Red RC » Electric

August 29, 2017

Maclan Racing MMax Pico 100A stock racing ESC

Coming from Maclan Racing is the new MMax Pico 100A stock racing brushless speed controller. Looking similar to the MMax Pro the Pico is in fact a completely newly designed full aluminium case structure with 13AWG pre-soldered cables and redesigned power capacitor module. The new design reduces weight by 35 percent and sits 3mm lower in height compared to the MMax Pro. The controller adapts the same Microchip PIC32 platform as its big brother for exceptional performance and the ESC also has a redesigned power management control board that enhances durability and power output for extreme stock racing. The package is rounded out by the new B1.0 firmware that provides the best possible throttle and brake control. The speedo will hit stores about mid-September.

View the feature and specifications here

August 28, 2017

Reedy Pro LiPo/LiFe RX & TX battery packs

Reedy have introduced their new range of Pro LiPo and LiFe RX/TX batteries that feature high capacities and durable construction, which make them perfectly suited for use as receiver batteries in nitro-powered vehicles. They are also a long-life alternative to NiMH and alkaline batteries in a variety of transmitters. A standard power plug fits directly into the transmitter or receiver/switch harness while a XH balance connector allows for simple balance charging. The LiPo batteries are available as 2400mAh 7.4V flat or 2700mAh 7.4V hump pack while the LiFe packs come as 1600mAh 6.6V flat or 1900mAh 6.6V hump variant.

View the other new battery packs here

August 24, 2017

Tekin RS Pro Black Edition ESC & Spec-R BL motors

Tekin have introduced their new RS Pro Black Edition brushless speed controller and Spec-R motors. Starting with the ESC, the RS Pro Black Edition was developed with ultra low internal resistance in mind to boost the performance of 1S and 2S-powered stock motors. This was achieved by utilising both hardware and software advances in combination with the Ultra Low Resistance ULR circuit design and ULR flex wires. The controller measures 24.5x33x17.25mm, it weighs in at 35g and it has no motor limit, however Tekin recommends their RSX controller for all modified applications as these setups tend to run at higher temperatures and so the billet housing and fan shroud on the RSX will provide more sufficient cooling.

Continue reading here

August 24, 2017

Speedzone introduce new modified & stock BL motors

Speedzone have introduced their latest brushless motor based on months of testing and previous customer feedback. This latest motor is the most powerful, efficient, tunable and lightweight motor ever offered by Speedzone. The motor’s can was built to allow maximum air flow, keeping temperature cool and the motor efficient. The stator was designed to produce the very best resistance while being as light as possible without sacrificing performance and power. In addition, the sensor board was built with strict tolerances which now translates to evenly distributed sensor board numbers. A variety of spec and modified turns are available and they are bench tested to ensure sensor, stator and ball bearings are all functioning to a strict quality control. Optional spec and modified rotors will be available for tuning to various track surfaces and conditions.

View the features and more images here

August 23, 2017

Yuki Model digital battery capacity checker

Coming from Yuki Model is the new digital battery capacity checker. Usable with all batteries or balance wires that utilise JST EH or XH balancer ports, the battery checker is able to display the overall battery or single cell voltage of Lithium-based 2S to 8S batteries while also telling about the remaining battery capacity, highest/lowest voltage and voltage differences. Additionally the device is usable with 2-cell to 4-cell NiXX packs and it includes balancer and discharge functions beside a servo and ESC tester.

Source: Yuki Model [yuki-model.de]

August 23, 2017

Castle Creations Mamba X E-Buggy Racing Editions

Coming from Castle Creations are two new Racing Editions controller and motor combos for 1/8th E-buggies. Both make use of the Mamba X sensored speed controller that features Castle Creations’s latest firmware for smooth yet powerful throttle and brake control, data logging capacities including motor and speedo temperature and it features a strong 5.25V-8.0V 8A BEC system. A waterproof aluminium housing makes for go-everywhere capabilities and it measures a compact 54.4×35.2×30.0mm while weighing in at 101g. Included in the set are either the ROAR Mod approved 1512-1800kv or ROAR Mod pending 1515-2200kv brushless 4-pole/12-slot motors.

View the specifications here

August 23, 2017

Reedy Zappers 15.2V 4S 6400mAh LiHV hardcase battery

Reedy’s Zappers Lithium batteries are now also available in a 4S LiHV version for 1/8th E-buggies and trucks. Originally referring to Reedy’s proprietary NiMH voltage enhancement technology, Zappers describe Reedy’s high-voltage LiPo battery chemistry. A 15.2V nominal voltage means that with a suitable charger, the battery can be safely charged to 17.4V total or 4.35V per cell. Even when the typical 16.8V or 4.2V/cell charging limit is enforced, the battery still offers a significant advantage thanks to a flatter discharge curve, which results in more voltage deeper into the race. A high-quality, durable hardcase helps prevent damage while embedded socket connectors keep power-robbing resistance to a minimum. A charge lead, balance lead, and male 5mm ESC connectors are included.

Source: Team Associated [teamassociated.com]

August 22, 2017

Hitec X2 AC Plus Black Edition charger

The expansion of the Hitec charger line continues with the introduction of the X2 AC Plus Black Edition AC/DC dual balance charger and discharger with built-in power supply. With increased capacity and compatibility, this portable, compact and reliable charging unit affords flexible charging of all battery chemistries whether both at home or in the field. Its leading-edge power distribution mode allows efficient assignment of output power based on individual battery requirements while the Voice Guide feature makes for easy, user-friendly communication. It also features a built-in 10-amp power supply, internal balancing circuits and ten different charge/discharge profiles. The device is rounded out by Hitech’s “Scan to Go” feature and smartphone control via Bluetooth.

View more details here