Red RC

June 21, 2018

Jesper Rasmussen sweeps Danish EP Off-road Rd4

Round 4 of the Danish 1/10th Electric Off-road nationals was held at the Glostrup Racing Club in mixed weather conditions. In the 2WD Mod Buggy class Team Associated’s Jesper Rasmussen took the TQ from Yokomo’s Frederik Hovgaard who also scored a round TQ. Over in the 4WD Mod Buggy class it was also Jesper with the TQ from Frederik, however Jesper was able to TQ all rounds for a clean sweep. In the triple 2WD A-mains Jesper brought home wins in A1 and A2 for an early overall win as Frederik Hovgaard came in 2nd from Lasse Bak (Yokomo) 3rd. After the 4WD finals it was again Jesper with the overall from Lasse Bak 2nd as Frederik Hovgaard had to settle for 3rd following some difficult A-main legs.

View the 4WD podium here

June 21, 2018

Yeah Racing Execute XQ1S carbon fibre upgrades

Yeah Racing have introduced a line of carbon fibre upgrade parts for the Xpress Execute XQ1S touring car. Available now are a 2.25mm carbon fibre chassis, a 2.0mm topdeck, 3mm floating servo mount upper plate, 3mm front and rear shock towers as well as a 2.25mm bumper plate. All parts are direct replacements for the standard fibreglass items and they were designed to improve overall rigidity and precision when running in medium to high-bite racing conditions or when seeking an overall lower weight.

View the other new parts here

June 21, 2018

FX K302 engine & exhaust combo set

FX Engine’s latest engine and pipe combo to hit the light of the day is the K302 engine and EFRA 2131 exhaust set. The off-road specific 3-port engine comes including an EFRA 2131 exhaust and a medium radius manifold. The engine’s design makes for a linear power curve in combination with low fuel consumption and it features a ceramic main bearing, a DLC-coated crankshaft and a low centre of gravity cooling head.

Source: FX Engines [fx-engines.com]

June 21, 2018

GL Racing R8 LMS 1/28th body shell

GL Racing have introduced their forthcoming new Audi R8 LMS body shell for 1/28th micro on-road cars. The officially licensed body will support 98mm wheelbase chassis, it features front and rear 78mm wide wheel arches for optimised race performance and it is made of durable material. The lightweight and low centre of gravity body also utilises a front body mount that features whole front splitter support to prevent damage as well as a flat underbody and it comes with wing mirrors and antenna moulded flexible plastic.

View another image here

June 21, 2018

Gmade BOM 1/10th 4WD trail truck

Gmade have released first information and images of their forthcoming BOM 1/10th scale 4WD trail truck. The kit builds on a scale-looking ladder frame constriction with stand-up front shock and laydown rear dampers that make way for the scale roll cage construction. The steering servo is located in the front part of the chassis and the steering assembly is of a zero-Ackermann design for maximised steering performance. Angled front king pins minimise the scrub radius for further increased steering efficiency. The heavy-duty threaded aluminium shock absorbers utilise 3.5mm shock shafts and the transmission, with all-metal internal gears, is of a torque twist reducing design. Optionally a 2-speed hi/lo transmission conversion will become available to add speed when needed. The kit is rounded out by grippy tyres, a cool looking body shell a couple of scale accessories.

View more images here

June 21, 2018

Double Ceramic ceramic motor bearings & lube

Double Ceramic from California have introduced their new ceramic motor bearings as well as their ceramic-infused bearing lube. The first product is focusing on reducing magnetic interference around the motor to maximise electric motor performance. The full ceramic 540 motor Bearing achieves this with the use of Zirconium Oxide balls and races, which has 80 percent less friction than bare chrome steel balls, while also being 40 percent lighter. This results in less centrifugal force on the balls and less heat generation between the balls and races. The bearing also uses a variation of Double Ceramic’s custom moulded PEEK cage, resulting in no magnetic interference in brushless motors, resulting in quicker spool-up and higher RPM. The Full Ceramic motor bearing also contains no shielding, further reducing friction and increasing high RPM capability.

Continue reading here

June 21, 2018

RC Aurora ARR V2 6200kV sensored brushless motor

PPM have introduced the new RC Aurora ARR V2 6200kV sensored brushless motor for 1/28 scale vehicles. The motor features a new can design that allows to use the power plant in an even wider range of cars such as the GLR, GLA, BZ and SZ kits. The V2 sports a single sensor port and easy to reach heavy duty solder tabs and it is available now, coming also in a 7000kV variant.

Source: PPM [ppm-rcracing.com]

June 21, 2018

Queensland State Titles – Report

The 2018 1/10 Off-Road Queensland State Titles were held at Sunshine Coast’s Valley Raceway in Queensland, Australia last weekend. The event titles saw drivers from the local clubs and some drivers from NSW come to race on the Valley Raceway track on a lovely Queensland winter weekend. The club had done some changes to their layout, adding some of the 1/8 track jumps to the 1/10 layout, providing some great racing over the weekend. With the slippery track 2WD Mod was always going to be about smooth driving, from early on it was going to be the battle between the Australian champ, Christopher Sturdy and the 2017 state champ Alex Bernadzik, Christopher Sturdy taking Q1, Q2 and Q4 to take out the TQ with Alex in 2nd and Mitchell Pratt in 3rd. A1 and A2 was all Christopher Sturdy taking the title over Alex Bernadzik with Mitchell Pratt in 3rd.

Continue reading the report here