Red RC

March 5, 2018

Rivkin, Tessmann & Evans win at Desert Classic

This past weekend the annual Desert Classic was held at Hobby Action RC Raceway in Arizona. The track has a very unique type of dirt that provides extremely high traction, that even increased during the weekend, and then the surface breaks up a little bit which can make it edgy and very challenging. In the premier 2WD Modified Buggy class it was Team Associated’s Spencer Rivkin with the win from AE teammate, Dustin Evans in 2nd. Xray’s Ty Tessmann, who started from 6th on the grid, made some good progress thanks to various setup adaptions and he would ultimately bring home the final podium spot.

Continue reading the report here

March 5, 2018

RC Cars Cavalieri MP9 carbon fibre shock towers

RC Cars Cavalieri from Germany have expanded their range of carbon fibre option parts for the Kyosho MP9 TKI4 with the introduction of front and rear shock towers. The front tower is machined from 5mm material while the rear tower uses 4mm carbon fibre. The towers will reduce overall weight compared to the stock aluminium items, they fit both the TKI4 and older spec TKI3 and they are available separately or as a complete set.

View more images here

March 4, 2018

Sobue wins A2, new TITC Champion to be crowned

In a dramatic turn of fortunes TITC 2018 is going to see the crowning of a new champion as Akio Sobue took the win in an action packed A2 at RC Addict. Having spun out on the opening lap of the opening encounter, defending champion Bruno Coelho looked to have returned to his qualifying form but with a comfortable lead the Xray driver flipped in the sweeper dropping down the order and out of contention for a third consecutive win at Asia’s most famous race. Coelho was initially followed by A1 winner Alexander Hagberg but was given a huge break when Naoto Matsukura ran into the back of the Swede with Sobue the benefactor moving up to second. Moments later however that became the lead as on the same lap Coelho touched the curbing and flew off the track. Also taking advantage of the two incidents, Marc Rheinard suddenly found himself in second which he would hold to the end after seeing off a valiant challenge from Hagberg. A similar battle went on behind with Meen Vejrak seeing off Coelho for 4th.

Continue reading this report here or view our complete event coverage here.

March 4, 2018

Samix SCX10 II brass rear brake adapter set

Coming from Samix and made for the Axial SCX10 II trail truck is a brass rear brake adapter set with mock-up brake discs and brake callipers. The adapters are designed for the use with he Samix rear lock outs and attach to the rear axle, adding 61g of weight per side for greater stability and improved climb performance. A black surface coating and gold-colour edge details round out the visual appearance. To up the scale looks the adapters can be equipped with the included fake brake discs and callipers.

View another image here

March 4, 2018

Schelle B6.1 alloy rear hubs & low front wing mount

Schelle Racing Innovations have introduced new option parts for the Team Associated B6.1 buggy in the form of alloy rear hubs and a low front wing mount. Starting with the rear hubs, the proven 2-piece design allows fine-adjustment and increases durability as the upper cap design can space away from the main hub with ballstud shims, allowing racers fine in-between adjustments for the rear upper link location. The upper caps are shared with the B6 and B64s design, with the same parts used both left and right. The upper cap design with a shorter washer stack reduces leverage on the outer ballstud, as well as increasing shock clearance for the turnbuckle. The hubs are available for the 67mm driveshaft setup in the B6.1 and B6.1D kits, they come in black or blue finish and they are also available as the B6.1 Carpet Hub Set, a black version which comes with -2mm upper caps and ballstuds specifically for carpet racing.

Continue reading here

March 4, 2018

Hagberg wins exciting first A-Main

Alexander Hagberg took the win in an exciting opening A-Main at the TITC, the Xray driver withstanding intense pressure from Infinity’s Akio Sobue to cross the line 17/100ths in front. Having had the perfect week leading up to the A1, reigning champion Bruno Coelho’s domination came to an end on the first lap. Starting from the TQ, he would lose his Xray approaching the front straight spinning in front of the pack with Naoto Matsukura unable to avoid him. This let second place qualifier Hagberg go to the front with Sobue in tow and closing. All over the back of the leader, fourth place starter couldn’t find a way by with an attempt at the end of the front straight resulting in contact. With Sobue waiting on Hagberg to retake the lead, this brought Meen Vejrak into the lead battle but after a couple of laps the Yokomo driver dropped off give Sobue breathing room for a second attempt to pass but Hagberg kept his composure to secure the win.

Continue reading this report here or view our complete event coverage here.

March 4, 2018

Xray 1-2 for TITC A-Main

It will be an Xray 1-2 on the grid for the TITC A-Mains later today at RC Addict In Thailand as a P2 in the final qualifier this morning bumped Alexander Hagberg up two spots to start second behind team-mate & Top Qualifier Bruno Coelho. Having wrapped up the overall TQ in the fourth round of qualifying yesterday, Coelho would complete a clean sweep of qualifying, again topping the times in the sixth & final round this morning. Behind the Xray duo, the attack is set to come from Infinity with Naoto Matsukura third ahead of team-mates Akio Sobue and Marc Rheinard with 2017 race contender Jilles Groskamp also making the grid for the team albeit in 10th spot. For last year’s podium finishers Nicholas Lee and Ronald Volker, its been a tough event with both finding themselves in the B-Main with Meen Vejrak Yokomo’s top hope staring 6th on the grid ahead of team-mate Naoki Akiyama.

Continue reading this report here or view our complete event coverage here.

March 3, 2018

ONE aluminium parts tray with tool support

Capricorn have introduced the ONE brand aluminium parts tray with tool support to clean up pit and work spaces. The tray is machined from high-quality aluminium, it features milled-out compartments that can be used to arrange small parts such as wheel nuts, body clips and more, and in addition the tray comes with a water-cut foam that takes a range of tools to have them handy without messing with pit space. The tray comes with a black and golden finish and laser-etched One logos.

View another image here