Red RC

August 31, 2018

Tekno RC Traktion Drive kit

Tekno RC have reintroduced their Trakton Drive. This system gives your electric vehicle a ‘nitro feel’ and improves consistency by reducing the instant acceleration of modern electric systems. Employing a special clutch shoe and spring design to engage the shoes in the clutch bell, it’s engaged at zero RPM and has no lag but still provides some ‘give’ on hard acceleration or impacts. It’s extremely helpful on loose or rough tracks as it will smooth the power delivery as the vehicle traverses through bumps. If you’re a nitro and electric racer, this system will make transitioning between the two vehicles easier as your electric vehicle will feel more like a nitro.

Source: Tekno RC [teknorc.com]

August 31, 2018

Infinity IF18 bumper spacer set

In order to optimise performance for all track conditions, Infinity has released a new bumper spacer set for their IF18 1:8 onroad chassis. The set is inserted under the front bumper to adjust body height where needed, in particular when running on bumpy race tracks. Offering a smoother driving feel, the kit also includes M4 aluminium nylon nuts & M4x12mm titanium flat head screws.

Source: Creation Model [creationmodel.net]

August 31, 2018

MIP YZ2 DTM2.0 Puck 17.5 drive system

MIP’s popular Puck 17.5 drive system is now also available for Yokomo YZ2 DTM2.0 buggy. Its been a long process to get everything just right with the S3 and S4 arms and the amount of tuning options in the Yokomo YZ2. The lightweight, aluminium-based system is a replacement for the standard steel items and includes a 2-piece aluminium outdrive cup and aluminium outdrive hub assembly, two pairs of Bi-metal bones (for S3 & S4), and the replaceable plastic orange wear Pucks™ that take the place of the inferior steel pins. This combination greatly increases the longevity of the drivetrain and most importantly decreases the drivetrain’s overall rotating mass by about 50 percent. The decrease in weight directly results in quicker acceleration, deceleration, and lower motor temps, making it ideal for 17.5T stock racing classes.

Source: MOD [modspeedshop.com]

August 31, 2018

RC Discharger 40A Resistor Bank for iCharger Duo

A first product from RC Discharger is this 40A resistor bank for the iCharger Duo which has a optional stand for the charger itself along with space for the power supply. Made in the USA it can discharge your LiPos from 1S to 10S but doesn’t heat up thanks to its fan cooled box enclosure. Ready to use, it easily and neatly plugs into your iCharger, comes in 6 different colour options and has a 90 day warranty.

View more images here

August 31, 2018

Montech LTS-GT bodyshell

Montech have introduced their new LTS-GT bodyshell for the M-Chassis category as well as use in the popular GT12 series. Produced using the highest quality polycarbonate, the package includes the decals, window masks and screws the fix the wing. Available in standard weight and lightweight La Leggera versions.

Source: Mon-Tech [mon-techracing.net]

August 30, 2018

JConcepts 1993 Ford F-250 Stampede body shell

Another new Traxxas Stampede body shell from JConcepts is the 1993 Ford F-250. For the ninth generation, the body-shell of the 1993 F-Series was given another major upgrade and now a direct fit for the Traxxas Stampede. To further improve its aerodynamics, the forward bodywork was given a slightly lower hood line, and a rounding of the front fenders and grille. The “Blue Oval,” a trademark of all Ford pickups, makes a striking appearance centered in the grille. Stout fender flares are carved ever so carefully in to the panels while openings allow for a vast assortment of tires on the market. The F-250 single-cab look is strong and is a careful reminder of a time when passengers sat side-by-side during a typical outing. The body comes clear and includes an authentic decal sheet and easy to use window mask for the detailed hobbyist and it fits the original Stampede truck as well as the Skully, Craniac and Bigfoot kits.

View more images here

August 30, 2018

SRT BH6015 HV brushless servo

SRT have introduced their new BH6015 HV brushless servo for 1/10th on-road applications. Offering a speed of down to 0.05s and up to 15kg-cm of torque, the servo utilises a combined metal and composite case for lower costs while the brushless motor and mixed titanium and aluminium geartrain ensure high performance and durability. The low-profile servo comes with a 180mm receiver wire with universal plug and it will hit stores very soon.

View a list of the specifications here

August 30, 2018

T-Works M17 screen protector

Coming from T-Works is a screen protector sheet for the all-new Sanwa M17 transmitter. The crystal clear protective sheet is easy to apply and a direct fit and it prevents the radio’s screen from becoming scratched or damaged. In addition it is keeping away finger prints while making for easier cleaning.

Source: T-Works [rc-tworks.com]