Red RC » Electric

July 25, 2015

Motiv RC M-Code Pro Tuned brushless motors

Motiv RC have introduced the M-Code Pro Tuned brushless motors for 1/10th and 1/12th applications. The motors offer a short stack design, specially selected stator material for low power loss and they use high-quality pure copper wire for the windings. Other features include gold-plated solder tabs, a sintered rotor, high-quality neodymium magnet material and all-aluminium, high airflow cans for lower operating temperatures. Every M-Code motor is hand checked, assembled, and packaged by a professional in house at the WI, USA office and included with each motor is an analysis and quality control spec sheet. This Sheet is filled out on a motor to motor basis all threw testing and assembly and includes information unique to your M-Code motor. Available is a range of windings including 3.5T to 8.5T modified and 10.5T to 21.5T stock variants.

Source: Motiv RC [motivrc.com]

July 25, 2015

Reedy 423-S AC/DC charger & battery combo packs

Reedy’s 423-S AC/DC Compact Balance Charger is now available bundled with a choice of either a WolfPack 3000mAh NiMH or WolfPack 3300mAh LiPo battery. The compact balance charger is easy to use thanks to its single-button operation and the charging process is as simple as connecting the battery, selecting the battery type, and pressing the start button. It is highly versatile as it is capable of charging LiPo, LiFe, NiMH, or NiCd batteries, making it a one-stop solution for enthusiasts who want the flexibility to charge a variety of different battery types for a wide range of vehicle types and scales. Each battery comes equipped with low-resistance T-plug connectors and are quality constructed for maximum performance and durability.

Click here to view the features and specifications

July 24, 2015

Hobbwing XeRun XR10 Justock & Justock 3650 motor

Hobbywing have introduced the new XeRun XR10 Justock brushless speed controller and Justock 3650 sensored brushless motor. Starting with the controller, the device was especially designed with zero timing/boost racing in mind. Featuring an aluminium upper case with built-in heatsink and making use of internal heat-conductive copper plates the controller stays cool even in high ambient temperatures and in demanding racing conditions. The small footprint allows the controller to be used in a range of classes including touring cars, 1/12th and formula cars and the single-button setup helps to fine-tune the software settings. As usual the controller’s firmware can be updated using the Hobbywing USB Link software and the LCD Program box.

Click here to continue reading

July 22, 2015

Castle Creations Mamba Micro X brushless ESC

Castle Creation soon have the new Mamba Micro X brushless speed controller available. The waterproof speedo is suitable for 2WD or 4WD vehicles such as the Mini-LST, Half-Eight, Mini-Quake and Spyder vehicles. The controller received a heavy-duty BEC to handle today’s high-draw digital servos and also features a programmable auxiliary wire that allows the user to make “on-the-go” adjustments to several settings, such as torque control and max throttle, directly from a compatible transmitter. This allows to fine-tune the performance of the Micro X to meet changing driving conditions. New to the Micro X is the ability to run sensored brushless motors with the purchase of an optional sensor harness. The Micro X is cable of running on 2S up to 3S LiPo power with a highly-efficient heat sink design to keep the controller running cool, even when pushing it hard in mud, sand and other heavy power applications. The ESC is available as controller only or as controller plus motor combo.

Click here to view the specifications and another photo

July 21, 2015

Flash Point LiPo receiver & transmitter battery pack

New from Flash Point R/C Racing Products is a 2S LiPo 7.4V 2500mAh battery pack. Made with the highest quality cells and using durable 20AWG silicone wire, the battery was designed not only as 1/10th and 1/8th scale nitro car receiver battery, but it can also be used to power most transmitters. The battery comes fibre wrapped, covered in black shrink wrap it is pre-wired with a universal plug and a balance lead for easy operation.

Source: Flash Point [flashpointrc.com]

July 19, 2015

Elangears Cube Pro micro DC charger

Elangears have introduced the Cube Pro, a 26W micro DC charger for up to 3S LiXX and 7 cell NiXX battery packs. Weighing in at only 100g and measuring 60x47x28mm the compact charger offers selectable 1A, 1.5A and 2A charge current at 11 to 16V input and it comes in an orange anodised aluminium heatsink case with built-in balancer for save and convenient operation.

Click here to view the specifications

July 17, 2015

SkyRC S60 60W multi-chemistry AC charger

SkyRC have introduced the S60 multi-chemistry AC charger. Housed in a compact case the 60W charger offers several charge programs including a dedicated high voltage setting for the latest generation of LiPo cells that allow a charge end voltage of 4.35V per cell. Several safety features including capacity and automatic charging current limit allow for a convenient use of the device that sports a back-lit display and a 4-button operation. Furthermore the charger can be coupled to Windows-based PCs to increase the versatility and for software updates. The package is rounded out by an internal balancer and a build-in fan unit. Click here to view the specifications and another photo

July 10, 2015

Team Orion dDrive 2-in-1 brushless power unit

Team Orion have introduced their all-new dDrive 2-in-1 brushless power unit for 1/10th scale on-road and off-road vehicles. The revolutionary system combines a highly efficient and very powerful 4-pole brushless motor and a brushless controller in one simple to use package. Coming from the mind of Oscar Jansen the unit is used in place for the usual motor and is very easy to setup while the integrated system uses only a minimal amount of wires for improved reliability and less hassle especially for beginners. The integrated controller offers three different drive modes, user-adjustable performance settings, overheat protection and low-voltage cut-off while the 4-pole motor is housed in an aluminium heatsink can. The 58mm long unit is splash-proof, it comes pre-wired with a T-type connector and it is available as 2700kv and 3000kv variant.

Click here to view the features, video and more photos