Red RC

February 10, 2020

Valtier & Guerbois win at Gargenville Indoor race

The Team Electric Buggy Club of Gargenville, France held their Indoor Electric Off-road Race this past weekend. In the 2WD Open Buggy class it was Team Associated driver, Ludovic Valtier with the overall win, courtesy of winning the opening two A-mains as A3 winner, Francois Guerbois (Xray) came in 2nd overall. Thomas Roland (Kyosho) would end the day on the 3 spot and in front of Cedric Devillers. In 4WD Open it was Francois Guerbois with the overall win from Thomas Roland in 2nd and Emmanuel Da Cruz in 3rd.

Image: Francois Guerbois

February 10, 2020

Jason Nugroho wins at West Java Open Race Rd1

The West Java Open Race round 1 was held at the Maxspin Offroad Raceway this past weekend. The event was held in 1/8th Nitro Buggy and 1/10th Electric Buggy classes and in Nitro Buggy it was HB Racing’s Jason Nugroho with the overall win, a lap in front of Kyosho’s Ray Timothy. HB Racing driver, Reza R. would complete the podium some nine seconds behind Ray as Ibe and Yoko completed the top 5 result.

Image: Arief R.

February 10, 2020

X-Grip Dynamic body lever V2

Coming soon from X-Grip is their new Dynamic body lever V2, an accessory that attaches to the front suspension of electric touring cars such as the WRC STX.6 and Xray T4 and that helps to make body movement independent from chassis movement. The body lever is 3-D-printed from high-quality material, it weighs in at only 1.6g and it was designed to attach between the suspension C-hub and upper camber link ball. A special plastic screw adjusts the distance between the platform and the body shell so the body is resting on the platform, ensuring the front body height and ground clearance maintains constant even under chassis rolling and suspension compression. It is required to allow the front of the body to float on the body mounts which can be achieved by simply attaching the retaining body clip one or two positions higher than usual. The new V2 variant is of an updated design that allows to remove the lever part quicker if needed and it is usable with the WRC Racing STX.6, the Xray T4 and many other classic suspension touring cars.

View more images here

February 10, 2020

Amirul Rafiq wins at KL City Day race

The KLIRCC track of Kuala Lumpur, Malaysia played host to the KL City Day race this past weekend. In the 1/8th IC Track class Shepherd’s Amirul Rafiq took the overall TQ after winning all three rounds of qualifying and he also went on to win the 40-minute A-main event with a controlled pace and despite dropping the warm-up to the final due to transmitter issues. Xray’s KK Lim came in 2nd, some 17 laps behind as ARC’s Yong Kok Lun completed the top 3 podium result in 3rd, another five laps down.

Image: Amirul Rafiq

February 10, 2020

Bryce Butterfield wins at 2020 Steel Series Rd2

The second round of the 2020 Steel Series was held at Steel City RC Speedway in Fontana, California this past weekend. In the 1/10th 200mm Nitro Sedan class it was Bryce Butterfield with the overall TQ from Michael Palazzola on the runner-up spot after the qualifiers. The 15-minute A-main event then again saw Bryce Butterfield (Serpent) holding the upper hand, bringing home the silverware one lap ahead of Brian Thomas (Mugen). Serpent’s Walter Diaz came in 3rd to round out the podium result, another lap down.

Image: Bryce Butterfield

February 10, 2020

MST CS-R carpet drift car tyre

Coming soon from MST is their CS-R drift car tyre for high-grip carpet tracks. The tyre is usable with most drift car wheels and due to its design it is usable with up to 7 degrees of wheel camber.

Source: MST [rc-mst.com]

February 10, 2020

Louth RCCC Schumacher Winter Series Rd5 – Report

The fifth round of the 2019/20 Schumacher Winter Series presented by the Louth Radio Control Car Club took place over the past weekend. In Touring 13.5T Mitch Fiddling would set the initials pace in the opening round. Chris Lovely would pick up the mantle and take the further two rounds of qualifying with his Xray T4’20. Alex Brocklebank would take his Schumacher Mi7 to take the top spot in the final qualifying round giving him 2nd overall. Callum Chapman would take his mid-motor Xray to 4th with some consistent driving. Joseph Cocking take his Yokomo BD10 to 5th, Jay Kay with his BD9 would slot into 6th and Daniel Burks would round out the A-final with his Xray T4’20.

Continue reading the report here

February 10, 2020

Capricorn C04 200mm nitro on-road kit – Coming soon

Italian company Capricorn has released a first teaser and information on their forthcoming new C04 1/10th nitro on-road kit. The follow-up model from their highly successful C03 platform will feature many new upgrades such as an all-new 7075 aluminium chassis which will feature shiftable weights under the fuel tank area for increased weight balance and stability. Also new is the ability to change the rear geometry greatly with the lower arms now mounted in adjustable inserts for up to twelve different geometry settings. Also new for the C04 is the ability to run a rear upper camber link instead of a solid arm, resulting in more flex for the lower arm, which can greatly improve the car’s rear traction in certain conditions. Other new features include an updated upper deck with a new fuel tank mounted from the top for easy removal of the tank, the battery will be mounted on the left side of the upper deck for optimsed weight balance, and there will be the option to change the front flex from soft to hard for a greater set up window in different traction conditions. New steering hubs will be another new feature to achieve a greater steering lock and rear CVD driveshafts will be available as an option. The kit is set for a release in late March.

Source: Capricorn [capricornrc.com]