Red RC

November 22, 2019

Meen Vejrak takes the opening SIGP Nitro qualifier

Meen Vejrak has taken the opening round of qualifying for 1/8th Nitro at the ARC International Raceway in Xiamen. The Maxima team driver ended the 4 minute run 1.5 seconds in front of top seed Kim Ki Heung from Korea. Behind the leading pair it was Gary Huang for Xray in 3rd, while Motor King took 4th with Matrix front man Cristian Boni completing the top 5. Vejrak commented that when he initially put his car down, the former 1/10th Nitro WC running an Infinity chassis this weekend, it had no steering but an adjustment to the rear toe-in and his car was much better. Happy to make a clean run, Meen felt that his Maxima engine was a little rich at the start but pushing it harder it meant it cleared out and he could put in a good run.

Continue reading this report here or view our complete event coverage here.

November 22, 2019

Bruno Coelho is 2019 SIGP Top Qualifier

Taking his 3rd round of qualifying, despite a mid run mistake, Bruno Coelho has locked down the top qualifying spot here in Xiamen at the 2019 SIGP. The Xray factory driver briefly lost the lead when he rolled his car, allowing Dominic Quek to the front but once back on his wheels he set about regaining the lead to take the win and with it pole position for tomorrow’s A-main finals. Quek was just half a second back in 2nd, also running the new Xray, while an improved Meen Vejrak completed Q3 in 3rd. Akio Sobue was 4th for Infinity while Nicholas Lee was fifth. Bruno said that they made a small suspension change which worked well despite the World Champion being on 3rd run tires. Asked abut his high speed crash he said that he only just gently clipped the curb which sent his car into what seemed like a slow motion roll before stopping against the back side of a curb. He was able to continue and regain the lead and with the TQ his he will use the final qualifier to test.

Continue reading this report here or view our complete event coverage here.

November 22, 2019

GForce Bullet-D 4200mAh racing pack LiPo battery

GForce have announced the release of their new Bullet-D 4200mAh LiPo battery pack that mimics the shaped of an NiMH racing pack. The oval diameter design comes in handy especially when looking for a battery pack that is compatible with certain Tamiya or Kyosho cars or when running in vintage racing classes. The battery is built from high-quality 50C cells for exceptional power supply, it measures 134x45x23.5mm, and it comes pre-wired with a T-type connector and an XH balancer port.

Source: GForce [gforce-hobby.jp]

November 22, 2019

LRP black brass battery weights

LRP have introduced their new under LiPo brass battery weights. The weights are ideal to up the overall weight of on-road and off-road cars while allowing to lower the overall centre of gravity when running low centre of gravity battery packs. The weights are available as standard battery sized 139x47x0.5mm 28g, 139x47x0.79mm 44g and 139x47x1.05mm 59g variants and also as shorty battery sized 97x47x0.27mm 10g, 97x47x0.76mm 30g, 97x47x1.0mm 39g and 97x47x1.65mm 65g plates. All come with a black surface coating and in packs of two per size.

View the other balance weights here

November 22, 2019

7075.it T4 2020 aluminium & brass optionals

7075 Special Parts from Italy have introduced first option parts for the Xray T4 2020 touring car. First up is a low centre of gravity aluminium main chassis that allows for easy placement of balance weights using single screws. Machined cut-outs enable the racer to position optional brass weights which not only adds to the overall appearance but the weights are also secured in a much safer manner compared to just using tape to securing them to the chassis. The main plate comes machined from high-quality 7075 aluminium, it sports a black surface coating for wear and it is available separately or including a set of low-profile brass balance weights.

Continue reading here

November 22, 2019

Pro-Line 2020 Jeep Gladiator body shell

Coming soon from Pro-Line is their all-new 2020 Jeep Gladiator body for 12.3” scale crawlers. The Gladiator combines the iconic and unmistakable Jeep body styling with the utility and ruggedness of an adventure-ready truck. The body features all the scale Jeep Gladiator details and a sticker sheet that will completely transform the look of any scale crawler truck. The 1-piece body comes clear, so owners can customise the look of their truck in any way they desire including building an overlanding rig.

View more images here

November 22, 2019

Nikolas Schmitz doubles at HK-Cup opener

The opening round of the HK-Cup was held in Hürtgenwald in the western part of Germany last weekend. When the dust had settled and in the 2WD Buggy class it was Nikolas Schmitz with the win, coming from the 2 spot on the grid. Nikolas would secure the over with a win in A3, leaving behind Jean Baptiste Janssens and Markus Klein in 2nd and 3rd overall.

Continue reading here

November 22, 2019

Volante Bronze asphalt Tire Traction

Volante have announced the release of their new Bronze Tire Traction compound especially developed for the use in low to medium grip conditions. The tyre sauce is usable with both rubber and foam tyres and it will provide exceptional traction without accelerating tyre wear. The odourless formula of the traction compound allows the use at indoor tracks and it comes in large 40ml applicator pen bottles.

Source: Volante [volantetire.com]