Red RC » Electric

January 25, 2010

Team CheckPoint 14.8V 5400mAh LiPo pack

Team CheckPoint’s new 14.8V 5400mAh 4S 35C LiPo racing pack offers outstanding endurance for uninterrupted running. Competition-level racers will appreciate the power output this pack gives while the hard case construction stands up to any impact racing might deliver. Perfect for 1/8th scale brushless buggy and truggy competition, the cells are expertly matched for internal resistance, voltage and capacity. Available mid February.

Source: Team Checkpoint [bestrc.com]

January 25, 2010

Speedzone 1S Hard case saddle pack

Speedzone releases the first ever 1S hard case saddle pack, giving all 1/12 scale T-bar car owners a true option when it comes to LiPo packs. Rather than shifting around electronics and rebalancing the car to fit a standard LiPo, a LiPo saddle pack offers up a perfect solution and a perfectly balanced 12th scale car. Naturally, this pack is not limited to 1/12 scale and can be used for all 1S applications which accept the pack’s dimensions.

Click here for more information

January 21, 2010

Team Epic Dirt Oval motor & 1-cell rotor

New from Team Epic is this Nemesis Project 7.5T high torque dirt oval motor. Featuring a high power rotor for dirt oval and off-road, it delivers lots of low end power to keep your car from bogging off the corners. There is also a new rotor for Nemesis modified motors used for 1-cell racing. The diameter and magnet strength is designed to increase rpm and power when using the 50% less voltage of a 1 cell pack. A red end cap is for easy identification and it is ROAR legal for both spec & modified classes.

Click here to see the rotor

January 21, 2010

Reedy Wolfpacks now Deans Ultra Plug equipped

To satisfy the demands of enthusiasts worldwide, Reedy Wolfpacks are now available equipped with Deans Ultra Plug Connectors in 6-cell 7.2V and 7-cell flat 8.4V versions. Wolfpacks are assembled using Reedy’s high-tech NiMH sub-C SC-R cells which features high capacity for extended run times while delivering maximum output thanks to its current carrying capabilities and ultra-low internal resistance. To improve power output, prevent meltdowns, and increase reliability, an industry-standard Deans Ultra Plug connector has been fitted and to further minimize power-robbing resistance and heat, welded connections between each cell and thick 14AWG silicone power wires ensure maximum performance and reliability. An adapter is also available that allows you to charge these new packs with chargers that use a Tamiya-style output.

Source: Reedy [reedypower.com]

January 20, 2010

ProTek R/C 5400 & 5000mAh LiPo race packs

A Main Hobbies today announced four new ProTek R/C brand LiPo packs, starting with this 4-cell hard case pack with 5400mAh of capacity and a true 35C constant discharge rate. This pack includes an integrated balance charge lead with a Deans style T-plug installed. Next up is a 2-cell hard case 5000mAh pack with a true 40C constant discharge rate that includes heavy duty bullet connectors and a balance charge lead that you can solder onto the wire of your choice. The bullet connectors also feature side cut-outs for soldering on wires to fit in tight areas or in cars with low upper deck heights. A similar pack this other 2-cell 5000mAh pack also has a true 40C constant discharge rate but includes an integrated balance charge lead with a Deans style T-plug installed. Finally, a 1-cell 5000mAh hard case pack which has a true 40C constant discharge rate and includes a Deans style T-plug installed.

Click here to see the other packs

January 19, 2010

CRC Maxxcell 5200mAh 1S LiPo pack

CRC have entered the battery market with their new Maxxcell line of LiPo racing batteries. Featuring a low profile terminal design, convenient 4mm bullet tubes (photo shows prototype), low internal resistance (IR), high average discharge voltage and long run time, the Maxxcell LiPo is a proven winner. The 50C peak discharge rates deliver the punch, while a true 5200mAh delivers the run time. The 4mm tubes and bullet connectors closely replicate the solder tabs most every racer has used for years. Wired batteries with connectors are inconvenient and difficult to use as each manufacturer uses different placement, wire lengths and connectors, plus space is tight in most 1:12th road racers, all that wire and connector bulk takes up valuable room. With the bullet connectors, the wiring is much cleaner, efficient and lightweight. The pack is ROAR legal and is built to fall within the rules of IFMAR, EFRA, BRCA and ROAR.

Source: CRC [teamcrc.com]

January 18, 2010

Speed Power 3.7V 5500mAh 45C LiPo pack

Speed Power have released this 1 cell 5500mAh racing LiPo battery, perfect for 1/12th scale racing. This hard case 3.7V pack features a discharge rate of 45C, weighs in at 151 grams and comes supplied with a Deans plug connector. EFRA and ROAR approval pending.

Source: Speed Power [speedpowerrc.com]

January 18, 2010

Speed Passion Ultra high active power connectors

Speed Passion have introduced two new 5mm ultra high active power connectors. Featuring a special design, that is non reversible and has a clamping system to prevent them coming apart, these high performance racing connectors are available in 2P versions for battery connectors and 3P for brushless motor connectors.

Click here for more connector images