Coming from Yokomo and made for their Racing Performer series of brushless motors are machined titanium screws. While saving weight the screws also have less influence on the magnetic field of the motor, compared to the standard steel fasteners, which results in increased RPM, enhanced agility and better overall performance. Included are three M2.5x8mm and three M2.5×44.5mm screws in a natural silver finish.
The opening round of this season’s South Swedish Cup was held at the Vetlanda Arena over the weekend. Building on her success at the recent second round of the Middle Swedish Cup, Kyosho’s Jessica Palsson again swept the competition, bringing home the TQ, overall win and best junior trophy. Starting from the 2 spot into the 30-minute A-main final she would ultimately leave pole position holder Hampus Berg (HB Racing) behind, bringing home the win some 23 seconds in front of Hampus as Pontus Larsson (Serpent) rounded out the top 3 results. Behind the three, Emil Magnusson (Kyosho) came in 4th and Jonas Dalensjö (HB Racing) made up the top 5.
Thanks to Jessica Palsson for the report.
Round 1 of the Swiss 1/8th E-Buggy Nationals was held at the MNCJ Courgenay track last weekend. After the three qualifying rounds it was Team Associated’s Patrick Hofer with the overall TQ from Kevin Zwahlen (HB Racing) in 2nd, the latter scoring a single round TQ. In the finals Patrick was hampered by making too many mistakes which allowed local hero, Kevin Zwahlen to win A1 and A3 for the overall as Patrick had to settle for 2nd overall. Romeo Grass (Xray), who started from P3 into the triple A-mains, was able to conserve his qualifying position to round out the podium.
Thanks to Patrick Hofer for the report.
The second round of the WORS Tour was held at Kelowna RC in the Okanagan Valley, British Columbia. Robert Sorjonen would secure the TQ in both the 1/10 4WD Modified Buggy and 1/8 E-Buggy classes and he would went on to win the 6-minute 4WD Mod main some seven seconds in front of runner-up, Mike Wetmore as Tyrell Wilkinson rounded out the top 3 result. Over in 1/8 E-Buggy Sorjonen wasn’t able to match his qualifying performance as it was Richard Infanti with the win a lap ahead of Robert after the 10-minute A-main encounter. Jason Mardon would come in 3rd, some 8.5 seconds behind Robert.
The ORRA track in Arendonk played host to round 3 of the Belgian 1/10th Buggy Nationals last weekend. Wesley van Helmond had a bit of a troublesome 2WD qualifiers that were rain-hit but he would come out on top after the A-mains to take the day’s win from Nick Vranckx and Wouter Wynen 3rd. In 4WD Wesley would start from pole and despite scoring a DNF in A2 he was able to bring home another win with Nick Vranckx 2nd and David Dafke 3rd.
Hiro Seiko have announced the addition of two new anodising colours to their range, making it ten different colour shades in total. New and available from now on are pink and green surface coatings for their popular aluminium hex screws that allow users to further personalise their gear – be it chassis, radios, tools and more.
Source: Hiro Seiko [hiro-seiko.com]
RC-Mission have introduced their new bulkhead alignment tool for the Xray T4 touring car and similar kits with 19mm bulkhead spacing. The alloy jig will be inserted between the left and right bulkhead with the included steel shafts further adding support to the assembly. With the block and pins in place the owner can now loosen and retighten both the lower bulkhead mounting screws and also the upper bulkhead and shock tower fasteners for perfect alignment of all parts involved. When all parts are straightened up, the pins and block will be removed, the diff or spool installed and the bulkhead covers attached. The tool is usable for all T4 platforms.
SRT have announced the soon release of their new 1/8th off-road specific BH927R and BH922R servos. The BH927R (0.07s/27.0kg-cm) is the high-torque variant while the BH922R (0.055s/22.0kg-cm) offers higher speeds. Both standard size servos were developed with competition 1/8th off-road racing in mind, however they are also usable in on-road and 1/10th applications. They base on the popular BH9027 and BH9022 servos but utilise more durable steel and titanium gears over the aluminium and titanium geartrain found in the four-digit servos. Also part of the packages are HV brushless motors and all-metal cases for speed, torque and durability.
