Red RC

August 1, 2019

Pro-Line release new RC Body Paint colours

Pro-Line have added five new colours and additional 6-pack sets to their range of RC Body Paint colours. Specially formulated for polycarbonate, the paint is a high-performance durable water-based airbrush paint that is specially formulated to meet the extreme requirements of polycarbonate RC bodies. It is durable yet flexible to allow polycarbonate bodies to deform and come back to their shape. It is usable without further thinning and available as separate 60ml bottles or as 6-pack sets. New to the range are Dark Earth, Mars Red Oxide, Sting Yellow, Metallic Deep Blue, and Pearl Green colours. The 6-pack sets see the addition of a Military, Pure Metal and All Pearl sets.

Source: Pro-Line [prolineracing.com]

July 31, 2019

Adam Drake TQs & wins at 2019 Bring The Heat

The annual Bring The Heat race was held at Flowood RC in Flowood, Mississippi last weekend. The event had close to 200 entries and in the Expert Nitro Truggy class it was Adam Drake with the overall TQ and also the win in the 35-minute A-main event. Three laps behind it was Cameron Breaux on the runner-up spot as Aaron Royston came in 3rd to round out the podium another lap down.

Image: Adam Drake

July 31, 2019

Kyosho MP10T 1/8th nitro truggy kit – Coming soon

Kyosho have revealed first images and information on their forthcoming new MP10T 1/8th scale nitro truggy kit that will hit stores by the end of August. The main chassis is a 3mm 7075 aluminium plate with hard anodising and improved flex characteristics. Engine/fuel tank, servos, RX box and battery box have move forward for optimal weight balance. The MP10 radio plate design features a revised servo position and increased strength with 3.0mm thickness, increased from 2.5mm while side guards – by reducing thickness and height – are a lot lighter than the previous parts while and looking sharp as they narrow from the centre of the chassis towards the rear. Also included is a new updated fuel tank design for more durability and reliability while the new engine mount increases rigidity for a more balanced flex and pitch. The trucks new steering plate further improves cornering speed through optimisation of the Ackermann ratio. A new reversible steering plate enables eight different settings to match the specific characteristics of the racing surface and personal preferences. The optimised Ackermann in the MP10T delivers an increase in lock-to-lock steering travel. The design of the new reinforced tie rod ends doesn’t interfere with the inside of the tyre and wheel when steering is at maximum angle.

Continue reading here

July 31, 2019

Nejc Mihelic takes early Austrian 1/8 IC Track title

The third round of the Austrian IC Track Nationals was held at the LAMAC track last weekend. Due to bad weather prediction for Sunday all four qualifying rounds would be held on Saturday. Right from the start it was Nejc Mihelic who set the pace and with all four rounds completed it was still Nejc on top followed by Herfried Pucher and Michael Holler. On Sunday the rain arrived as expected and just when the main finals started. So the organisers had to call the race a day and by taking the qualifying results to determine the winner it was Nejc with the win from Herfried and Michael. With the win Mihelic already took the overall championship title thanks to scoring three wins in a row and with the season finale still to come in September.

Source: Xray [teamxray.com]

July 31, 2019

Trinity introduce new modified class rotors

Trinity have introduced two new modified class rotors for their XFactor, Monster, 24K, D4 and Killshot range motors. Available as silver-marked 12.3×25.5 RPM and pink-marked 12.5×25.5 torque variant, both Neo rare earth rotors come nickel-plated and marked for easy identification. The rotors are recommended for off-road and oval racing with the pink torque rotor being the preferred pick of Trinity’s Dakotah Phend’s to fine-tune the Monster 7.0T motor of his 2WD Buggy ride.

View the torque rotor here

July 31, 2019

VS Racing VSR03-EV2 .21 nitro on-road engine

Coming from World Champion Products is the VS Racing VSR03-EV2 3.5cc nitro on-road engine. Based on the O.S. Speed R2103 the super-long stroke engine is developed for high-class competition use and it features a 7-port design, CNC-machined piston and a 14mm “Rody” modified and DLC-coated crankshaft. New to the EV2 variant are optimised modifications to the crankshaft as well as a new combustion camber insert with a silicone O-ring that ensures a cleaner area between the cooling head and the crankcase. The engine is available separately or as combo set including VS2098 or VS2069 exhausts.

View lists of the features and specifications here

July 31, 2019

Cole Ogden TQs & wins at Southern Offroad Series Rd3

Round 3 of the Southern Offroad Series was held at S&B RC Speedway in Piedmont, South Carolina, attracting more than 160 entries. In the Pro Nitro Buggy class it was HB racing’s Cole Ogden with the overall TQ and he also came out on top after the 20-minute A-main event, leaving behind Kyosho’s Matt Merhring in 2nd, some three laps down. HB Racing’s Cameron Saxon would finish the main on the 3 spot with Nick Hartman and Dave Carmendy completing the top 5.

Image: Cole Ogden

July 31, 2019

T-Works MP10 alloy rear chassis brace

T-Works have introduced a new rear aluminium chassis brace for the Inferno MP10 buggy. Machined from high-quality 7075-T6 aluminium and coming black anodised and with machined silver edge details the brace utilises delrin bushings for the rear bulkhead attachment point that ensures less stress for both the bulkhead and brace, prolonging the life of all parts involved. Included in the set is also gold-coloured mounting hardware.

View another image here