated locking wheel nuts of today the initial spin is always easy, however, once they start to lock, it’s important to have a T-handle to clinch against the wheel. The wrench is designed so a driver can quickly spin with the tip of the wrench in a conventional style and then move lower to the T-handle portion to lock into position. The main structure of the design is aluminium and available in either blue or black anodised colours to provide the look and feel to the wrench. The T-handle is constructed of steel with black oxide finish to provide the strength and muscle to the build.

View the black colour wrench here