Red RC

November 13, 2019

Schumacher Indoor Off Road Masters Rd2 – Report

This past weekend was the second round of the hugely popular Worksop Series and there was once again a huge entry of drivers across all classes of 2WD, 4WD, 2WD stadium truck and the Vintage Buggy class. As always it was round by round qualifying as the racing format, with the best two results from four rounds of qualifying counting towards the final position. The control tyre in the buggy classes is the Schumacher yellow Honeycomb, this works superbly well at Worksop. The track layout was superb, it was a fast layout but there were also many jumps and features in the track which everyone enjoyed. Qualifying in 2WD saw a dominating performance by Neil Cragg, taking TQ in three out of the four rounds to take pole position from Tommy Hall and Greg Williams.

Continue reading the report here

November 13, 2019

Leadfinger Racing SRX8 front scoop

Leadfinger Racing have introduced their new front scoop for the Serpent SRX8 and SRX8E buggies. Moulded from a thicker polycarbonate material for better durability, the scoop helps to fine-tune the buggies’ aerodynamic performance according to track characteristics and personal likings. The set includes two front scoops and it is available now.

Source: Leadfinger Racing [leadfingerrc.com]

November 13, 2019

BMT 016 GT Evo 1/8th nitro GT kit

BMT from Italy have introduced their new 016 GT Evo 1/8th scale nitro GT chassis kit. The car is based on the proven 016 GT and features refinements such as a new flex chassis, the Evo rear end conversion that as previously only available separately, it come with new short big bore shock absorbers as well as new shock stays and a redesigned front bulkhead brace. The parts will improve the car’s overall balance and performance and the kit is available from now on.

View more images here

November 13, 2019

Team Associated Factory Team Reflex 14B & 14T optionals

Team Associated have announced the release of a total of twelve new Factory Team option parts for the Reflex 14B and 14T ready-to-run cars. The range includes front and rear aluminium shock towers, 10x19mm and 10x25mm threaded aluminium shock bodies, blue anodised upper and lower shock parts, front and rear 10mm spring sets, a graphite battery strap, as well as an anti-roll bar set, silver titanium turnbuckles, aluminium wheel hex adapters and a metal driver gear set. Using the parts will not only add visual impact but also a lot of durability to the mini-size off-road vehicles.

View the other new parts here

November 13, 2019

Tessmann & Rivkin win Team Associated Off-road Champs

The Team Associated Off-road Championships were held at Trackside Hobbies and Raceway in Brookfield, Wisconsin over the weekend, attracting nearly 330 entries. The smooth and consistent high-grip track conditions made for very close racing and in the premier 2WD Mod Buggy class it was Xray’s Ty Tessmann with the overall TQ from Team Associated’s Dustin Evans on the 2 spot. The triple A-main events saw Ty taking wins in A1 and A2 for an early overall victory as Team Associated’s Spencer Rivkin cemented his overall runner-up spot by taking the win in A3. Dustin Evans, with 2-3-2 finished had to settle for 3rd overall and in front of TLR’s Dakotah Phend.

Continue reading the report here

November 13, 2019

Samix Enduro brass forward battery tray

Samix have announced the release of their new brass forward adjustable battery tray for the Element RC Enduro trail trucks. The black coated and laser-engraved part weighs in at 176g and it is suitable for standard and shorty-type LiPo battery packs. The construction shifts the weight bias of the truck further towards the front end for improved climbing performance, however it requires the use of Samix’s END-6068 or END-4068 front bumper mounts to make it fully work.

View more images here

November 13, 2019

Sunpadow CS Platin 6000mAh Stock class LiPo pack

Sunpadow have introduced their all-new Competition Stock CS Platin series high-performance LiPo battery packs. Developed especially for stock class racing, the first in the line is a 6000mAh 7.4V battery that is made using newly developed highest-quality cells whose chemistry will reduce the overall weight of the battery while allowing for exceptional performance thanks to a very low internal resistance. At 282g the battery is about four percent lighter than the gold label pack and it measures 139x47x25.1mm.

Source: Sunpadow [sunpadow.com]

November 13, 2019

LRP introduce new Team shirt & pit towel

LRP have introduced their new Team T-shirt and a redesigned pit towel. Starting with the blue colour T-shirts, they are made of high-quality light stretch material, sport high-quality prints on the front and back and their design allows the addition of additional sponsor logos. As for the pit towel, its new checkered flag design will keeping the driver in racing mode while building, maintaining or setting up his ride for the next race. The towel is made of high-quality materials and it is washable, ensuring it is looking good for a long time.

View more images here