Red RC

January 8, 2020

Vigor T4’20 rear belt tensioner with battery stopper

Vigor RC have introduced their new rear belt tensioner with integrated battery stopper for the Xray T4 2020 touring car. The machined aluminium part offers a milled centre section that allows for a height adjustment of the ball-raced belt tensioner in order to finely adjust the tension of the rear belt. On the opposite side a round head screw and bushings form a battery stopper that ensures the LiPo pack stays away from rotating parts. The belt tensioner is a direct fit, using existing chassis holes.

Source: Vigor [vigorrc.com]

January 8, 2020

Reflex Racing RSD X20 carbon fibre upper deck

Coming from Reflex Racing’s RSD brand and made for the new Serpent X20 mid-motor touring car is a new Quasi carbon fibre top deck. It offers an updated design for increased response, gear selection range and belt clearance while also offering improved durability compared to the stock version. The top deck is available as a 2.0mm variant for high traction surfaces and in a thinner 1.5mm variant for medium to medium-high traction conditions.

View the 1.5mm top deck here

January 8, 2020

Tamiya TRF420 brass suspension mounts

Tamiya have announced the soon release of their new brass suspension mounts for the TRF420 touring car. Available as 1-piece or 2-piece split A, E and XB variants, the brass mounts replace the standard and optional alloy suspension hangers, with the 1-piece mounts weighing in at 9.3g to 11.1g while the split mounts weigh in at 6.5g to 7.6g, depending on the variant. Adding weight in the front or rear of the car can help to fine-tune the weight balance and thus the car behaviour going in and coming out of the corner. Included with each suspension mount comes a set of suitable composite inserts to adjust toe, roll centre, and kick-up.

View more images here

January 7, 2020

Exotek D819 2-colour aluminium optionals

Exotek have introduced their new line of 2-colour aluminium option parts for the HB Racing D819 and E819 buggies. First up is a ball-raced heavy-duty steering crank set machined from high-quality 7075 aluminium. Usable for the HB Racing D819, E819, D817, and E817 series of buggies and trucks the steering set includes bearings and crush sleeves to convert the vehicle’s steering to be bushing free for long wear and less slop. The aluminium parts come polished and anodised in black with custom orange chamfers. Also new is a heavy-duty 7075 machined alloy steering brace plate for the D819, E819, D817, and E817 series of buggies and trucks. The plate adds visual impact and it comes anodised black with orange edge details. Last but not least is a factory style heavy-duty 7075 alloy centre bulkhead set for the electric E819 and E817 series of buggies and trucks. The alloy construction maintains proper gear mesh for longer gear life and reduces the chance of stripped screws coming loose in a race. Like the other parts the bulkheads come black anodised and with orange edge details.

View more images here

January 7, 2020

Pirani RC 1/8th on-road clutch system

Coming from Pirani RC is their new clutch system suitable for virtually all of today’s 1/8th on-road scale cars and brands. The Italian-made clutch offers maximum precision and exceptional quality with the flywheel being considered to be the lightest in the market, increasing overall RPM of the engine. The clutch bell is available in three different variants, depending on the car brand, all being made of specially surface-treated super lightweight 7075-T6 aluminium.

Source: Pirani RC [piranirc.com]

January 7, 2020

Michael Lee dominates UK Formula Indoor Nationals Rd2

The BRCA F1 Indoor National Championship made its way to the Sheffield RC Racing Club for round 2 of the series last weekend. With championship leader Ben Cosgrove unable to make the meeting it was going to be a round that would shake up the title race. The field were greeted with a fast flowing track that had lower grip levels than the previous round. Major setup changes would be needed to get the new Volante tyres working. With grip levels building up, the first round of qualifying was very open. Stephen Lander was the driver to handle the conditions best and the only one to break into 22 laps. James Greener and Michael Lee weren’t far behind though. Round 2 saw another increase in grip and allowed pre-race favourite Michael Lee to take control with a time that was over a lap faster. He continued this strong run in the third round to take the overall TQ. Stephen Lander had just managed to beat Graham to make sure he would be next in line on the grid. James Greener and Lee Carter would be the other hopefuls in 4th and 5th places respectively.

Continue reading the report here

January 7, 2020

Micha Widmaier sweeps 2020 Köngen Indoor Masters

The 2020 edition of the popular Köngen Indoor Masters was held in southern Germany last weekend, attracting nearly 140 entries. In 2WD Modified Buggy Micha Widmaier, Florian Kappes and Luca Rau battled it out for the overall TQ with Micha ultimately taking the overall TQ thanks to winning two qualifying rounds while Florian and Luca scored a round TQ each. The triple A-mains saw Micha winning the opening leg while Luca Rau won A2 as Micha scored a DNF. With the only 21-laps run in A3, Micha put things straight again, taking the overall from Luca Rau in 2nd and Jens Becker in 3rd.

Continue reading the report here

January 7, 2020

Lit R/C NB48 2.0 carbon fibre shock towers

Coming from Lit R/C Products are their new carbon fibre shock towers for the Tekno RC NB48 2.0 buggy. The towers are machined out of matte 3k twill carbon in 5mm thickness and they match the stock shock position geometry, however the front tower offers additional camber link positions and they are of a thicker and stronger outer profile to be more durable. The towers also have small chamfered edges to help prevent delamination. While adding a bit of visual impact the towers also are ten to 12 grams lighter than the stock towers for an overall lower centre of gravity.

View more images here